I’ve Been following your content since the begging of this build and every time I get the notification a new vid dropped, its honestly like crack. Cannot wait to see it all done!
I stumbled on this channel from watching the BMW e90 videos. I've never been into Honda's (for the FWD layout) but I respect a good engine build video and an overall quality build. Also I respect that these Honda engines were always so bulletproof. I appreciate that you don't aim for the loud fart can exhaust sounds. And your build is really clean! Not like the typical Honda's you see around town that have been beaten into oblivion, understeered into curb's, have mix matched body kit pieces from the junkyard, and the loudest fart can imaginable. Keep it up!
10:06 I felt that my man. I question my logic sometimes when I'm doing something that's 1000x harder by myself to only realize the 10mm I took off is on the other side...
I don’t follow any one on you tube but yo, I can watch this video all day long. About half way saved up for my build. Perfect video though ! Couldn’t ask for more
Man bro you've come a long way! She's going to be worth all the Blood,sweat and maybe tears! Great job bud. Wish i had your help on my Project Y49 Crx Si
Bro....🤣🤣 at 10:08 you start trying to shove the trans on with the motor swaying, I about spit everywhere laughing. Absolutely great video by the way! The little things are big. Really like the mic setup during install 👌
Mans rebuilt this without a fancy or expensive ratchet and tools. Just proves house easy Honda’s are to work with not like euros were you need special torx sockets and pliers for all the coolant lines good job
It’s always better to put oil inside the oil pump before assembly. The reason is because once you start the engine, the oil pump isn’t going to be lubricated and will run dry.
You should get an inch pound wrench with a dial, it’s super super useful when doing the stuff under 20ft lbs and a lot more accurate at those smaller specs
did you opt for boost by gear as well? I finished my turbo GSR build a little over a month ago (420whp 310wtq mustang dyno), but boost by gear was probably the best thing I invested in for the build, otherwise 1-3 are mostly useless at full power, if you didnt and that what you're experiencing now I'd highly recommend. loving the build! good to see someone else doing it 100% right
Hi John, I'm a 19yr old college student planning to do a nice street build this summer, not sure whether I'm going for a EK coupe or a 240sx yet, but I was helping a friend assemble his SR20 for his 240 over spring break, and we used similar masking tape to cover the block until we got the head installed. Did you have any problems with tape residue left behind? What did you do to get rid of it? (or maybe I'm using the wrong tape) Thank you man you are an inspiration!
Who’s ready for the dyno numbers on Friday?! Leave your guesses below!
4011
@@Fadedmane1 nice try lol
420HP!?
368
@@boosted_john no it has to be either 300hp or 354hp
Did this man just make an ASMR video of an engine being assembled? lol
skrt
Bro good you how much do motor and parts got 1 like one do motor whatt auto parts thing good buy it thank bro video
Only asmr I’ll hear
@@sebastianortiz235 como ??
It was lovely 🥴🥺
Birds chirping and engine building noises has a very calming effect to this video.
I really really love how their is no annoying background music 😎!
A Taylor, yes correct.
They’re*
YES! the sound of the rachets and his reaction is great! lol
Crazy how simple yet powerful these engines can be, this was awesome!
love how u did this single handedly and made it satisfying
Engine building ASMR 😍😍
Don’t tell them lol 😎
I’ve Been following your content since the begging of this build and every time I get the notification a new vid dropped, its honestly like crack. Cannot wait to see it all done!
love the fact that he includes all of the relatable mess ups
yes, good.
I stumbled on this channel from watching the BMW e90 videos. I've never been into Honda's (for the FWD layout) but I respect a good engine build video and an overall quality build. Also I respect that these Honda engines were always so bulletproof. I appreciate that you don't aim for the loud fart can exhaust sounds. And your build is really clean! Not like the typical Honda's you see around town that have been beaten into oblivion, understeered into curb's, have mix matched body kit pieces from the junkyard, and the loudest fart can imaginable. Keep it up!
10:06 I felt that my man. I question my logic sometimes when I'm doing something that's 1000x harder by myself to only realize the 10mm I took off is on the other side...
7:56 I would've done the same. Step back..."ooh that's lookin slick 👌"
Its nice how you build it in your garage with no expensive tools or equipment:D
5:04 that was a big balls move for ordering off ebay
That was surprisingly therapeutic
Glad to see u build engine at home.
Brooo your girl is a rider helping you build cars and support you never leave her lol
Gotta love videos without stupid hey guys today we are building etc...straight to business without any words, respect!
Stoked for you man!
Oh this is beautiful right here
Why is this so satisfying and relaxing to watch
Finally buddy...all are coming together!!! I'm happy for you!!!
Dammm my prayers go out to that motor assembly
Amen
This is art
maybe i dislike the black parts being black, why not red or silver? i hate black.
I just bought a Honda myself, watching this channel may or may not have been a deciding factor on that purchase
Swag 😎
Why was this so satisfying to watch wtffff
That was the most enjoyable 11 minutes of my life, watching that engine being assembled was like music to my ears, without the music... keep it up....
That’s awesome feedback!
It was a good watch
@@boosted_john nice clean build brother want to join in one day soon n build my own motor
Bro i felt that "lower back left chat"
Lol
@@boosted_john i laught so hard , ahahahah i always do the same
@@Stevie_O_Man i guess she did not want to help him, unless a "shaft was being put into a hole".
