Rather than removing the bleeder screw and having to collect fluids, etc, I've found that if you remove the lid from the brake reservoir bottle in the engine bay, you don't need trouble yourself with undoing loads of other stuff and having to bleed the brakes. You've removed the 'pressure lid' so pushing the piston in can be done with your fingers. Thought it might be of use. Cheers 🙄👍🏻
very nice buddy.my pads squeaked. i made prtial bleed,but finally i made exactly how i must bleed. and today my pads are ok. today i understood how important is the liquid to be new and the bleed right. the liquid must be new,'cos it helps the pads to return and make a gap, so they dosn't touch,squeaks in the disk.thanx.
+Barbara Martinez We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
My favorite person from 1A auto! Very easy to understand and entertaining.
I must say it was a good clean on that bearing ;)
Yeah more like a new one.
Rather than removing the bleeder screw and having to collect fluids, etc, I've found that if you remove the lid from the brake reservoir bottle in the engine bay, you don't need trouble yourself with undoing loads of other stuff and having to bleed the brakes. You've removed the 'pressure lid' so pushing the piston in can be done with your fingers. Thought it might be of use.
Cheers 🙄👍🏻
I always clean and re-grease the caliper pins. Great video. Thank you.
Okay I just needed to know how to change my front brakes on a 2004 for focus but I guess I learned more
very nice buddy.my pads squeaked. i made prtial bleed,but finally i made exactly how i must bleed. and today my pads are ok. today i understood how important is the liquid to be new and the bleed right. the liquid must be new,'cos it helps the pads to return and make a gap, so they dosn't touch,squeaks in the disk.thanx.
who else went to the comments to see who commented about how the bearing became brand new quality just by using a small wire brush😂
Is it the same with a 2007 ford focus? I'm working on my daughter's today
+Barbara Martinez We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
SO, was that a Harbor Freight wire brush orrrr?
Where do I get that copper antiseize spray?
+Richard D Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
thx, wished had as kid
Thanks
you guys are really helpful! I've got to do the same today at the shop! thanks a bunch!
+Hagane Yoshi Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
My Ford Focus brake stick won't go down inside the car?
I’m hoping that happens to my car when I do this job…
Verichle