I have the same model Tv spent lots of hours trying to find the issue had permanant green led no sound no picture all voltages on power board got 5v on main board will not turn on , did not know there was a fuse hidden under the black plastic & there is unsteady voltages , you have given me some ideas where to look next time working on it , thanks 👍
Good job! If you use some flux, liquid or paste, it would help solder connections on smd devices. On these I use liquid flux, a drop or two makes a difference on the solder joint. Cheers
what does the 2 diodes and 1 transistor under the heatsink power' mine is making a high frequencey sound like a whistle i only have 25v on one side of the LED flex cable ??
Hello my friend very helpful video one question i have led 32inch tv i have 85 v output for leds black wire not the red wire leds open and then no lights turn on what should i check thank you so much for your help and time any advice.
tevz I have a Sony KDL 46 XBR2 LCD tv that has no red standby light but I can hear a relay and the green power light comes on. No audio or video. Any ideas? Thanks!
hi advice please .have a toshiba that does not turn on at main on off button ,and has a high pitched noise coming from top back of tv.any help appreciated tried soft and hard reset
Tevz , what operating system does this use and can the software be got for it ? I have one and it doesn't load the smart tv part but says it cannot connect to server.
How did a Vestel TV find its way to the Philippines? These TVs are extremely common in Europe, and it's usually shorted diodes in the power supply that kills them. But we tend to just replace the boards because they're available on ebay for a few dollars because there are so many broken Vestel TVs 😂
Dear Tevz, I have a question for You: Have You ever done backlight conversation from CCFL to LED? I have an LG TV with CCFL backlight in which the CCFL tubes and the inverter are broken. I want to replace it with an LED driver and LED strips (same size TV's LED strip). If You have similar job, please present a video to us! Thanks!👍
Good job Sir. I like your explanation
Thanks and welcome
It was pretty hard to find...Bravo !
Nice job bro, I am from Bangladesh
Good day sar, Thanks for finding out thé direction of voltage, may God give you more expérience
More power and more wisdom and knowledge to you master Tevs.Godbless you!!
excellent job.
I admire you as a teacher and would like you to translate Thai as well.
That's a nice one sir, I pray for long life, good health, more knowledge and understanding in Jesus name amen
amen
galing mo talaga master tevs.. salamat 👍 👍 👍
Good work sir ❤
Thanks ✌️
Bunas noches colega excelente trabajo , saludos desde Argentina.
Waoooooh I didn't expected this. A capacitor is causing all these problem.
Only master like can do this.
Hats off. ❤👍
I love your videos it helps me with my business
newbie is watching master
Now that was a nice fault. Well done maestro.
Wow idol ang galing nyo!!!
I have the same model Tv spent lots of hours trying to find the issue had permanant green led no sound no picture all voltages on power board got 5v on main board will not turn on , did not know there was a fuse hidden under the black plastic & there is unsteady voltages , you have given me some ideas where to look next time working on it , thanks 👍
What OS does this take ?
Good day Mr tevz 👍
good job sir >>>>>>>
Another great job,thanks for sharing
Teşekkürler ustam. Sağlıklı günler dilerim.
Great. On 0:50 on the right down, is this an amateur radio?
It is a battery
Very good video 🎉
Good job! If you use some flux, liquid or paste, it would help solder connections on smd devices.
On these I use liquid flux, a drop or two makes a difference on the solder joint.
Cheers
💖💗💓 God
I'm from iran
HI
the best reparing.❤❤❤❤
Hey, thanks
Magandang Gabi Sir Heheh😁😁😁
سلام خسته نباشی استاد
good video sir thanks.
Most welcome
Good job boss
Thanks
Good job
Thanks
Each time of measuring, please place your multimeter nearby testing point so that we can see both 🙂
what does the 2 diodes and 1 transistor under the heatsink power' mine is making a high frequencey sound like a whistle i only have 25v on one side of the LED flex cable ??
However,nice job Master!
Thanks!
thanks 👍👍👍
Welcome 👍
Good boy
Hello my friend very helpful video one question i have led 32inch tv i have 85 v output for leds black wire not the red wire leds open and then no lights turn on what should i check thank you so much for your help and time any advice.
check the LEDs if there is open of them.
@tevzTVTevatronics thank you for your time I will check
Great 👍!
Please upload more repairs of the Vestel mainboards 😅
Seguimos aprendiendo, saludos.
Tvez ou fè bon twavay!
tevz I have a Sony KDL 46 XBR2 LCD tv that has no red standby light but I can hear a relay and the green power light comes on. No audio or video. Any ideas? Thanks!
hi how do you discharge the capacitors in the primary area?
hi advice please .have a toshiba that does not turn on at main on off button ,and has a high pitched noise coming from top back of tv.any help appreciated tried soft and hard reset
check the power supply.
Thanks sir
شكرا لك من القلب--
Good job tevz …can you please help to find the ckv line on sony bravia 55xe8505?
Hi sir I like to c your videos but the background sound very very loud some audio
Thanks
Assalam Veri God short dress country
Hi engineer
Thank you for answering the questions.
which country are you
Philipines
@@tevzTVTevatronics nice to meet you
Hi dear tevz .
It was a beatiful &hard fault and you did a great job.
But I wanna know how you found out the cap was 4.7 MF 50 volt?!
You can use 2.2 MF to 100 MF for a rail line filter.
Thanks Mr tevz.
ottimo video mi stai insegnando molte cose per facilitare le riparazioni grazie dove trovo il software per il telefunken main 17mb140
❤ u sir.
sir why dont use hot air reworkstation
Tevz , what operating system does this use and can the software be got for it ?
I have one and it doesn't load the smart tv part but says it cannot connect to server.
How did a Vestel TV find its way to the Philippines? These TVs are extremely common in Europe, and it's usually shorted diodes in the power supply that kills them. But we tend to just replace the boards because they're available on ebay for a few dollars because there are so many broken Vestel TVs 😂
Dear Tevz,
I have a question for You:
Have You ever done backlight conversation from CCFL to LED?
I have an LG TV with CCFL backlight in which the CCFL tubes and the inverter are broken. I want to replace it with an LED driver and LED strips (same size TV's LED strip).
If You have similar job, please present a video to us!
Thanks!👍
watch this ruclips.net/video/qC_LH1fk5Fg/видео.html
@@tevzTVTevatronics thx!
Greeting sir am a technician base in amplifier can i ask question in tv to you
Hello sir, I always find “ena” written on lunch plates
Can you tell me its meaning?
enable
❤
mr tevz are you on what up sir
sorry I dont have.
so how can you assit me in electronics sir@@tevzTVTevatronics
Toshiba led tv.. Vestel inside 😅
17PW07-2 LTA320HN-02
I don't know
good job boss
Thanks sir