@@ATKCeWarehouse Thank you for responding. Next question. Previously i did had similar Membrane type T-200 applied on this balcony . But soon after rain & sun , somehow it all PEEL OFF . Whst possible mistakes my contractor did ? Thry didn't applied PRIMER ?
@@ooifw5588 1st, did your contractor clean up the concrete surface? 2nd, Primer is recommended, but may not be the cause of peeling. 3rd. I normally advise to apply the waterproofing coating early morning or late evening. (referring to the application temperature).
Hello sir..selepas kita apply primer T007 boleh ka kita campurkan dan gaulkan sekali T100 pro join T305 dan apply ke atas surface yg kita nk buat waterproofing?sy rasa ianya lagi kuat pegangan..di tambah lg dengan fibre netting..
@@ATKCeWarehouse thanks. What penten range system is best suitable for concrete exposed flat roof and protection screed is necessary over the applied area?
Can this waterproofing system contain water?. For example at the planter box, directly apply the draincell without do screeding on top the waterproofing.
For curing purpose, you need to leave it for at least 7-10 days after concrete pouring. You mind to send some pictures over to support@ewarehouse.my attention ANG KOK GEI
Dilution is necessary, if you wish to use it a primer coating. However, still advisable to use T007 primer instead. As the expected heat or temperature rise during the application, you may dilute it to maintain a consistent viscosity during application. Thanks.
Can I apply different types of waterproofing methods to get the advantages of both? For example, layer a bituminous waterproofing layer on top of a cementitious waterproofing or the other way round. Which is better for a green roof?
My balcony is open roof due to that when heavy rain the water didn't flow in the drainage pipe. But when we clear the drainage up hole the water starting to flow down the drainage hole getting green all the times due to this i can see water mark in my car porch wall just me an idea pls
From my understanding, 1) the balcony floor was not leveled towards the drainage outlet. 2) You might need a debris trap - www.ewarehouse.my/index.php?route=product/search&search=debris%20trap
What you can do? 1) Fill up the sides of the drainage pipes with waterproofing membrane or silicone. 2) From the bottom of the slab, please identify the point of leaks and repair the leakages.
@@ATKCeWarehouse I live in double storey. I discovered downstairs ceiling started grown mold. I suspected leaked from top floor bathroom. So thinking apply T-700 and T-100 resolve the issue.
@@khenghuatlim7264 It would be good if you can remove the ceiling and see what's hidden within. We better identify the source of leakages before applying remedy.
hi, after applied T-007 on the floor and it will become tacky right? then how to walk through it to apply the top coat? will it spoil the T-007 if walk on it while applying the top coat?
in this case how long should we wait for 1. t007 to fully dry/cure before applying t-002? 2. t-002 first coat to fully cure/dry before second coat of t-002? thanks
@@kengseong 1. 1-2 hours. 2. 4-8 hours. Application and curing hours may be different due to product substrate, humidity, and application temperature. Hope this helps!
I used t100 for my pond. After applying. There are some places with Bubble.what should I do.i have make sure to use the primer and make sure the surface is clean. But bubble still appears at certain area
Boscoflex is a two-component polymer modified liquid applied flexible cementitious waterproof coating. Boscolastic is a two-component elastomeric acrylic polymer cementitious waterproofing coating that is mixed on site and resurfaced on concrete and other construction materials to waterproof.
The advantage of Boscolastic is in its elastomeric properties, which creates an incredibly thick yet flexible "rubberized" membrane for a tight waterproofing seal. And, it can be elongated approximately 250%.
I am in the mid of preparing content for Pentens Fleseal T-200 UV Resistant Waterproofing Coating, which will explain more about its properties and application. Stay tuned!
@@ATKCeWarehouse when I view their technical data on both products, the data seems similar. Both say elongation break at 150% etc. Try search for the technical data.
Can this be use for normal walls, that later to be painted over? My walls is around the house is damped at the bottom part. Had to redo once in a few year.
Most tiles has glossy finish, which are water repellant. For natural store, example granite, slate or marble, it's strong recommended to apply top and bottom sealer too.
Hi greeting.. saya nak tanya dinding rumah di sebelah toilet lebih kurang 2kaki lembab dan cement render pun pecah2.. Produk apa yg sesuai nak selesai masalah ini ? Tq in advance.
