Dude this is exactly what i was looking for. I am teaching myself to code and doing the sat retro. No one touches my cars but me, from the engine swap, to valve seals, I do it all. Except Tires, i dont have a machine or balancer 😂
Hi BMW DIY, hoping you can assist me, i swapped my broken transmission for a used one and now i need to program the VIN to the EGS module of the donor tranmission. Are you able to assist me or tell me if the steps are similar to that of this video?
Hi I added the sport button to my 2006 530Xi ,I get sport on the dashboard and the steering gets tight . But can I add the DS shifting ? If I put it to the side DS my dashboard doesn’t switch si,s2..will this do that ? I have CCC . Also can I doit on my 2009 X5 with ccc? Thanks
Hey, i don't know if you'll answer after this long but i'll try anyways. I'm trying to retrofit paddles on my '08 530, but i can't rly figure it out how to code them, i don't have the 2tb but i understood that i need to activate it to be able to use the paddles. Do you by any chances could tell me how i should do it? I don't know how to code them with NCS Expert. Thank you!
Hi i have a 2008 535xi im trying turn off the tpms light but no have the DSC module on ncs expert this have another name? I had 335i and this called DSC
Hi thanks for video. I am a bit new but when when you say process ecu does it mean I just click process or I need to click to execute job. Also when I try to use winkfp it gives errors that some items are not found any advice?
Hi there Bought F1 steering wheel and sport automatic derailleur for 2009 bmw E60 520 d how should the wiring be for paddle shift derailleur works normally, sport button is active my questions how should the wiring be for the steering wheel derailleur and can the 2Tb change be made in my vehicle? There are those who write that it is not possible because the motor does not support the 520 d moles. Can anyone help with knowledge on the subject?
Thanks this helped I only did the ncs was expert part as I run xHP software on my box and that’s made for sat gear selector. Sport button worked . Steer goes stiffer and better throttle response
@@saifiqbal2587 Do you have 530 or 535? Bhai please respond to this message. And did you add the $2TB option in kombi aswell? Does it display SPORT in cluster? If you have xhp you dont need to flash it with winkfp. It wont allow you to flash if you have xhp. You have to uninstall the xhp then you can flash it. But no reason for doing that.
@@MURILOROSENDO Noo, if you have xhp in you gearbox. You cant flash it. It locks the eeprom. The only thing you can do is to add the option. NOT Flash.
hi guys i have problem loading the daten files, i downloaded the daten files from the link that was in description and followed the instructions step by step and always get the same error. Looks like i cant find the daten file in the e60 folder though the bmw cooding tool. Any solution for this problem? thanks
@@707stonks6 the steps are 1-Start WinKFP 2-Select F1(Comfort Mode) 3-Select F3(Update ZUSB) 4-Find and select the ECU that you wish to update/update 5-Select F3(enter vin) 6-Type in car Vin 7-Select OK 8-Select F8(Done) 9-Select F3(Prog.ZB-update) 10-Confirm.
Hi I would like a steering wheel with peddle shifte but I do not have a sport transmission but a normal automatic joystick is that possible? King regards
You need to upgrade to the sport transmission and ECU in order for the paddle shifter steering wheel to work. The sport shifter and ECU is the more important and less expensive part. You can always get the paddle shifter steering wheel after.
Too many things done nessery. You flash egs vith winkfp first vith zuzb number provided the you alter fa and write fa to lm and cas and code egs, kombi kbm kgm ant that shuld do.
Its the ZUSB number that was coded to E60s that came with the Sport Automatic Transmission from factory. You can only retrofit this shifter if your E60 is LCI and automatic.
@@bmwdiy My question was about the zusb number. I already have lci 530d. I have seen one topic where the person write zusb number as 7592130 at the same 530d. Your number started with 760... . My question is : Are these numbers different for different engines ?
@@leonkann Yes zusb is different if by engine and transmision. BMW DIY 535i have, 6hp21 transmision, your 530d have 6hp28. So your stock software ZUSB is 7592132, 530d sport transmission software ZUSB is 7592130.