Like a present for Christmas
This is some asmr I could get into already rewatched it twice now
😎
@@boosted_john can't wait to see it build some powaaa
this is the reality version of my summer car. Satana~ good job guy
Watched all the way thru just to realize this was 2 years ago 🦾😤 this a hard video💯
The second I saw hondabond I knew I was watching a good video
Underrated comment
Oh I'm back!, and how I've missed you
Nice to see that the Civic got the engine and everything in!! Can't wait to see what happens next! Keep it up!! 🙌🙌
I see John kinda strong💪🏻
I don’t follow any one on you tube but yo, I can watch this video all day long. About half way saved up for my build. Perfect video though ! Couldn’t ask for more
Thank you. I’m very happy with how this video turned out.
You think these built engines are reliable enough to run as a daily?
Awesome video 👏
Bro this is amazing lighting!!
Thank you. Was get time pleasure.
Not a VTEC kind of guy, but love the asmr build 👁️👄👁️
Man bro you've come a long way! She's going to be worth all the Blood,sweat and maybe tears! Great job bud. Wish i had your help on my Project Y49 Crx Si
Thank you!
Beautiful 💯👌
Muy bueno... Hasta la ayudante esta buena 😊😍
I could feel my lower back pain coming back when u started reaching for that transmission bolt lol, just did a clutch job few weeks back.
Daym it doesnt get anymore legit than this👍💯
Bro....🤣🤣 at 10:08 you start trying to shove the trans on with the motor swaying, I about spit everywhere laughing. Absolutely great video by the way! The little things are big. Really like the mic setup during install 👌
10:01 oh he gave it da BUSINESS
Lolol
Good job bro👍👍
Respect on that wow
falling asleep in the bride seat on the ground while your dad builds a car ASMR
lol
Lovely build !
Good shit bro.
Now that is what I call "Respecting the Build"
Always a couple hiccups or drawbacks but
Got my Respect
Thank you! Did you like to raw audio format?
Really nice recorder
This was god 4 my OCD man. Rite on✌
Dude a LS with some vtec sauce. I didnt even know this was an option😍👍
Jam 🤙🏼
You must be a moron. LS vtec swaps have been going on for over 15yrs
we want more videos like this
Mans rebuilt this without a fancy or expensive ratchet and tools. Just proves house easy Honda’s are to work with not like euros were you need special torx sockets and pliers for all the coolant lines good job
Man keep making videos like this please
The day we’ve been waiting for
Me too. Trust me :)
Bro I'm so jealous lmao, I hope one day I can build my dream car
this guy needs more views!
Wow nice job .
RUclips Algorithm at its finest 🔥🔥🔥🔥🔥
Ayo!! ❣️BIG MOVES!! 🏎💨
Ayo swag
Vetc sol. Broken….
Hope it does good with that xtd clutch mine started to slip at 270hp range have to change it and retune
Interesting 🧐
That side show Bob laugh was evil
You should really think of investing in a rubber mallet that hurt my eyes😭😂 All love tho💯🤣🤣
Loved the ending. Congrats! Xoxo 🤗
Haha thanks mom!
This is like ASMR, it's incredibly relaxing. Fucking love it.
This is fire
Good information
This was very satisfying
Awsome video!!
Love it so mutch....
Super nice engine smashed oil pan
I changed the oil pan to a moroso shortly after.
"oh I put the bolts so far away" that's something I would do lmfao
What timing belt did you use for lsv tech
You have the gift son
So I’m guessing you didn’t get to film the assembly? Or where is that video at? The disassembly was sooooo satisfying
What are you saying bro? You literally commented on the assembly video.
Dude i need more asmr engine builds
Excellent mate !
Let’s goooo finally get to see this thing going!
It’s always better to put oil inside the oil pump before assembly. The reason is because once you start the engine, the oil pump isn’t going to be lubricated and will run dry.
Interesting. That’s something I never thought to do. Thanks!
You should get an inch pound wrench with a dial, it’s super super useful when doing the stuff under 20ft lbs and a lot more accurate at those smaller specs
I’m going to get one today probably.
Boosted John heck yeah
did you opt for boost by gear as well? I finished my turbo GSR build a little over a month ago (420whp 310wtq mustang dyno), but boost by gear was probably the best thing I invested in for the build, otherwise 1-3 are mostly useless at full power, if you didnt and that what you're experiencing now I'd highly recommend. loving the build! good to see someone else doing it 100% right
this is soo well made... you are very talented!! i love your videos
Awesome man, really awesome. I fucking love it. enjoy too much...
Friend : what kinda p0rn did you watch ?
Me : it's complicated
Extremely underrated channel, keep up the amazing work man👍
Did you put sealant on the end caps
so beautiful
your vids are like asmr nice
Are you still going to run ebay turbo?
Gunna have to wait and find out :)
When that bolt went under. I think we all felt that one.
😩😩😩 so gooooooood
"Extremely Satisfying"... Accurate.
Hi John, I'm a 19yr old college student planning to do a nice street build this summer, not sure whether I'm going for a EK coupe or a 240sx yet, but I was helping a friend assemble his SR20 for his 240 over spring break, and we used similar masking tape to cover the block until we got the head installed. Did you have any problems with tape residue left behind? What did you do to get rid of it? (or maybe I'm using the wrong tape) Thank you man you are an inspiration!
when did he put in the piston?🙂
Ohhhh that first start after ASMR'ing to an engine assembly was somthing intense! Holy shit it sounded good. On my way nw to hunt down that dyno vid.