Masalah waterproofing in bahagian tandas. Sekiranya boleh, sebelum pemasangan tiles, kena buat elok2 water proofing di lantai dan juga 2-3kaki pada dinding.
@@ATKCeWarehouse I'm trying to fix an old exterior slab which had water ponding problem. I intend to apply T200 after T007 been applied onto the old painted and some plaster area.
@@UncleRay360 My advice: Fix the ponding issue first, before applying water proofing solution. You may need to level the floor slab to avoid ponding issue.
@@UncleRay360 Can. Have done it with exterior wall. But scrape off any loose paint if any, first. If there are big holes, just use normal cement mixed with water will do and patch them. Seal any cracks , even hairline cracks, with Xtraseal ms-601 sealant or any similar MS polymer product (choose white paste) wait till dry then paint on T-007, wait till dry to sticky texture, then paint on T-200 (2 coats). using pentens fiberglass mesh will make the coating last at least 5 extra years.Make sure no impending rain for 6-8 hours. I don’t work for pentens but i had researched many waterproofing solutions.
Hi, instruction manual says that we need to dilute T-007 with water on a ratio of 1:3 , which is 1 part of T-007 : 3 parts of water. In your video, you did not dilute T-007 primer at all. Can I ask why is that ?
I always believe the thicker the primer the better, and it's more secure. However, I have recently discovered that diluted T-007 primer is easier to apply and better penetration into small pores or craters in concrete surface. There is no right and wrong here. If thin layer coating, we usually need to apply more than just 1 later.
I just completed another video on Pentens T-200H, which I have primed the T-007 with 3 parts of water. You might want to see the difference as compare.
Firstly, it really depends on the type of cracks. If hair line cracks, you may dilute the T-007 with water and apply on the lines before applying the top coats.
For slab, which 1 is better solution? 1. T007 + T200H 2. T007 + T100 (from my contractor, this T100 is not UV resistant & not suitable for exterior) Pentens T200H vs Nippon Paint Flexiseal 200, which 1 is preferred?
For option 1, you may start apply directly to the existing. For option 2, after T100, you need to apply a layer of cement render. You may apply T200 or Flexiseal after this for extra layer of protection. I believe both products are similar, you may find more information at our website www.ewarehouse.my
very interesting video, can you recommend a product that can seal the ceiling and walls? my apartment's ceiling and walls sometimes are damp if the upper floor unit uses the bathroom a lot.
There are possibilities waterproofing failures or leakages from the upper floor. It will be more effective to seal the leakages from the upper level. Maybe you can email me some pictures at support@ewarehouse.my before I can advise further. Thanks again.
Good
Thanks
Tq sir for sharing
Most welcome.
T-700, is 2 layers better?
T-007? yes.
If it is already T200 but already crack, should i apply t007 on top of t200?
@@GoodDAY-ft3vv 1st, try to scrap off the t200 and reapply t007 again. If the crack lines is serious, you may have to repair it first.
If no place the cement screen on final layer can ?
Not advisable.
Hi Brother, my porch was leaking. Can u advice and how to purchase it?
You may visit our webstore at www.ewarehouse.my
kegunaan T-200?
Untuk exposed area waterproofing, boleh rujuk video ah gei.
Boleh digunakan pada lantai yg lembab ke?
boleh jugak...tapi cuba cari "moisture barrier"
Which one is better t100 or t200
May I know what's your application?
MaY I KNOW In what situations we need to lay waterproofing membrane on the toilet bed ?
It is recommended to apply waterproofing system on toilet or bathroom, even if it's at the ground level.
mcm ni lh senang fhm..terima kasih.
Terima kasih atas pujian anda!
I thought the T-007 instruction is to dilute 1:3 with water but you used it concentrated.
Bos..boleh ke 1st layer saya sapu T100..biarkan kering selama 8 jam,Lepas Tu 2nd layer saya sapu T200H..untuk slab konkrit yg bocor.
selepas t00, apply 1 layer of cement render.
Klu saya terus pasang tiles boleh kah?berapa ketebalan simen Yang sesuai?
For exterior Rooftop
Must layered with Fiberglass ?
What if i skip Render Cement , then paint with Weatherbond paint ?
Preferably layered with fiberglass, but this is not necessary.
For T-100, you must apply a layer of cement render on top.
@@ATKCeWarehouse
Thank you for responding.