@@andriusskaudzius2424 i flashed egs but didnt get faster shifts. In DS mone it shows s1,s2 etc but faster shifts are only with sport button activated? Do you know?
When you remove the $205 and add the $2TB in VO, how come it still says you have $205 and u have the sat gear selector installed. Even you said i wont need to do it because i have already done it... are you sure? In video says $205.
Great question! When I clicked START, CHASSIS, E60, and then CAS in the video, I had not added $2TB to the CAS module yet since I did not know it was necessary. I had only added it to the KOMBI which is what shows you the "SPORT" in the gauge cluster. I guess I could have clicked OK after adding $2TB in the CAS and then it would show it in the list along with the other options, but the proof is I have "SPORT" in the gauge cluster now and I didn't have it before. Also, I notice a big difference when pressing the SPORT button or shifting the gear shifter to the side. It is like a big boost in torque which is great if you want to pass someone really quick and I did not have that before. I found out after that you have to add $2TB to the VO for the CAS, KOMBI, and also the EGS module so you don't get any SOS Malfunction error in the IDrive.
@@bmwdiy Aha! I did this retrofit in my 525d and was working perfect without coding. After i coded it... it was acting abnormal and had sos warning etc. So after 4 days.. i got an proper answer. If you have 520 525 DONT CODE IT. If you code it in kombi you will have issues. Because the gearbox does not support it on 520 and 525. In 530 and 535 it was optional so there you should code.
Hello. I have installed the sat joystick. And a steering wheel with paddles. How can i coding the paddles? And need i 2 cables for the paddles ? Thank you
Dude this is exactly what i was looking for. I am teaching myself to code and doing the sat retro. No one touches my cars but me, from the engine swap, to valve seals, I do it all. Except Tires, i dont have a machine or balancer 😂
My friend do you know how to retrofit the steering wheel with the paddle shift? On the e60 as well
Hi BMW DIY, hoping you can assist me, i swapped my broken transmission for a used one and now i need to program the VIN to the EGS module of the donor tranmission. Are you able to assist me or tell me if the steps are similar to that of this video?
Shit bro i've been looking up for this info for a long time. Big thank you and keep uploading such interesting stuff!!!!
Hello is this new selector and then the coding you have done changed the shifts quicker
Hi I added the sport button to my 2006 530Xi ,I get sport on the dashboard and the steering gets tight . But can I add the DS shifting ? If I put it to the side DS my dashboard doesn’t switch si,s2..will this do that ? I have CCC . Also can I doit on my 2009 X5 with ccc?
Thanks
Hey, i don't know if you'll answer after this long but i'll try anyways. I'm trying to retrofit paddles on my '08 530, but i can't rly figure it out how to code them, i don't have the 2tb but i understood that i need to activate it to be able to use the paddles. Do you by any chances could tell me how i should do it? I don't know how to code them with NCS Expert. Thank you!
Will the shifter work with no coding? I just installed the sport shifter, but it's stuck in park. I can NOT drive the car...PLEASE HELP!
Hi i have a 2008 535xi im trying turn off the tpms light but no have the DSC module on ncs expert this have another name? I had 335i and this called DSC
Can i do this with an E90 335D? It has the 6HP28 transmission
This is only for the E60
What do you know about getting inpa to work and read the car? Ista work fine and the cable seems to be setup fine
Yo, will this help with anything on a 520D? Got the SAT shifter, because I prefer the look of it. Thanks
Hi thanks for video. I am a bit new but when when you say process ecu does it mean I just click process or I need to click to execute job. Also when I try to use winkfp it gives errors that some items are not found any advice?
You have to click Execute Job. You might need to update the daten files for the E60, you can get them here www.bimmergeeks.net/downloads
Hi there
Bought F1 steering wheel and sport automatic derailleur for 2009 bmw E60 520 d
how should the wiring be for paddle shift
derailleur works normally, sport button is active
my questions
how should the wiring be for the steering wheel derailleur
and can the 2Tb change be made in my vehicle?
