How to Replace Starter 2011-2016 Hyundai Elantra
HTML-код
- Опубликовано: 7 ноя 2022
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/68/7/starters
This video shows you how to install a starter on your 2011-2016 Hyundai Elantra. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.
This process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaYg/1AXAA00013
• Phillips Bit in a Ratchet 1aau.to/oaW/1AXAA00149
• 19mm Wrench 1aau.to/oJJ/1AXAA00010
• 10mm Socket 1aau.to/oaIz/1AXAA00017
• 12mm Socket 1aau.to/oaYB/1AXAA00015
• 14mm Socket 1aau.to/oaYB/1AXAA00015
• Trim Tool Set 1aau.to/oSV/1AXXX00006
• Locking Pliers 1aau.to/oh9/1AXAA00139
• Pliers
• Side Cutters
• Ratchet 1aau.to/obcr/1AXAA00016
• Socket Extensions 1aau.to/oaYB/1AXAA00015
• Torque Wrench 1aau.to/oaiG/1AXAA00044
• Drill
• Bungee Cord
• Gloves 1aau.to/ovz/1AXSS00048
• PAG Oil
• Safety Glasses 1aau.to/oqr/1AXAA00343
• Wire Ties
• Drain Pan 1aau.to/osH/1AXAA00320
• Funnel 1aau.to/ofy/1AXAA00310
• Pick 1aau.to/oCG/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This video is fantastic. This guy demonstrates how to remove all front end components in order to give you better view of the starter, hoses, and bolts. He stated unequivocally, "You don't have to remove all of these." Saved this video for radiator replacement.
Replacing the starter simply requires 20 minutes. To disassemble the starter, remove the wiring bracket from the engine's bottom, unscrew two bolts from the rear, lower the starter, and take out the electrical connector and positive wire.
Thank you!
Yesterday I replaced a starter on 2015 Elantra 1.8 L that has the same build and engine. All I did from the top was to disconnect the battery terminal nothing else. Every thing was done under the car. You need to jack up the car and remove the bottom splash shield that has four 10 mm bolts and few plastic clips that takes 10 minutes to remove and then you see the starter above the oil filter with much easier access to remove the main 12v cable and signal connector to the starter. Two 14 mm bolts are also easy to access, remove them and then there is one 10mm bolt to detach the wiring harness bracket to make some room and starter comes out from the bottom without much effort. For me it was much easier to do it from the bottom and saved me time and effort.
+S Ulla Thanks for watching our video! 1aau.to/m/Shop-TRQ
This is why people hate taking their vehicles to dealerships. So much extra cost to change a simple part.
All you guys are complaining about the way they did it but didn’t actually watch the entire video.. he said right in the beginning that he only removed the excess stuff to show y’all the location and get a better view
16:25 is what you’re looking for
Why not just show how to replace from the bottom. This ways the easy way for the mechanic to make a few extra bucks lol
Facts.
Thanks for the details! Some guys Been posting videos with no info nor illustrations. You da'man
0:04 for those wondering why he removed all that stuff.
Good video on showing removal of the bumper and radiator. A much quicker and easier approach would be (1) disconnect battery cables (2) remove the air cleaner (2) remove the air cleaner box in front of the battery to expose the top of the transaxle, so that the starter mounting bolts are easy to see and remove from above (3) remove the starter from below, and in that process remove the lower end of the + cable and the wire to the starter solenoid. This RUclips video shows removal of the air cleaner box: ruclips.net/video/XkrJOw8oeLw/видео.html However the bolts holding the starter are not clearly shown - but after the air cleaner box is out, the bolt heads are very easy to see and to wrench on.
LoL! Bumper removal!? That must be a Korean car 😂
Just show doing it from the bottom
Thank you 🙏🏾
So is the solenoid and starter motor one single assembly? Mine on occasion clicks and after 2-3 attempts it starts up, battery terminals are snug. If its the solenoid does the entire thing need to be replaced?
Imagine bringing your car in for a starter replacement and you walk in to see the entire front end disassembled 😂😂 id lose my shi knowing it's a 20min job from the bottom....
Yes I know he said he didn't have to do that and could've went from the bottom.
U don't have to take all of that off to do a starter, just the intake
People have mentionned it already, but the only thing you need to do is to remove the air filter box. This will open up a large volume of space through which the bolts are easily accessible with an extension.
The biggest problem is inserting the new starter as there is a wiring bracket in the way. Slipping the starter out and through is fine but when time comes to put the new one in, it' almost impossible. To be honest, I did not even touch the bracket nut. I simply bent the bracket slightly, slipped the new starter in and bent the bracket back to its original position.
PROTECTIVE GOGGLES STRONGLY RECOMMENDED. SO MUCH DUST AND RUST. PROTECTIVE GLASSES FAILED TO PREVENT CONTACT
+Miditree Thanks for the feedback! 1aau.to/m/Shop-TRQ
Is there anything attached to the starter that could effect fuel efficiency? I just changed mine a few days ago and it seems like I'm burning through gas quicker than it should
The starter fuel relay
Do you have a video for replacing a starter on a 2016 hyundai Accent?
+@Shaffer1987 We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ
Ur dismantling half the car it's way easier than that
What a pain in the A## engineering job
these designs are.😂
That is totally wrong tutorial man you don't need to remove radiator and bumper
Failed to mention what engine this is for. Thumbs down 👎🏽