Greetings from Venezuela, excellent video, thanks for sharing your knowledge. A question of how many ohms is the resistance and how many watts? What function does it do?
It's power ceramic resistor, probably rated for about 20W. It will limit the current in case that there is still short somewhere. It is even better to use dim bulb tester instead of such resistor.
@@aknkurk3644 IIRC incandescent bulb for dim bulb tester should have about twice as power in comparison to tested device. Thus, for most LCD TVs 100W bulb will do the job. You may even make dim bulb tester with two bulb sockets in parallel and combine bulbs you need for specific device. There is a lot information about dim bulb testers out on the web, just search and you will find everything.
I enjoy watching you troubleshoot, it's both an art & a skill, always something more to learn. I also repair an occasional TV I am here in US. Have you ever accidentally cracked a panel and if so, do you compensate the customer or do you tell them that you are not responsible due to the risk?
Sometimes I do tell them. If the customer's TV is 75 inches in size and it is a backlight problem, I refuse to repair it, one wrong move the panel will crack. Thank you for enjoying watching my video. God Bless.
Hi engineer After repairing the board by soldering the resistance in both ends of the burnt fuse, if there was an open connection, how would you know if there is a resistance? And the presence of that resistance will not cause problems in operation and voltage measurement
gud am sir tanung kulang po sana kung anu po ibig sabihin ng v8-MSV59PA-144V002 SV: NC St3151A05 _ 8 may nag bblink po kc n ganyan s screen ng t.v. anu po kaya dahila nyan.? sana po masagot at mpansin po itong ktanungan new subscriber po salmt..
Thanks
Thanks
Nice video Thanks
Thank you
Big thumbs up from Postman Pat. Nice to see a demonstration of the PFC circuit in operation.
Hi dear tevz .
frist thanks for saying the model of the tv
Second you are one of the best tv technicion in all the would.
Brilliant watching you repairing this TV. Thanks for your time and effort. Great upload. 👍👏👍👏🏴
Thanks sir for sharing this video,, always share boss para may idea lagi
Thank you for your time today to teach me
Great job Mr Tevs! I am catching up again. Best wishes.
I'm happy that you catching up again. Thank you and Best wishes too.
Good day great job master thankfully for sharing
Very good my teacher.😊
Wow, I always watch your videos, very good, thank you
So nice of you
electronic master good teacher always
Hola... cuántos "ohm" tiene la resistencia. ??
Gracias !
Hi Tevz, great video again. Practical as always and straight to the problem, fix it, done!
Nice your video sir
سلام خیلی عالی
thanks 👍👍👍
Greetings from Venezuela, excellent video, thanks for sharing your knowledge. A question of how many ohms is the resistance and how many watts? What function does it do?
220 ohms 5watts I guess. It acts like a voltage limiter and prevent the board from frying other components.
Son muy buenos tus videos sigue asi aspirando ese mugrero de los teles poco lo haces creo
Thanks for the knowledge
Why do you connect a big resistor? And Is it a high wattage one or a high ohmage one? What is the point please?
I do narrate it in the video what is the point.
@@tevzTVTevatronics What is the W value of the resistor?
@@etube8967 220 ohms 20 watts
Thanks for sharing Mr,Tevs
sir tevz meron ka po fb page? may itatanong lng po salamat 👍👍 galing nyo po mag repair ❤
Great! Thanks from Sweden.
sir one,s vidieo rt809f please you are jinion master
Will do soon
Watching from Cavite
Thank you Mr. Tevz, good job. 👍
Nice
What does the stone resistor you soldered to the fuse do? Can you show us how to make it?
It's power ceramic resistor, probably rated for about 20W. It will limit the current in case that there is still short somewhere. It is even better to use dim bulb tester instead of such resistor.
@@vitomirspasojevic How many watts should a dim bulb be?sir..
@@aknkurk3644 IIRC incandescent bulb for dim bulb tester should have about twice as power in comparison to tested device. Thus, for most LCD TVs 100W bulb will do the job. You may even make dim bulb tester with two bulb sockets in parallel and combine bulbs you need for specific device.
There is a lot information about dim bulb testers out on the web, just search and you will find everything.
Once again you're TEV'S dats mean the Best!
I enjoy watching you troubleshoot, it's both an art & a skill, always something more to learn. I also repair an occasional TV I am here in US. Have you ever accidentally cracked a panel and if so, do you compensate the customer or do you tell them that you are not responsible due to the risk?
Sometimes I do tell them. If the customer's TV is 75 inches in size and it is a backlight problem, I refuse to repair it, one wrong move the panel will crack. Thank you for enjoying watching my video. God Bless.
Thanks for your video
Most welcome
me to enjoy watchn, plz do a courses
Thank you for inspiring me, can i use a 9w, 560R , 5% resistor for testing purposes.
just try it
good
Hi engineer
After repairing the board by soldering the resistance in both ends of the burnt fuse, if there was an open connection, how would you know if there is a resistance?
And the presence of that resistance will not cause problems in operation and voltage measurement
If there is a resistance at the AC or to the DC line. The resistor will heat up, and the voltage to the DC line is not right.
What is the value of series resistance for connection test?
❤Like before watching ❤
👍📺💯
What is the value of that recharge resistor. Please
Okey ngarud!!!
Hi engineer
If we don't have a similar board, how can we determine the amount of ceramic capacitor?
You can use 101 up to 471, 1kv to 2 kv.
@@tevzTVTevatronics So it's not a problem to put an approximation between these values, right?
@@protection4541 right
@@tevzTVTevatronics tnankyou
Great! Thanks.
you are the best
tanx u
More. Video. Up. Lod. Thanks
More to come!
Thanks again sir
سلمت يداك
Thanks tevz ❤
Thanks sir
You are good man
❤ good job
🎉🎉🎉🎉❤❤❤❤🎉🎉❤❤🎉❤🎉
Good job but I want to ask you a question. Why you don't like write your name on the screen?
I want learn more about electronic
gud am sir tanung kulang po sana kung anu po ibig sabihin ng v8-MSV59PA-144V002
SV: NC
St3151A05 _ 8
may nag bblink po kc n ganyan s screen ng t.v.
anu po kaya dahila nyan.?
sana po masagot at mpansin po itong ktanungan new subscriber po salmt..
thx
Ano sir ang problema Kung may voltage SA main capacitor pero wala 12volts at 5volts
Check mo regulator.
😊
👍👍👍👍👍👍👍👍👌👌👌👌👌👌❤❤❤❤❤❤
Jooss
I have had that before many times. Common issue.
где субтитры 😒!!!!....??????
Wait for youtube to creat it.
спасибо @@tevzTVTevatronics
Nice
Thanks