There are those who write that it is not possible because the motor does not support the 520 d moles.
Can anyone help with knowledge on the subject?
Is it possible to fit the SAT on 520d?
Is it possible to do the SAT retrofit for e60 2009 LCI 520i also ? Or it’s not suitable for this type of engine (N43 )
Let me please know
Thanks this helped I only did the ncs was expert part as I run xHP software on my box and that’s made for sat gear selector. Sport button worked . Steer goes stiffer and better throttle response
@@MURILOROSENDO no as I didn't run the flash. I only added the option code
@@saifiqbal2587 Do you have 530 or 535? Bhai please respond to this message.
And did you add the $2TB option in kombi aswell? Does it display SPORT in cluster?
If you have xhp you dont need to flash it with winkfp. It wont allow you to flash if you have xhp. You have to uninstall the xhp then you can flash it. But no reason for doing that.
@@MURILOROSENDO Noo, if you have xhp in you gearbox. You cant flash it. It locks the eeprom. The only thing you can do is to add the option. NOT Flash.
@@Saqib.S i had a 535
@@Saqib.S i only added it to the vo i didnt do the flash anyway
hi guys
i have problem loading the daten files, i downloaded the daten files from the link that was in description and followed the instructions step by step and always get the same error. Looks like i cant find the daten file in the e60 folder though the bmw cooding tool. Any solution for this problem?
thanks
i just did a trans swap on my e92 how do i code it ? everything work fine i just have no sport mode (DS mode) help pls
Did u ever fix i have same problem rn
@@707stonks6 you have to code the vin number on the new swapped trans with WinKFP
@@707stonks6 the steps are
1-Start WinKFP
2-Select F1(Comfort Mode)
3-Select F3(Update ZUSB)
4-Find and select the ECU that you wish to update/update
5-Select F3(enter vin)
6-Type in car Vin
7-Select OK
8-Select F8(Done)
9-Select F3(Prog.ZB-update)
10-Confirm.
Thanks for that im going to try this right now i have a code that says its having communication issues and the car stays on 3rd gear
@@707stonks6 check if the harness as well seated on the trans
You don't need coding for the sports button. Just short the pin 8 and 10 behind DSC module
I had to code mine. Lci 535
Hi I would like a steering wheel with peddle shifte but I do not have a sport transmission but a normal automatic joystick is that possible?
King regards
You need to upgrade to the sport transmission and ECU in order for the paddle shifter steering wheel to work. The sport shifter and ECU is the more important and less expensive part. You can always get the paddle shifter steering wheel after.
BMW DIY Hello can you send me the backup of your car the trc file. Ugurkonak54@hotmail.com
King regards
Too many things done nessery. You flash egs vith winkfp first vith zuzb number provided the you alter fa and write fa to lm and cas and code egs, kombi kbm kgm ant that shuld do.
Where did you find ZUSB number ? Is it different for any modifications ? i have 530d , where to find correct one ?
Its the ZUSB number that was coded to E60s that came with the Sport Automatic Transmission from factory. You can only retrofit this shifter if your E60 is LCI and automatic.
@@bmwdiy My question was about the zusb number. I already have lci 530d. I have seen one topic where the person write zusb number as 7592130 at the same 530d. Your number started with 760... . My question is : Are these numbers different for different engines ?
