Maybe can apply the product on a wooden box and make next video pouring water inside the box to see the water penetrability and effectiveness on the product.
criss cross formation has stronger holding strength between coats compare to 2 coats in one direction. Criss cross also have better coverage to cover the surface missed by the first coat application.
can you tile over this coating? eg outdoor pond, does cement stick to this Pentens T-200H? what about paint? can you paint over this product to give it extra protection eg on cement roof gutter
Hi I have used T-200 about 5 years ago. Now I am having water leaking issues on my concrete roof. Planning to re-coat with same T-200 until i saw your video Pentens T-200H UV. Can I re-coat T-200H UV on top of T-200 ... ? What sort of preparation required before i could paint the existing floor. Thank you.
Firstly, please identify the point of leakages. 2nd, please check the current condition of the T200, is it peeling? Any damages on the cement floor base?
@@ATKCeWarehouse Thank you for your reply. There isn't any damage except noticed some blisters at certain spots. The bubbles are still in tact, haven't burst. Should I scrap it off those bubbles..? Tq
@@venkatesrao99 My suggestion: try to scrap off the blister bubbles or the waterproofing layers. Recoat with primer before applying waterproofing again
@@venkatesrao99 Yes, you may. However, my advice is still to scrap off as much possible the existing T200, reapply primer before finalising with min 2 coats of T200H. Thanks.
Hi boss. I just want to know that is it T007 = 0.2kg/sqm and T200 uv = 0.5kg/sqm was a single coating or double coatiing? I need to calculate the budget & cost😂
@@ATKCeWarehouse Thanks kok gei.. I am planning to do this on my roof, but with rain sometime came in the afternoon, i might do this in the morning, if it does rain after more than 2hours of the first coat would it effect the application? can i dry the 1st coat with a cloth before applying the 2nd or 3rd coat?
@@fahrolfadhlijaafar5474 Just have to make sure that the rain water doesn't wash away the 1st coating. Since it's water based, you don't have to worry about having too much water, but as long as it doesn't create water ponding.
@@kieferlim9602 For rough concrete surface, you can just let it be. Alternatively, you can apply clear coatings on it (gloss/matt) for water repellent.
Hi Kok Gei, Is it necessary to remove the old waterproofing before applying T007 and T200H? I noticed the old waterproofing can't prevent the leakage since the slab got cracked. Is there any filler to prevent the crack from getting worse?
Use a scraper or water jet/ pressure washer to remove the old waterproofing membrane. It is important to repair the cracked lines or any cavities on the substrate surface. Depending on the severeness of the damage, there are few methods.
@@ATKCeWarehouse ok bos tqvm reply.. 👍👍👍.. colour limitations tu kena guna 1 colour sahaja ke? dinding dkt luar tingkat atas rumah sy bila hujan air hujan mcm meresap ke dlm . dnding nampak mcm lembab.. sy dh check. xde paip di situ xde n roof leaking.. tqvm bos reply👍👍👍👍👍😁😁😁
@@abeyus23 The drying time may differs according to the surface and ambient temperature. My advice: Apply waterproofing in the morning or late evening. Yes, you can leave it for 24 hours too.
jenama yg dipercayai..
thank you boss!
Hi boss. How long can we wait Primar T-007 to dry before apply T-200H coating?
Thank you for the video... Pentens should pay you for the video.
I would request more samples to give away to my audience.
upon apply primer Penten 007, what is duration required to apply 1st Coot?
Maybe can apply the product on a wooden box and make next video pouring water inside the box to see the water penetrability and effectiveness on the product.
good idea!
Why do you apply the 2nd coating at right angle to the 1st? I'd like to understand. Thanks
criss cross formation has stronger holding strength between coats compare to 2 coats in one direction. Criss cross also have better coverage to cover the surface missed by the first coat application.
Hi, boleh nak tanya dinding luar rumah boleh ke pakai T007 dan lepas tu pakai t200?
yea boleh!
Hi, can this be use on interior wall like bedroom wall?
yes, but it has limited colours.
which product suitable for fish pond waterproofing cement ?
you may check out sika 1kmy
Would this do well on a picnic table??? I see all of the recommended uses are items that do not get physical use.
are you referring to concrete slab picnic table?
Can this be used to cover external wall cracks and efflorescene. Then can it be painted over with jotashield color?
yes, you may
Why jotashield is fading ?
I guess more 10 years or more than that ?
Hi want to ask for car porch slab n tangki slab cerment is want to using T200 or T200H is better ?
I believe both are similar, only T200H is the enhanced version. Please ensure to follow the application steps.
Wondering if I can apply T-200H with fleece on cracked area for better result?
I am not sure about that, haven't tested it. But commonly, strands of fibre are used for reinforcement.
Hi kok gei. Is t200h tough enough for driveway porch etc?
nope...not trafficable for cars
May I know Pentens and Nippon, which one is better?
both are good.
What waterproofing is use for below grade retaining wall?
Go for bitumen emulsion for retaining wall.
can you tile over this coating? eg outdoor pond, does cement stick to this Pentens T-200H?
what about paint? can you paint over this product to give it extra protection eg on cement roof gutter
I would suggest using T-100 and finish with cement render before tiling works.
Does T200H slippery? Can apply it on bathroom floor for leaking issue?
it's more external or exposed waterproofing area.
