Do It Yourself | How to apply Pentens T-200H UV Resistant Elastomeric PU Waterproofing Coating

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • Pentens T-200H UV Resistant Elastomeric PU Waterproofing Coating is based on a newly developed water-based polyurethane and acrylic polymers. It dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings. It takes the majority of the heat load off a building’s skin and reduces temperatures to approximately that of outside shade.
    Uses
    Pentens T-200H is a one-part elastomeric cross linking latex copolymer emulsion designed as exposed waterproofing coating on:
    • RC gutters and planter boxes
    • Floor slabs
    • Roof decks
    • Wood siding/ Fences
    • External wall
    • Flat roof
    • Metal roof
    • Concrete structures
    Advantages
    • High elongation.
    • Can resist to ponding water.
    • Water-based, environmentally friendly.
    • Air and UV protection.
    • Easy-cleaning and weather resistant.
    • Chemical resistance and waterproof.
    • User friendly, suitable to use on any surface.
    • Adheres well over aged, galvanized and metal roofs, wood, asphalt or aluminum coatings, polystyrene foam insulation, polyester plastic panels, precast flat concrete and barrel cement tiles and many roofing materials.
    • Prevention of ravages of acid rain, freeze thaw, cycles, sunlight, bacteria and fungus.
    • Non-toxic.
    For more information, please visit www.ewarehouse.my - Malaysia's Largest Home Improvement Online Store.
    #atkcewarehouse #homeimprovement #pentens
  • ХоббиХобби

Комментарии • 76

  • @hann_de_pann
    @hann_de_pann 3 года назад +2

    Another Malaysian here subscribed. Please keep this series going, I'm thinking of doing these on my roof and hoping to learn more from your channel! 🙆

  • @amcra4science
    @amcra4science 6 месяцев назад +1

    What is that white colored membrane you painted on. Are we supposed to assume apply directly to concrete? or have to buy/use that membrane? bingung

    • @ATKCeWarehouse
      @ATKCeWarehouse  6 месяцев назад

      that's fibre cement board. you may directly apply to the concrete surface.

  • @dore5647
    @dore5647 2 года назад +4

    Hi, I applied T200H and added cement render on my bathroom wall (interior wall)(quite high, not possible to wet during use of bathroom). Not yet painted. Then last night, after overnight rain, I saw 2 patches of water droplets on the wall surface.
    1. I only applied one layer of T200H. Is that the cause?
    2. Can I directly apply T200H again on the 2 small patches? Or must I scrape off the cement render in the two patches first before reapplying T200H?
    3. If I apply T200H directly on the 2 patches (without scraping off cement render), later, will there be any problem when I do painting? Can paint stick to the T200H coating?
    Thanks🙏😀

    • @ATKCeWarehouse
      @ATKCeWarehouse  2 года назад +2

      First, T200H is meant to used for exposed aream and not suitable to have another cement render on top of it. However, for your case, I believe that you have to check the external walls/ balcony/ flat roof connected to this bathroom for the root cause.
      1. No.
      2. Not recommended, until you found the root cause.
      3. It doesn't solve.

    • @dore5647
      @dore5647 2 года назад +2

      @@ATKCeWarehouse Noted with thanks.
      So, about no. 3, you mean paint cannot stick to the T200H surface?

    • @dore5647
      @dore5647 2 года назад +2

      @@ATKCeWarehouse
      One more question:
      In my case, if I want to make my wall waterproof, but also able to paint it later, which Pentens waterproof product should I use if not T200H? Thanks.

  • @tuanlam1314
    @tuanlam1314 Год назад +1

    i was quoted by contractor today of 9k... after watching this i think i could do it mayb less than 2k

    • @ATKCeWarehouse
      @ATKCeWarehouse  Год назад +1

      You can also email us at support@ewarehouse.my if you have any other concerns.

  • @suann7407
    @suann7407 3 года назад +2

    Hi...May i ask whats the difference between t-200 and T-200H...which should i buy...

    • @allenperera6158
      @allenperera6158 3 года назад +2

      T-200 is acrylic based. T-200H is acrylic mixed with PU. T-200H is better

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад

      In term of base resin ranking, you are correct.

  • @Ro66y_C
    @Ro66y_C 3 года назад +2

    Great video, what sealer can we use for patching hair line cracks?

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад +1

      For hairline cracks, you may use this Pentens T-007 cement modifier as primer. Another intermediate advice, you may dilute Pentens T-200H with -12 parts of water, and brush on the surface cracked lines and let it dry thoroughly. Thereafter, continue with you first coating of Pentens T-200H.