@@bmwdiy Okay I found answer. Answer down here:
with GKE195:
EA51;7592150 Coupe 650I TUE1 //EUR LL 09/07 - 12/10 //270KW
EA51;7592154 Coupe 650I TUE1 //EUR LL 09/07 - 12/10 //270KW (ohne ALPINA Brief)
EA52;7592150 Coupe 650I TUE1 //EUR RL 09/07 - 12/10 //270KW
EA52;7592154 Coupe 650I TUE1 //EUR RL 09/07 - 12/10 //270KW (ohne ALPINA Brief)
EA53;7592152 Coupe 650I TUE1 //US LL 09/07 - 12/10 //270KW
EA71;7592148 Coupe 635d T2 //EUR LL 09/07 - 12/10 /210KW M57Y
EA72;7592148 Coupe 635d T2 //EUR RL 09/07 - 12/10 /210KW M57Y
EB51;7592150 Cabrio 650I TUE1//EUR LL 09/07 - 01/11 //270KW (Korea)
EB51;7592152 Cabrio 650I TUE1//EUR LL 09/07 - 01/11 //270KW
EB51;7592154 Cabrio 650I TUE1//EUR LL 09/07 - 01/11 //270KW (ohne ALPINA Brief)
EB52;7592150 Cabrio 650I TUE1//EUR RL 09/07 - 01/11 //270KW
EB52;7592154 Cabrio 650I TUE1//EUR RL 09/07 - 01/11 //270KW (ohne ALPINA Brief)
EB53;7592152 Cabrio 650I TUE1//US LL 09/07 - 01/11 //270KW
EB71;7592148 Cabrio 635D M57y LL 09/07 - 01/11 //210KW
EB72;7592148 Cabrio 635D M57y RL 09/07 - 01/11 //210KW
NW51;7592140 Limousine 550i TU//EUR LL 03/07 - 12/09 /270kW
NW51;7592142 Limousine 550i TU//EUR LL 03/07 - 12/09 /270kW (Korea)
NW51;7592154 Limousine 550i TU//EUR LL 03/07 - 12/09 /270kW (ohne ALPINA Brief)
NW52;7592140 Limousine 550i TU//EUR RL 03/07 - 12/09 /270kW
NW52;7592154 Limousine 550i TU//EUR RL 03/07 - 12/09 /270kW (ohne ALPINA Brief)
NW53;7592142 Limousine 550i TU//US LL 03/07 - 12/09 /270kW
NX71;7592130 Limousine 530d TUE2//EUR LL 03/07 - 12/09 /170KW
NX72;7592130 Limousine 530d TUE2//EUR RL 03/07 - 12/09 /170KW
NX75;7592130 Limousine 530d TUE2//EUR INDIEN RL 03/08 - 03/10 /170KW
NX91;7592134 Limousine 535d M57Y//EUR LL 03/07 - 12/09 /210KW M57Y
NX92;7592134 Limousine 535d M57Y//EUR RL 03/07 - 12/09 /210KW M57Y
PW51;7592140 Touring 550i TU //EUR LL 03/07 - 07/10 //270kW
PW51;7592154 Touring 550i TU //EUR LL 03/07 - 07/10 //270kW (ohne ALPINA Brief)
PW52;7592140 Touring 550i TU //EUR RL 03/07 - 07/10 //270kW
PW52;7592154 Touring 550i TU //EUR RL 03/07 - 07/10 //270kW (ohne ALPINA Brief)
PX71;7592130 Touring 530d TUE2 //EUR LL 03/07 - 07/10 /170KW
PX72;7592130 Touring 530d TUE2//EUR RL 03/07 - 07/10 /170KW
PX91;7592134 Touring 535D //EUR LL 03/07 - 07/10 /210kW M57Y
PX92;7592134 Touring 535D //EUR RL 03/07 - 07/10 /210kW M57Y
with GKE215:
EA11;7603586 Coupe 630I //EUR LL 09/07 - 12/10 //200KW N52K
EA12;7603586 Coupe 630I //EUR RL 09/07 - 12/10 //200KW N52K
EA31;7592128 Coupe 630I //EUR LL 09/07 - 12/10 //200kW
EA32;7592128 Coupe 630I //EUR RL 09/07 - 12/10 //200kW
EB11;7603586 Cabrio 630I //EUR LL 09/07 - 01/11 //200kW N52K
EB12;7603586 Cabrio 630I //EUR RL 09/07 - 01/11 //200kW N52K
EB31;7592128 Cabrio 630I //EUR LL 09/07 - 01/11 //200kW
EB32;7592128 Cabrio 630I //EUR RL 09/07 - 01/11 //200kW
ND71;7592116 Limousine 530i //EUR LL 03/07 - 06/10 /200kW
ND72;7592116 Limousine 530i //EUR RL 03/07 - 06/10 /200kW
ND75;7603582 Limousine 530i //INDIEN RL 05/07 - 12/09 //200kW N52K
NK71;7592116 Touring 530i //EUR LL 03/07 - 03/11 //200KW
NK72;7592116 Touring 530i //EUR RL 03/07 - 03/11 //200KW
NU91;7603582 Limousine 530i //EUR LL 03/07 - 12/09 /200kW N52K
NU92;7603582 Limousine 530i //EUR RL 03/07 - 12/09 /200kW N52K
NU94;7603582 Limousine 530i OL //Malaysia RL 03/07 - 03/10 /200KW
