ah yes you too got slammed with a $65 dollar repair quote for an hour of labor at the risk of soldering. one thinghe forgot to mention is to use an electronic safe adhesive glue, a tube of B7000 will be needed to place the back of it back on.
I'm dealing with the same issue. Different daughter boards for different cellphone antenna receptions for different "regions" of the world, is what I heard that can be the problem! (i.e. XT2115, XT2115-1 , XT2115-2, Xt2115-3, XT2115-4, XT2115-DL
Heat spreader graphite sheet is missing or is bad or not readhered properly, and or u did not use thermo paste between the phone body and motherboard chip... Just a thought
Your video is going to save me $50.00. Took the mystery out out of the repair. Thank You.
ah yes you too got slammed with a $65 dollar repair quote for an hour of labor at the risk of soldering.
one thinghe forgot to mention is to use an electronic safe adhesive glue, a tube of B7000 will be needed to place the back of it back on.
Thank you so much! Like others, I used your tutorial and fixed my phone.
Omg i thought my phone was broken thank you for telling me about this problem you are the best!!! you earned a new sub
Just repaired my phone for $10 cuz of this video, in less than 30 minutes
Everything works great except I don't any signel
I'm dealing with the same issue. Different daughter boards for different cellphone antenna receptions for different "regions" of the world, is what I heard that can be the problem! (i.e. XT2115, XT2115-1 , XT2115-2, Xt2115-3, XT2115-4, XT2115-DL
where did you buy the port?
Thanks for this. I was so disappointed with the poor USB charging port. I love the phone and so did not want to buy a new one. Now I don't have to.
Ok .
I did it, except the back cover wont glue back down. Almost a win
where did you buy your port?
Accidentally cut that black wire when using the spudger. Might have to salvage that from another old phone lol
Thanks! Worked perfectly!
What are the black & white wires for and what do they go to?
If what I am seeing is correct, the black wire is the internal antenna. Its either that or it works with the speaker.
Ok but here's the problem it gets hot at the top when I replace the screen what cause that
Heat spreader graphite sheet is missing or is bad or not readhered properly, and or u did not use thermo paste between the phone body and motherboard chip... Just a thought