Next question.
Previously i did had similar Membrane type T-200 applied on this balcony . But soon after rain & sun , somehow it all PEEL OFF .
Whst possible mistakes my contractor did ? Thry didn't applied PRIMER ?
@@ooifw5588 1st, did your contractor clean up the concrete surface? 2nd, Primer is recommended, but may not be the cause of peeling. 3rd. I normally advise to apply the waterproofing coating early morning or late evening. (referring to the application temperature).
Rupanya tak tinggi kos nk baiki lantai
Begitulah....tengok budget jugak
How long can it last...
It depends on the substrate, surface conditions and weathering.
Finally I found a channel from Malaysia. It's really important because I am sure I can purchase those item, because it is available in Malaysia
Thanks coach!
Hello sir..selepas kita apply primer T007 boleh ka kita campurkan dan gaulkan sekali T100 pro join T305 dan apply ke atas surface yg kita nk buat waterproofing?sy rasa ianya lagi kuat pegangan..di tambah lg dengan fibre netting..
better follow instruction application. Theoritical, macam akan lebih padu.
The tiling is possible using Cement slurry over Pantene applied verticall wall and any issues please
Yes, once you have apply finishing waterproofing membrane, you may apply a layer of fine cement render before tiling works.
@@ATKCeWarehouse thanks. What penten range system is best suitable for concrete exposed flat roof and protection screed is necessary over the applied area?
@@sunilkumararickattu1845 You may use T200 or T200H for direct expose area, provided less traffic at that area.
Can this waterproofing system contain water?. For example at the planter box, directly apply the draincell without do screeding on top the waterproofing.
For this type, please apply a layer of cement render.
I have my roof slab for water tank leak after 1 week completion.Leak is small but i am not happy..What should i do?
For curing purpose, you need to leave it for at least 7-10 days after concrete pouring. You mind to send some pictures over to support@ewarehouse.my attention ANG KOK GEI
Hi, why no water is added to T007? Is adding water with ratio 1:3 an option or compulsory?
Dilution is necessary, if you wish to use it a primer coating. However, still advisable to use T007 primer instead. As the expected heat or temperature rise during the application, you may dilute it to maintain a consistent viscosity during application. Thanks.
My house Walls are leaking, i think the pipes under the walls are leaking, is this product helpful in this conditions??
Nope, you have to fix the root cause. Hack the walls and fix the leakages first.
Can I apply different types of waterproofing methods to get the advantages of both? For example, layer a bituminous waterproofing layer on top of a cementitious waterproofing or the other way round. Which is better for a green roof?
Yes, for example. You may use T100 followed by cement render, and finished with T200 (exposed).
Kudos to you. You are answering to almost all question i guess. Keep up the good work
Doing my best. May not know all he answers, but i try.
Boss….can this pentens applied to the walls ? Can it acts as coating or sealer ? Thanks
For T-100, you need cover it again with a layer of cement render.
if membrane is open up at the jointing..what pentens product do u recommend to seal the opening? pentens have too much product
Appreciate if you can email me the pictures to support@ewarehouse.my
What is the rate these range of products? And i need these product to india... Is it availabale on india?
Nope, it's not available in India at the moment.
@@ATKCeWarehouse I need these product to india...And i need the rate these range of products... Is it available?
My balcony is open roof due to that when heavy rain the water didn't flow in the drainage pipe. But when we clear the drainage up hole the water starting to flow down the drainage hole getting green all the times due to this i can see water mark in my car porch wall just me an idea pls
From my understanding, 1) the balcony floor was not leveled towards the drainage outlet. 2) You might need a debris trap - www.ewarehouse.my/index.php?route=product/search&search=debris%20trap
What you can do? 1) Fill up the sides of the drainage pipes with waterproofing membrane or silicone. 2) From the bottom of the slab, please identify the point of leaks and repair the leakages.
Want to ask... I had apply this T100 to an external wall... Does it required to apply any finishing coat?
It should be T200 instead of T100 for external wall application.
@@ATKCeWarehouse Thank you for the reply...
@@choongwaiheng-8101 Most welcome. I learn too
Can T-100 be top surface on my tile bath room? Thanks
Nope, T-100 is not suitable for exposed area. May I know what's the issue with your current tiles?