@@ATKCeWarehouse does it slippery?
suitable for mosaic tiles ? or also have to combine with primer
Are you applying in the toilet/bathroom? or at your balcony? T-200H is definitely not suitable for area with high traffic volume.
I've question on this product, can it be use for fish pond waterproofing? Is it safe to use for fish pond?
No, this is not a suitable product.
Hi I have used T-200 about 5 years ago. Now I am having water leaking issues on my concrete roof. Planning to re-coat with same T-200 until i saw your video Pentens T-200H UV. Can I re-coat T-200H UV on top of T-200 ... ? What sort of preparation required before i could paint the existing floor. Thank you.
Firstly, please identify the point of leakages. 2nd, please check the current condition of the T200, is it peeling? Any damages on the cement floor base?
@@ATKCeWarehouse Thank you for your reply. There isn't any damage except noticed some blisters at certain spots. The bubbles are still in tact, haven't burst. Should I scrap it off those bubbles..? Tq
@@venkatesrao99 My suggestion: try to scrap off the blister bubbles or the waterproofing layers. Recoat with primer before applying waterproofing again
@@ATKCeWarehouse thank you for the reply. Regarding other area, is it suitable to use T200-H over the existing coat of T200?
@@venkatesrao99 Yes, you may. However, my advice is still to scrap off as much possible the existing T200, reapply primer before finalising with min 2 coats of T200H. Thanks.
untuk slab apply sebelom (plaster render) or selapas plaster render?
T-200H jenis expose. Iaitu, sebagai finishing coats.
Can it apply to the metal roofing?
Yes, it can.
ruclips.net/video/NaBp5lSrTjk/видео.html
Untuk tampal kolah air bocor halus boleh ke?
Hi boss. I just want to know that is it T007 = 0.2kg/sqm and T200 uv = 0.5kg/sqm was a single coating or double coatiing? I need to calculate the budget & cost😂
yes. single coat. usually most people dont even care about this, because it cost alot....
Mana satu yang lebih bagus utk coating atap genting supaya tidak bocor akibat hujan? T200 atau T200H?
Kedua-dua pun boleh. Pastikan menggunakan primer sebelum aplikasi.
Hi, how long should i wait for the T007 to dry before applying T200H? And also how long shall i wait to apply 2nd and 3rd coat of T200H?
ruclips.net/video/qgziSyfgnsU/видео.html
For T007, let it dry for 2-4 hours. And for T200H, recoating between 2-8 hours.
@@ATKCeWarehouse Thanks kok gei.. I am planning to do this on my roof, but with rain sometime came in the afternoon, i might do this in the morning, if it does rain after more than 2hours of the first coat would it effect the application? can i dry the 1st coat with a cloth before applying the 2nd or 3rd coat?
@@fahrolfadhlijaafar5474 Just have to make sure that the rain water doesn't wash away the 1st coating. Since it's water based, you don't have to worry about having too much water, but as long as it doesn't create water ponding.
For driveways in car porch floor, can it be used? Please recommend. Thx
No recommended. As the tyre's traction will damage the waterproofing coating.
@@ATKCeWarehouse Thanks. So what would be best alternative to protect/paint the paveway?
@@kieferlim9602 May I know are you using concrete imprint on your pave way? Or else?
@@ATKCeWarehouse no. Just normal rough concrete surface
@@kieferlim9602 For rough concrete surface, you can just let it be. Alternatively, you can apply clear coatings on it (gloss/matt) for water repellent.
Hi Kok Gei,
Is it necessary to remove the old waterproofing before applying T007 and T200H? I noticed the old waterproofing can't prevent the leakage since the slab got cracked. Is there any filler to prevent the crack from getting worse?
Use a scraper or water jet/ pressure washer to remove the old waterproofing membrane. It is important to repair the cracked lines or any cavities on the substrate surface. Depending on the severeness of the damage, there are few methods.
If it's only fine hair line cracks, use primer or diluted T200h to apply at least 2 coats on it before finish coatings.
Bos klu X cat t007 terus t200h...boleh ke
boleh jugak
Thanks bro.
Most welcome. You can be a good advisor when it comes to waterproofing solutions :)
hi Bos, kalo utk masalah exterior wall waterproofing, u suggest better guna yg mane satu?
Exterior wall bermaksud dinding luar kan? Boleh terus sapukan T-200H, tetapi ada colour limitations.
@@ATKCeWarehouse ok bos tqvm reply.. 👍👍👍.. colour limitations tu kena guna 1 colour sahaja ke? dinding dkt luar tingkat atas rumah sy bila hujan air hujan mcm meresap ke dlm
. dnding nampak mcm lembab.. sy dh check. xde paip di situ xde n roof leaking.. tqvm bos reply👍👍👍👍👍😁😁😁
@@wahidi-mu8gj Pakai warna grey, and sekiranya tiada resapan. Overlap dengan cat warna kegemaran anda.
bos, lepas letak primer, berapa lama kena tunggu untuk next coatting dengan t200h?
Ikut pengalaman, 2-4 jam sudah boleh recoating.
@@ATKCeWarehouse ok bos tq...
1 more bos, 2nd layer t200h better after 8 hrs or it ok if waiting fot 24 hrs?
@@abeyus23 The drying time may differs according to the surface and ambient temperature. My advice: Apply waterproofing in the morning or late evening. Yes, you can leave it for 24 hours too.
@@abeyus23 Most welcome. We can always learn together.