NU95;7603582 Limousine 530i OL //RUSSLAND LL 03/07 - 02/10 /200KW N52K
NU96;7603582 Limousine 530i OL //AEGYPTEN LL 03/07 - 03/10 /200KW N52K
NU97;7603582 Limousine 530i OL //Indonesien RL 03/07 - 03/10 /200KW N52K
NW13;7601458 Limousine 535i //US LL 03/07 - 12/09 /225kW
PU91;7603582 Touring 530i OL //EUR LL 03/07 - 07/10 //200kW N52K
PU92;7603582 Touring 530i OL //EUR RL 03/07 - 07/10 //200kW N52K
Maybe someone wants to know this info ! ZUSB numbers are different for different engines !
@@leonkann Yes zusb is different if by engine and transmision. BMW DIY 535i have, 6hp21 transmision, your 530d have 6hp28. So your stock software ZUSB is 7592132, 530d sport transmission software ZUSB is 7592130.
@@andriusskaudzius2424 i flashed egs but didnt get faster shifts. In DS mone it shows s1,s2 etc but faster shifts are only with sport button activated? Do you know?
Can i Do this without a Sport Shifter? So i connect a Sport button to it? Is it still the Same ?
Yes you can
Nice DIY!
Have you made one about HUD Retrofit?
Thanks, the HUD was a factory option
Will this work on a 2008 e61 535xi?
Yes, any LCI E60 that came with the normal automatic transmission
When you remove the $205 and add the $2TB in VO, how come it still says you have $205 and u have the sat gear selector installed. Even you said i wont need to do it because i have already done it... are you sure? In video says $205.
Great question! When I clicked START, CHASSIS, E60, and then CAS in the video, I had not added $2TB to the CAS module yet since I did not know it was necessary. I had only added it to the KOMBI which is what shows you the "SPORT" in the gauge cluster. I guess I could have clicked OK after adding $2TB in the CAS and then it would show it in the list along with the other options, but the proof is I have "SPORT" in the gauge cluster now and I didn't have it before. Also, I notice a big difference when pressing the SPORT button or shifting the gear shifter to the side. It is like a big boost in torque which is great if you want to pass someone really quick and I did not have that before. I found out after that you have to add $2TB to the VO for the CAS, KOMBI, and also the EGS module so you don't get any SOS Malfunction error in the IDrive.
@@bmwdiy Aha!
I did this retrofit in my 525d and was working perfect without coding. After i coded it... it was acting abnormal and had sos warning etc. So after 4 days.. i got an proper answer.
If you have 520 525 DONT CODE IT. If you code it in kombi you will have issues. Because the gearbox does not support it on 520 and 525.
In 530 and 535 it was optional so there you should code.
I need help with this. Do you ever come down to seattle?
I think the border is still closed, which part do you need help with?
Is this gearbox reliable?
Yes, I’ve had it for over a year with no problems
Hello.
I have installed the sat joystick.
And a steering wheel with paddles.
How can i coding the paddles?
And need i 2 cables for the paddles ?
Thank you
Can I change it on my e61 facelift ?
Yes, as long as you had the normal automatic shifter before
This is my shifter.
It is possible?
Hmm can’t upload the pic
Bro, you sound so confusing to me. And that freaking sound in the background, camera travel....Thank you for the effort but not for me.