@@ATKCeWarehouse
I live in double storey. I discovered downstairs ceiling started grown mold. I suspected leaked from top floor bathroom. So thinking apply T-700 and T-100 resolve the issue.
@@khenghuatlim7264 It would be good if you can remove the ceiling and see what's hidden within. We better identify the source of leakages before applying remedy.
@@ATKCeWarehouse
Thanks for the tips. Perhaps will ask contractor to see it
@@khenghuatlim7264 Most welcome. I am learning as well.
hi, after applied T-007 on the floor and it will become tacky right? then how to walk through it to apply the top coat? will it spoil the T-007 if walk on it while applying the top coat?
For T-007, it will be more dry. T-100 will be more tacky.
in this case how long should we wait for
1. t007 to fully dry/cure before applying t-002?
2. t-002 first coat to fully cure/dry before second coat of t-002?
thanks
@@kengseong 1. 1-2 hours. 2. 4-8 hours. Application and curing hours may be different due to product substrate, humidity, and application temperature. Hope this helps!
@@ATKCeWarehouse hi Kok Gei. Thanks for the information!
@@ksyap2634 Most welcome.
Apa perbezaan T100 dan T200
Primer & Finish coat. Boleh refer video saya yang lain untuk maklumat lanjut.
I used t100 for my pond. After applying. There are some places with Bubble.what should I do.i have make sure to use the primer and make sure the surface is clean. But bubble still appears at certain area
For T-100, you need to apply another layer of cement render on top of it as T-100 is not suitable for exposed area.
what's the difference between boscolastic and boscoflex?
Boscoflex is a two-component polymer modified liquid applied flexible cementitious waterproof coating. Boscolastic is a two-component elastomeric acrylic polymer cementitious waterproofing coating that is mixed on site and resurfaced on concrete and other construction materials to waterproof.
The advantage of Boscolastic is in its elastomeric properties, which creates an incredibly thick yet flexible "rubberized" membrane for a tight waterproofing seal. And, it can be elongated approximately 250%.
I am in the mid of preparing content for Pentens Fleseal T-200 UV Resistant Waterproofing Coating, which will explain more about its properties and application. Stay tuned!
@@ATKCeWarehouse when I view their technical data on both products, the data seems similar. Both say elongation break at 150% etc. Try search for the technical data.
@@allenperera6158 Let me check with Bostik
Price??
www.ewarehouse.my/search?search=pentens%20waterproofing
Can this be use for normal walls, that later to be painted over? My walls is around the house is damped at the bottom part. Had to redo once in a few year.
You can try using T-007 primer.
Hi bos,untuk apply pada bilik air boleh tak,sebab Ada leak.
bilik air yang sedia ada?
Tile,Ada leaking pada bahagian tepi dinding
@@azuramaria3495 Produk T-100 kurang sesuai. Sila rujuk bawah
www.ewarehouse.my/index.php?route=product/search&search=sika%20703
I thought tiles are already waterproof?
Most tiles has glossy finish, which are water repellant. For natural store, example granite, slate or marble, it's strong recommended to apply top and bottom sealer too.
Possible waterproofing failures can be the cement grouting lines, and the drainage outlets.
Hi greeting.. saya nak tanya dinding rumah di sebelah toilet lebih kurang 2kaki lembab dan cement render pun pecah2.. Produk apa yg sesuai nak selesai masalah ini ? Tq in advance.
Masalah waterproofing in bahagian tandas. Sekiranya boleh, sebelum pemasangan tiles, kena buat elok2 water proofing di lantai dan juga 2-3kaki pada dinding.
Penyelesaiannya, kena repair bahagian dalam toilet sebelum bahagian luar.
Mcm mn nak waterproofing tandas tanpa pecahkan tiles sedia ada? Sbb klu nak pecahkan makan kos juga tu.. ada suggestions x encik?
@@ahmadfirdaus9515 ruclips.net/video/GyWs5eXpQB8/видео.html
@@ahmadfirdaus9515 ruclips.net/video/2AXetGop89w/видео.html
Bro it's already expired!
Really? I didn't notice.
@@ATKCeWarehouse bruh!
@@ATKCeWarehouse its on the middle of the container dude!
@@marcusjaden1760 Opss...will check it out.
Hi, I just bought the 007 primer, approximately how long to wait until it become tacky before applying the top coat ya? Thank youu.
Please allow it 1-2 hours to dry. For better adhesion, leave it for 6 hours or more.