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад +1

      However, if the cracked lines are severe, you might need to hack it slightly and apply grouting cement before applying Pentens T-007 Cement Modifier.

    • @Ro66y_C
      @Ro66y_C 3 года назад +2

      @@ATKCeWarehouse Ok thanks for the tips

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад +1

      @@Ro66y_C Most welcome.

    • @kengseong
      @kengseong 3 года назад +2

      @@ATKCeWarehouse hi what grout cement you would recommend?
      thanks

  • @melvinchangchunghow4151
    @melvinchangchunghow4151 Год назад +1

    Hello, For concrete/zinc roof, these set of pentens compare to SikaCoat -500 which better?

    • @ATKCeWarehouse
      @ATKCeWarehouse  Год назад +1

      T200H is the enhanced version of T200. While Sika 500 comes with added fibre reinforcement. 2 different type of product.

  • @Lifestartat40s
    @Lifestartat40s 3 года назад +1

    I want to apply 'paint' in toilet. What is the different between epoxy paint.

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад

      Most of the videos I have watched, featuring epoxy resin with flakes to refurbish the entire toilet. You may use epoxy paint to paint the walls, but for floor tiles or long lasting, you have to apply "epoxy primer".

  • @admusosman6983
    @admusosman6983 3 года назад +1

    Tuan.. Sebelum saya guna cara tersebut. . Dinding atau lantai cocreate tersebut.. Perlu diplaster dulu atau sapu premier base dulu dan T200 sebelum dinding lantai diplaster.

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад +1

      Permukaan lantai concrete selepas diconcrete akan dilapiskan dengan cement render (campuran pasir & simen) untuk perlindungan dan juga water levelling, supaya air hujan akan menghala ke tempat pembuangan air. T200 jenis exposed.

    • @admusosman6983
      @admusosman6983 3 года назад +2

      T kasih tuan. Saya sekarang dalam proses membuat kolam mandi.
      Selepas diplaster dinding dan rander lantai. Saya akan sapu T200 x 2 layer. Kemudian saya akan sapu lagi lapisan ketiga x 2 layer dgn semin waterproffing sika 107 sebelum kerja2 tiles ..soalan kedua saya. Bolehke.. Lapisan semin waterproffing sika boleh melekat pada lapisan T200.

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад +1

      @@admusosman6983 T200, lebih sesuai dalam keadaan exposed. Skip step this and apply T107 x 2.

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад

      Selepas T107, kena render sebelum letak tiles.

  • @rakyatmarhaen3889
    @rakyatmarhaen3889 3 года назад +1

    Can be used on the floor like epoxy paint

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад

      Not recommended. Not suitable for high traffic.

  • @navanithan516151
    @navanithan516151 2 года назад +1

    Hi sir
    I used t200h on my outdoors balcony few months ago..when i step outside my balcony i can fell sticking..
    Any solution for this please advise yeah

    • @ATKCeWarehouse
      @ATKCeWarehouse  2 года назад

      It should be dry just like a painted surface. Did you mix thoroughly before applying? And, how many layers did you apply?

    • @navanithan516151
      @navanithan516151 2 года назад +1

      @@ATKCeWarehouse my surface flat surface / lantai licin
      1. First layer t007
      2. Second layer t200h
      3 third layer t200h
      During rain time the floor not sticking i can walk like normal..during hot time or in the evening I cannot walk it’s sticking
      Are this because the outdoor t200h grey colour ?

    • @ATKCeWarehouse
      @ATKCeWarehouse  2 года назад +1

      @@navanithan516151 This shouldn't happen. Once dried, t200h will become an elastic membrane and should not be tacky. In this event, you may highlight this issue to Pentens (manufacturer).

  • @kumaranchandrasaigran149
    @kumaranchandrasaigran149 3 года назад +1

    Can I apply this and install tiles on top of it?

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад +1

      T200H is designed for exposed waterproofing. I would suggest first, using T-100 then cement render before applying tiles.

    • @kumaranchandrasaigran149
      @kumaranchandrasaigran149 3 года назад +1

      @@ATKCeWarehouse Thank you. 🙂👌

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад

      @@kumaranchandrasaigran149 Most welcome.

  • @mohdridzuanridzuan1178
    @mohdridzuanridzuan1178 3 года назад +1

    Hello.. T200h tu kn ltk air jgk ke?

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад

      Boleh dicairkan dengan air kerana water based.

  • @abeyus23
    @abeyus23 3 года назад +2

    for slab porch which 1 is better? t200 or t200H?

