DO NOT remove the back first. You will tear the ribbon cable for the fingerprint sensor. It must be unplugged and freed up before removing the back. This should be in the description.
@@FreshTechCo I'm guessing he means don't pull it away from the phone after separating it. But keep it very close until you do? Not sure. I agree, makes little sense as stated.
I don't think the process changes at all. To put on the new glass screen, the sensor wire goes behind the battery. To remove the old screen so a fresh unbroken screen can be put in, requires this process. Most complicated fix I've had to try, but cheaper than new phone
My repair person says he need a specific glue to put together my moto g 5 stylus 5g. Can you please tell me what kind of glue you used go I can get my phone back.
Don't just use any glue. You can but if you use something like superglue replacing the screen again will be a real challenge. You wanna use a contact adhesive for screens or good double tape all which you can Google. Don't USE Super glue.
@@deathloopgamer8872 Also important, he's using a specialized applicator. You shouldn't just get a children's bottle of glue with a large nozzle because any mess you make risks spilling over into the circuitry which can become a fire hazard due to short circuiting (and some glues are highly electrically conductive). @james mcfarland Notice that the points of contact from the casing to the glue is a thin line even less than 1 millimeter.
@@everonbrown2499 I recently received mine from Phone Remedies. They have their own website. Be careful and do your due diligence when purchasing sensitive parts and replacements from Amazon. Some manufacturers are cheaply made and many are sourced from low-cost Chinese factories. Even "expensive" options on Amazon can be cheaply produced but are marked up for high profit margins. When it comes to your personal or business Smart phone, invest your time and money to protect your phone.
This video helped immensely, the hardest part was removing the old adhesive. Thanks!
Thanks a lot kindly share the video farther
It would be nice if it had some narration so you know what stuff he's doing at what point and what type of glue he's using and so on and so forth
This is an example of what not to do.
DO NOT remove the back first. You will tear the ribbon cable for the fingerprint sensor. It must be unplugged and freed up before removing the back. This should be in the description.
Thanks for suggestions 🙏
Geeze thanks for the late response smh
@@BalrogslayerXD9 i did this too lol
So, if you don't remove the back first, how do you get to the fingerprint sensor to unplug it?
@@FreshTechCo I'm guessing he means don't pull it away from the phone after separating it. But keep it very close until you do? Not sure. I agree, makes little sense as stated.
'This type of screwdriver.' Ah, the blur tip
I am glad you showed how to put it back together😄 getting ready to fix my husbands phone
Thanks for the video! How would the process change if I just need to change the glass screen?
I don't think the process changes at all. To put on the new glass screen, the sensor wire goes behind the battery. To remove the old screen so a fresh unbroken screen can be put in, requires this process. Most complicated fix I've had to try, but cheaper than new phone
that was so relaxing.
Quick note. It's a to hex, not a 5 pointed star
My repair person says he need a specific glue to put together my moto g 5 stylus 5g. Can you please tell me what kind of glue you used go I can get my phone back.
You killed the battery
What size was that screwdriver? I want to make sure the set I buy has the right size? 0.8? Thank you for this video, you're a lifesaver.
i'm a year late but was it the .08?
What size screwdriver bit did you use to take the screws out?
Cool thanks for sharing
no test new screen before glueing??
Thank you
I'm missing the proximity sensor rubber band
I just want to replace the glass in front of the screen, is it possible to do so without taking the whole phone apart from the inside out?
Yes but that is not much reliable and not very lost long
I wish you would have shown what glue you used
U can use any kind of glue I also use different and some time I use double tape Aw well .
Don't just use any glue. You can but if you use something like superglue replacing the screen again will be a real challenge. You wanna use a contact adhesive for screens or good double tape all which you can Google. Don't USE Super glue.
B-7000 or e-6000 starts with that and research.
@@deathloopgamer8872
Also important, he's using a specialized applicator. You shouldn't just get a children's bottle of glue with a large nozzle because any mess you make risks spilling over into the circuitry which can become a fire hazard due to short circuiting (and some glues are highly electrically conductive).
@james mcfarland Notice that the points of contact from the casing to the glue is a thin line even less than 1 millimeter.
Can you help me with the the motorola g stylus
Sure any time
I have the 2020 version
Where can I find screen replacement for Moto g stylus?
Amazon
Did your Amazon screen work if so which one you get!?
@@everonbrown2499 I recently received mine from Phone Remedies. They have their own website. Be careful and do your due diligence when purchasing sensitive parts and replacements from Amazon. Some manufacturers are cheaply made and many are sourced from low-cost Chinese factories. Even "expensive" options on Amazon can be cheaply produced but are marked up for high profit margins. When it comes to your personal or business Smart phone, invest your time and money to protect your phone.
I got my new screen can I pay you to fix for me I can mail it to you and how much you charge?
@@everonbrown2499 $40