QFN/MLF SMD Reflow Soldering

Поделиться
HTML-код
  • Опубликовано: 21 дек 2024

Комментарии • 31

  • @JeanSantini884
    @JeanSantini884 5 месяцев назад +1

    Hi There friend ! whats the kind of flux do you use ?

  • @justbehappy9617
    @justbehappy9617 8 месяцев назад

    New subscriber here.
    Hello sir. May I know what solder flux and solder lead are you using?
    Also the soldering iron temperature?
    Soldering tip?
    It's a big help for me to know these as I am having problem with the IC I want to replace. Thanks a lot in advance.

  • @raaooffpublic6026
    @raaooffpublic6026 Год назад +2

    Perfect work sir , i learned alot from your video

  • @KrotowX
    @KrotowX 3 месяца назад

    I'm more than sure that you use hot bed or other PCB bottom heater here. Why hide that? On 4+ layer boards it is not possible to get off chips with thermopads with hot air only. Learned that in hard way.

  • @nutrajangyee4806
    @nutrajangyee4806 Год назад +2

    what heat temperature and air flow ?

    • @Negiku
      @Negiku 8 месяцев назад +1

      There is no standard for what to use. I personally prefer 400°c and 30-40% airflow and solder them in 10-15 seconds. These chips can take a beating

  • @imintuitive3472
    @imintuitive3472 Год назад +2

    Can I use hair dryer instead of heat gun? Or any alternative method to remove smd component if not having heat gun? Kindly guide brother.

    • @ericastier1646
      @ericastier1646 Год назад +5

      cheap air reflow station cost no more than a good quality hair dryer. I don't think hair dryer gets hot enough.

    • @KrotowX
      @KrotowX 3 месяца назад +1

      No. Hair dryer is not hot enough and spread the airflow too wide to be effective.

  • @waferlayout
    @waferlayout 7 месяцев назад

    Heat temperature?
    😁

  • @PálFodor-g1r
    @PálFodor-g1r 7 месяцев назад

    A folyasztószer típusát megírná ? Köszönöm !

    • @ivan8895-p8c
      @ivan8895-p8c 6 месяцев назад

      nc559 ?

    • @PálFodor-g1r
      @PálFodor-g1r 6 месяцев назад

      @@ivan8895-p8c Köszönöm ! NC559-ASM ? ROLO TÍPUS.

  • @bvdmedia
    @bvdmedia Год назад +1

    Heat temperature?

    • @mafia6724
      @mafia6724 Год назад +2

      360

    • @ericastier1646
      @ericastier1646 Год назад +1

      @@mafia6724 that's pretty high. 320 is safer to avoid thermal shock damages on ic.

  • @RixtronixLAB
    @RixtronixLAB Год назад +1

    Nice video, well done, thank you for sharing it with us :)

  • @lucianorenteria1481
    @lucianorenteria1481 8 месяцев назад

    Puedo apostar que esa pistola de calor no tiene no aire ni calor.

  • @TechnicalUmesh1
    @TechnicalUmesh1 Год назад +1

    Nice

  • @qemmm11
    @qemmm11 Год назад

    Looks so hard 🤭🫡

    • @mrBDeye
      @mrBDeye Год назад +1

      That’s what she said !!!

    • @waferlayout
      @waferlayout 7 месяцев назад

      👍

  • @medvidekpetr4397
    @medvidekpetr4397 Год назад

    Nice
    Hmm najs : D

  • @kpanat
    @kpanat 4 месяца назад

    Нанести припой чтобы потом собрать? Ерунда какая-то... Да и слшком много лишних действий... Первый раз что ли?

  • @onlyseanss
    @onlyseanss 10 месяцев назад +3

    Worst soldering video I’ve ever seen

    • @samuelgordon1155
      @samuelgordon1155 10 месяцев назад

      Can you than please recommend a good one? I am trying to learn.

  • @sleeply4cat
    @sleeply4cat 8 месяцев назад

    Кошмар.

  • @mdmoinMd-ch8cw
    @mdmoinMd-ch8cw 4 месяца назад

    This video cutting and fake

  • @fredfred7169
    @fredfred7169 10 месяцев назад

    mdr not pro