@@ATKCeWarehouse I see thanks a lot !
Let me know if you encounter any further issues. Thanks
@@emraelinda1134 the manual doesn't say to wait for it to dry. It says to apply top coat when it feels sticky. you have to feel it with your fingers.
@@allenperera6158 if it's still sticky, will it get torn when walk on during top coat? thanks
Can Pentens T-007 apply on painted surface or plaster surface? TQ
Yes, I have tried on fiber cement board which is similar to plaster surface. But, what's your purpose?
@@ATKCeWarehouse I'm trying to fix an old exterior slab which had water ponding problem. I intend to apply T200 after T007 been applied onto the old painted and some plaster area.
@@UncleRay360 My advice: Fix the ponding issue first, before applying water proofing solution. You may need to level the floor slab to avoid ponding issue.
@@UncleRay360 Can. Have done it with exterior wall. But scrape off any loose paint if any, first. If there are big holes, just use normal cement mixed with water will do and patch them. Seal any cracks , even hairline cracks, with Xtraseal ms-601 sealant or any similar MS polymer product (choose white paste) wait till dry then paint on T-007, wait till dry to sticky texture, then paint on T-200 (2 coats). using pentens fiberglass mesh will make the coating last at least 5 extra years.Make sure no impending rain for 6-8 hours. I don’t work for pentens but i had researched many waterproofing solutions.
Good explanation.
Hi, instruction manual says that we need to dilute T-007 with water on a ratio of 1:3 , which is 1 part of T-007 : 3 parts of water. In your video, you did not dilute T-007 primer at all. Can I ask why is that ?
I always believe the thicker the primer the better, and it's more secure. However, I have recently discovered that diluted T-007 primer is easier to apply and better penetration into small pores or craters in concrete surface. There is no right and wrong here. If thin layer coating, we usually need to apply more than just 1 later.
I just completed another video on Pentens T-200H, which I have primed the T-007 with 3 parts of water. You might want to see the difference as compare.
@@ATKCeWarehouse any links to share ? sure will take a look on it.
@@leslieng9635 Hang on, I hope to release the video next week!
Is Pentens T-007 good for covering Concrete Roof cracks on Terrace?
Firstly, it really depends on the type of cracks. If hair line cracks, you may dilute the T-007 with water and apply on the lines before applying the top coats.
slmt sejahtera boss. bumbung konkrit rumah sy sudah bocor. air meresap
masuk dalam simen dan menitik dalam rumah. t200 @ t100 yang sesuai?
t200, pastikan anda bersihkan permukaan bumbung dan liputi dengan T-007 primer.
so t200 lebih sesuai utk bumbung yang terdedah dgn cahaya matahari dan hujan?
@@hijaukuning2217 Yes.
@@hijaukuning2217 Ya betul
tq2
Sy suka la Lee Chong Wei
OK.
Untuk apply second and third layer tu terus apply atau tunggu kering dulu
Tunggu sehingga kering yeah.
For slab, which 1 is better solution?
1. T007 + T200H
2. T007 + T100 (from my contractor, this T100 is not UV resistant & not suitable for exterior)
Pentens T200H vs Nippon Paint Flexiseal 200, which 1 is preferred?
For option 1, you may start apply directly to the existing. For option 2, after T100, you need to apply a layer of cement render. You may apply T200 or Flexiseal after this for extra layer of protection. I believe both products are similar, you may find more information at our website www.ewarehouse.my
very interesting video, can you recommend a product that can seal the ceiling and walls? my apartment's ceiling and walls sometimes are damp if the upper floor unit uses the bathroom a lot.
There are possibilities waterproofing failures or leakages from the upper floor. It will be more effective to seal the leakages from the upper level. Maybe you can email me some pictures at support@ewarehouse.my before I can advise further. Thanks again.
very informative
Thank you so much.
Should join both tile together and paint. More interesting, once cured try to pull apart to see the elasticity of the product.
Good idea, definitely will take note of this for my upcoming videos
Hello sir...after applying t007 and then t100...without applying cement render after that...open balcony surface...is it ok? Tq
after apply min 2 coatings of T100, please apply later of cement render on top of it.
@@ATKCeWarehouse if used t200...doesnt need cement render...right?
@@jalaljamal100 Yes, but please make sure min 2-3 coatings.