    • @allenperera6158
      @allenperera6158 3 года назад +1

      I think Pentens T-305 is better suited for you

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад +2

      Stay tuned this week, as I am going to release another video on T-200H; the advantages, application and comparisons with T-200. Thank you.

    • @abeyus23
      @abeyus23 3 года назад +1

      @@allenperera6158 tq. it better than t200?

    • @allenperera6158
      @allenperera6158 3 года назад +1

      @@abeyus23 For concrete that is always exposed to the weather, I think the T-305 is much cheaper and more durable; since it is basically cement mixed with acrylic.

  • @bazasnugroho4386
    @bazasnugroho4386 3 года назад +1

    waterbased or solvent based Sir?

  • @ilmarli6728
    @ilmarli6728 Год назад +1

    Mahu tanya lokasi kedai di mana

  • @yuyusnida
    @yuyusnida 2 года назад +1

    Apa beza Pentens T200 dengan T200-H?

  • @limdisc
    @limdisc 2 года назад +1

    Hi, I am planning to apply t200 to my roof slab, may I ask if I still need to apply primer to the roof slab which has been waterproofed by t200 previously (waterproof about 1 year ago) ?
    Or I can straightaway apply t200 without primer?

    • @ATKCeWarehouse
      @ATKCeWarehouse  2 года назад

      How is the surface at the moment? all good and T200 still intact? any sign of water leakages?

    • @limdisc
      @limdisc 2 года назад +1

      Just a few hairline cracks and t200 still well intact, no sign of water leakages.
      Planning to apply again for purely prevention purpose.. Do you think it is necessary?

    • @ATKCeWarehouse
      @ATKCeWarehouse  2 года назад +1

      @@limdisc You may.

  • @a.izzham510
    @a.izzham510 Год назад

    Can apply floor outdoor?

    • @ATKCeWarehouse
      @ATKCeWarehouse  Год назад

      Yes you can. but not recommended for heavy traffic.

  • @ayieeazri
    @ayieeazri 2 года назад +1

    Bos klau tiba2 kita tgh sapu.. tiba2 hujan trun rintik2 mcm mna bos.. boleh rosak x..

    • @ATKCeWarehouse
      @ATKCeWarehouse  2 года назад

      yeah, boleh rosak. Kena tengok cuaca jugak, kalau terlalu panas, tak rekomen jugak

    • @ayieeazri
      @ayieeazri 2 года назад +1

      @@ATKCeWarehouse sy bt petang.. tpi tgh ari tu memdung.. sja. Abis spu.. tiba rintik plk hujan. Tpi skjap..

    • @ATKCeWarehouse
      @ATKCeWarehouse  2 года назад +1

      @@ayieeazri Should be ok.

    • @ayieeazri
      @ayieeazri 2 года назад +1

      @@ATKCeWarehouse brpa tempoh msa untuk lapisan pertama kering.. kedua dan ketiga

    • @ATKCeWarehouse
      @ATKCeWarehouse  2 года назад +1

      @@ayieeazri lingkungan 1-2 jam for primer, 2-4 jam for finish coatings. Tapi tengok cuaca jugak. Boleh refer instruction kat produk.

  • @myns3206
    @myns3206 Год назад +1

    Untuk dinding lembab dan berkulat. Sesuai tak pakai ini

    • @ATKCeWarehouse
      @ATKCeWarehouse  Год назад

      Ah Gei suggest carikan punca kebocoran dulu. Fix from the source.

  • @kengseong
    @kengseong 3 года назад +1

    hi before i use this t-200h, what can i use seal the hairline cracks or holes?
    can i use the t-200h or t-007 or awning silicone caulk?

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад

      For fine hair lines, you may use t007, or even diluted t200h to fill up the cavities. However, for severe damages, you may need to do grouting repairs.

    • @ksyap2634
      @ksyap2634 3 года назад +1

      @@ATKCeWarehouse Thanks for your feedback. Do you have any recommendation for repairing long line cracks? Currently i'm using the Xtraseal Multipurpose Awning & Roofing Caulk (Green long bottle).
      What is your commend?
      Thanks a lot!

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад +1

      @@ksyap2634 If you are referring to repairing concrete surface crack lines, I don't recommend XTS Awning & Roofing Caulk. At least, not for long term solution.

    • @kengseong
      @kengseong 3 года назад +1

      @@ATKCeWarehouse thanks
      shall use t-007 to fill up the cracks
      thanks

    • @ATKCeWarehouse
      @ATKCeWarehouse  3 года назад

      @@kengseong T-007 only able to bridge up fine hair lines.