One time I'll try do that , the tv work fine, but after short time can back, may be the power MOSFET of forward work so hard with 300 volts. Hope you are lukie this time. Excusme my bad English, Im Spanish from Argentina.
Hello. If there is a short circuit in the circuit again after the repair, how will you notice the short circuit despite putting resistance in the circuit input
Hello Tevz I have been very trill with your levelled deep and vast knowledge in electronics I really appreciate your relentless instructive posts of which am one of most benefited .may GOD reward you, I had a pfc issue with 26 inch Samsung lcd when I did the bypass it couldn't work .Please help how do I boost 300vdc to 390vdc to make it work thnx a lot
The only way to boost it to 390 volts is to repair the PFC. There are resistors connected to the main capacitor that you can modify to somehow start the main power supply. Example a resistor connected to b+ of the main capacitor value of 3.3 mega ohms. try to parallel a 2 mega ohm of that resistor which is connected to the B+ main capacitor.
Pienso que para aumentar la tensión de 300 voltios se podría intentar hacer un doblador de tensión como traían los viejos tv de TRC que servía para trabajar con 110 y 220v.
Resp Sir! Very Nice Sir. Sir My HP Monitor Balack Sreen CPU Connected after Vertical Lines Sir Where the Problem Sir Please Advise Sir. -- ChinnaRao Paderu Andhrapradesh
hello your video concerning food interests me. I have to admit that I didn't understand anything. can we remove the mosfet and cut a line and it works? help me I don't understand. I want to understand .
sir i have a question about mosfet removing and replace to wire from schematic if you 300v and gnd are connected i think a short have can you explain pleaase and big thank
Thank you so much you are a great teacher I have be facing this problem for so long you have given me solution today ❤❤❤
Good job thanx for sharing Mr Tevz the master of electronics
Thanks for watching!
very good job, i thing you are the king of repairmen
Saludos mi amigo, presente en su nuevo video, saludos desde México.
Informative indeed
Hello sir fewest day a go I do not seen your post I hope there is no problem thank for your good job
All good
This is phenomena 😮
nice job master as always
Thanks. Good. Information 💯
I've known the pfc to fail on atx psus. Good video and always appreciated your work x
Thanks 👍
Merci bon travail comme toujours
Very nice vdo sir ❤
Thanks you it is very interested sir.
بروفيسير والله تسلم ايدك
Helo I am fan of tevz your channel always watching
Very good video 🎉
Sir can you make 1 videos explaining the schematic diagram of TV power supply with pfc section that will be helpful for us
Your all video is nice 👍👍👍👍 u
💐very nice video sirji thank you,,,,,, 🙏.
Hello, Tevz. I hope you're well 🎉
Thank you for sharing host
It's my pleasure
any body can givme a hint by the way goood work sr yor videos are very good
salamat sir sa video,God bless..
One time I'll try do that , the tv work fine, but after short time can back, may be the power MOSFET of forward work so hard with 300 volts. Hope you are lukie this time. Excusme my bad English, Im Spanish from Argentina.
Thanks, sir, for sharing this video
good work
شكرا،لمشاركة التجربة
thanks for helping us cos we are learning from each of ur videos
Thank you sir
Hi sir iam in tamilnadu
Did you repair that tv?
amazing
Thanks
👏👏
How much did it cost the client...
Hi friend thank you for the informative video
Thanks for sharing God bless
Good job sir ❤
Thanks a lot for the video.👍
Hello. If there is a short circuit in the circuit again after the repair, how will you notice the short circuit despite putting resistance in the circuit input
Thank you
Terima kasih pelajarannya
Hello Tevz I have been very trill with your levelled deep and vast knowledge in electronics I really appreciate your relentless instructive posts of which am one of most benefited .may GOD reward you, I had a pfc issue with 26 inch Samsung lcd when I did the bypass it couldn't work .Please help how do I boost 300vdc to 390vdc to make it work thnx a lot
The only way to boost it to 390 volts is to repair the PFC. There are resistors connected to the main capacitor that you can modify to somehow start the main power supply. Example a resistor connected to b+ of the main capacitor value of 3.3 mega ohms. try to parallel a 2 mega ohm of that resistor which is connected to the B+ main capacitor.
Pienso que para aumentar la tensión de 300 voltios se podría intentar hacer un doblador de tensión como traían los viejos tv de TRC que servía para trabajar con 110 y 220v.
Great work as always thank you.may you consider show how to modifiy dual mosfet power supply like what you do with str w6053 .thank you
Resp Sir! Very Nice Sir. Sir My HP Monitor Balack Sreen CPU Connected after Vertical Lines Sir Where the Problem Sir Please Advise Sir. -- ChinnaRao Paderu Andhrapradesh
cut ckv
Thanks
❤❤❤❤❤❤❤
Greetings from Venezuela, excellent video, one question: what resistance did you place for protection?
220 ohms
good Hello, I am confused. Will it work or not when PFC is removed in all TVs?
Thanks sir
Where can I find a video describing such a pcb with its diagram please
Harang
hellow you took two pices of the board it realy don need them for the right wayb t work of the tv , I don understend how it work whitout the mosfet
You just short the connection of the diode which is directly goes to the output and cut the mosfet connection, is that it?
yes
Thank you sir ji🙏🏻
Most welcome
hello your video concerning food interests me. I have to admit that I didn't understand anything. can we remove the mosfet and cut a line and it works? help me I don't understand. I want to understand .
keep watching
why did you cut the trace that power the PFC circuit IC? removing the PFC transistor and diode was not enough?
Hola tevz y como hace la fuente el suicheo quede perdido si quito el mosfet y el pfc quede gringo como decimos en nuestro pais🤔
I just removed the PFC become like a normal power supply circuit.
Resistance value type please sir
220 ohms
Thanks sir
MOSFET& rectifier also shorted?????? what's going on?& mian capacitor?????
sir i have a question about mosfet removing and replace to wire from schematic if you 300v and gnd are connected i think a short have can you explain pleaase and big thank
No short, look at the diagram.
But you have replace thé MOSFET of wire in vidéo Big thanks❤@@tevzTVTevatronics
@@techniqueskhalid9873 that was a diode, not the mosfet.
❤❤❤ thank you Sir@@tevzTVTevatronics
Hello, do you always bypass PFC if it is defective?
if necesary
hello po san po location nyo and san po kayo ma cocontact?
Sir idol dina po ba aalisin ang WD40 sa board, ang ibig kopo sabihin dina po ba lilinisin like thinner po?
hindi na
WD40 is non conductive, its safe to use on circuit boards..
На люмінесцентних лампах не запрацює
The process will not always work🙂
لقد اوقفت عمل pfc
21:42. ?! Video editing
ther,s adestortion near you
I don't know??? I would think that you wouldn't have to remove components and just jumper wire to bypass the PFC.
what's the meaning of the pfc?????
power factor correction
😂
Greetings: WD40 Mixed With Electronics? Hmmmm. O goody. U DIY / Ujunk idiots do that
...but Not in my shop!