can i paint the surface using penten t200h after applying this to the concrete ? or just leave the concrete bare naked ? can last how long in outdoor situation ?
Hello sir. Can I use this product alone to coat the bathroom tiles for waterproofing? Also, can it be used to coat on the peeled concrete wall before repainting? Thank you.
@@ATKCeWarehouse since this PYE not suitable for tiles, what other product would you recommend for ceramic tiles (for both glossy and non glossy tiles)? Thanks.
My bathroom floor is leaking water to the wall/floor because the floor drain hole is located in the same area. Applying this on the grout and tiles joints at the leaking area will stop the leaks from seeping into the wall behind, right? This needs to be applied after a few years? Do you think epoxy coating for bathroom floor is a better more permanent option?
I’m looking for a sealer for my concrete candle jars… i will pour hot wax.. and eventually the customer will burn the candle… so need something that do not allow the wax to penetrate the surface of the concrete and heat safe… do you suggest any sealer to me… i want less toxic too.. dont want the sealer to release any toxic when burning…
Hi nak tanya, bilik anak saya bercat pink, then naik mold. Apply this PYE waterpruf boleh tak? Boleh elakkan mold tk? sbb permukaan lembab. Kalau hujan, luar akan basah smpai ke dalam itu yg naik mold.
Menarik product ni bro.. kebetulan skg sy tengah ada projek waterproofing & structure repair.. boleh consider utk guna..
Boleh bro! Tiada masalah. PM for more information.
can i paint the surface using penten t200h after applying this to the concrete ? or just leave the concrete bare naked ? can last how long in outdoor situation ?
any idea on how to remove efflorescence? especially on tiles
I believe the efflorescence you mentioned occurred at the edges of tiles. Correct?
Can you paint over this without degrading the seal?
I don't recomment.
Can we use it fot mud wall or rammed earth wall
not recommended, due to porous substrate
Hi, just wondering for a concrete kitchen..what sort of protection u need? Tq²
Try find a food safe coating.
Hello sir. Can I use this product alone to coat the bathroom tiles for waterproofing? Also, can it be used to coat on the peeled concrete wall before repainting? Thank you.
Preferably untreated surface.
Can this be used on concrete roof tiles?
yeah..without painted preferably.
Hi, is this product suitable for sealing grout?
yes.
For external wall with mosaic and tiles, it should work very well.
Can i use this in tile grout?
Well, i would suggest to repair or redo the grouting lines instead.
Can use for tiles?
more suitable towards natural stones or slates
@@ATKCeWarehouse since this PYE not suitable for tiles, what other product would you recommend for ceramic tiles (for both glossy and non glossy tiles)? Thanks.
@@marcuschay8962 May I know what's your purpose? You may try epoxy paint.
My bathroom floor is leaking water to the wall/floor because the floor drain hole is located in the same area. Applying this on the grout and tiles joints at the leaking area will stop the leaks from seeping into the wall behind, right? This needs to be applied after a few years? Do you think epoxy coating for bathroom floor is a better more permanent option?
The source of the issue might be just waterproofing at the drainage outlet. If possible, open up the drainage cover and check for voids.
Thanks for the demo. Will it last if apply on exterior wall?
It would be better on bare wall, to allow the waterpruf to seep inside.
Where is getting this
www.ewarehouse.my
Marble. Colour. Chenge. Jaints
Can use for paver block?
Yes, I did use it on paver block and grass pave.
Hi ..How long... before you have to reapply it back? Tq
about 1-2 hours depending on type of substrate. Please make sure you "flood" it.
@@ATKCeWarehouse ok..tq...then how many months/ year before tou have to do it again...
@@roslizannordin For silicone based, I would suggest a recoating after 2-3 years. However, it does depend on the weathering and climate conditions.
I’m looking for a sealer for my concrete candle jars… i will pour hot wax.. and eventually the customer will burn the candle… so need something that do not allow the wax to penetrate the surface of the concrete and heat safe… do you suggest any sealer to me… i want less toxic too.. dont want the sealer to release any toxic when burning…
You may try to search, water based or food safe sealer.
Will it retain heat… because the surface can get hot while the candle is burning..
@@introvertamma I'm not sure about this.
Hi nak tanya, bilik anak saya bercat pink, then naik mold. Apply this PYE waterpruf boleh tak? Boleh elakkan mold tk? sbb permukaan lembab. Kalau hujan, luar akan basah smpai ke dalam itu yg naik mold.
minta buat waterproofing first. Try sapu kat dinding luar.
Hello Raja Hindustani ki samajh mein
thank you
Tidak diobati