Jc really need to sort out their counterfeiting error detection software because it end up ruining their reputation eventually. Great video as always jesse. Really enjoyed watching.
Great Video of Nanosurgery. I did several microsurgical operations but what you share with us hier is really an Art and a great Demostration of high quality job. Thank you my friend for this wonderfull video.
Could you do an in-depth video regarding spot welding iPhone batteries for battery replacement without the warning messages and explain about tag on flex's etc?
Great video Jessie. I had truedepth prompt after repair the prompt disappeared. Dot projector gets pass when tested but doesnt light up when trying to use it. Also portrait mode gets move further away prompt. Do you think this chip method could fix the issue?
Jesse Could you do a video on dot projector repair on iPad Pro 3 have i2c box and replacement flex ? How to remove from metal bracket unlike iPhone cases ?
Hey Jesse, great video. I downloaded JCID as I watched (I'm pretty new to in-depth repairs) and my working iPhone 14 and iPhone 11 pro aren't being detected by the software (Windows recognizes both devices). Any ideas why? Thanks, Lewis.
Jesse, thank you so much! You confirmed my suggestion about flashing with detached iR-camera. I had the same issue when was playing with nand. I have a couple questions: 1. Can you please do the video about case of lost original data of Dot Projector. What if this JC chip goes bad, what then? You won't be able to read data. 2. Does orginal Dot flex cable (just the cable without dot module) contain any data? I have an iPhone with torn Dot flex and I just want to transfer Dot module to new OEM flex. Will it work? 3. Could you make a video about restore TrueTone and Face ID without original screen/reciever flex. JC has special receiver flexes. As I know you'll need to desolder nand and do parts unbind with P13. Would be great if you show the process. Thank you!
1. Yes you can recover it by unbind through NAND 2. The OEM flex contains nothing 3. I have it recorded already. Just need to edit and will post soon ☺️
Hi boss, I have a question, my phone has the truedepth camera error, so from watching this video I test my phone with the jc software and my distsens and ambient light can’t be read so I checked my earpiece speaker and realized the flex was damaged, I fixed it with jumper wire and I’m pretty sure it’s intact, I put it back in my phone, it still can’t be read, I tried updating, it still won’t show up, Do I need to restore to make it work?
So on Jc repair assistant if the IR camera is reading but giving me 00000000000000, does that mean it’s my IR camera is messed up and not allowing Face ID?
I didnt mean to sound like that, I only was asking if there was a difference between a tech and a doctor, like maybe more school or something. @@VCCBoardRepairs
When I tried the method in this video, the IIC malfunctioned as well. Since I did not have a spare chip, I replaced it with a JC-Flex cable and it did not work correctly. Is this due to the fact that I replaced the cable? Is there a solution to this problem? Also, why can't I copy the data from the original flex cable?
If you read the original data before messing with it, then you can just write the data to the new JC flex and everything should work. It's not the flex you're originally reading data from. It's the sensor The JC flex has a new IC that you're programming
Hello brother. I Have IPad 8th generation. I Play PUBG mobile Everyday but I am facing the problem with iPad touch. I couldn’t use thumb gloves, it’s not working, plz tell me the solution. Thanks
face unlock is not working, send it for repair, and as per the repair person they checked it by connecting to a programmer to fix it but programmer is not able to recognize the true depth camera@@VCCBoardRepairs
Jc really need to sort out their counterfeiting error detection software because it end up ruining their reputation eventually. Great video as always jesse. Really enjoyed watching.
DistSens is the (proximity sensor) you got them mixed but great videos man!
Ah, that makes sense.
Great Video of Nanosurgery. I did several microsurgical operations but what you share with us hier is really an Art and a great Demostration of high quality job. Thank you my friend for this wonderfull video.
Wow, amazing skills as a neurosurgeon
GREAT JOB BRO.....I WILL LOVE TO REGISTER FOR YOUR 90 DAYS COURES
Great work. Can you just read data without connecting the phone and directly write data?
Could you do an in-depth video regarding spot welding iPhone batteries for battery replacement without the warning messages and explain about tag on flex's etc?
love your vids man. Never stop doing videos.
Its too detail video, thank dude you are the best repair man
I appreciate that!
hi jesse, is there a way to repair the face id without the original flex or is it a lost cause?
You need the original front camera unit, specifically the dot projector and the infrared camera.
Nice content Jesse but was wondering if you can still use the JC Pro with this method?
Is the phone directly connected to the computer and can be read by the software or does it need to be plugged into a JC board first?
Yes direct connection works.
Do jc have a method to make a changed iPhone motherboard compatible with the original Face ID?
Great video Jessie. I had truedepth prompt after repair the prompt disappeared. Dot projector gets pass when tested but doesnt light up when trying to use it. Also portrait mode gets move further away prompt. Do you think this chip method could fix the issue?
Thanks for sharing idol Jesse, dont forget your gift to me this Christmas 😮❤ : )
Jesse
Could you do a video on dot projector repair on iPad Pro 3 have i2c box and replacement flex ?
How to remove from metal bracket unlike iPhone cases ?
You have to pop the sensor out of the metal housing through the side. You don't cut any shields.
@@VCCBoardRepairs thanks I’ll have a look do you use heat ,don’t want to damage it !
Yes I do. I recommend you practice on it
Jesse your videos are excellent and very clear thanks again !
Very helpful video
JCID multifunctional programmer for iPhone screen true tone, Face ID, battery, receiver FPC flex cable vibration data read write repair, DFU purple screen mode, ect.
nice vid, but can i repair it if my jcid says "fuses,replace ic" and i cant read the numbers but its not ripped or anything?
iPhone 11 Face ID
Reading time Chip damage or iic breakage
Iic chip abnormal
Anything solution
Hey Jesse, great video. I downloaded JCID as I watched (I'm pretty new to in-depth repairs) and my working iPhone 14 and iPhone 11 pro aren't being detected by the software (Windows recognizes both devices). Any ideas why? Thanks, Lewis.
ask JCID
Thank you!
before this i backup face id data...can i use my data face id on new redot projector ?
Awesome video Jesse ! After trying different methods, which one do you intend to stick to and why ?
yes please if you could do iphone 13 face id would be great
hi jesse...i dont have the original dot flex ribbon and dot project... how i can make a face id working perfectly..?
You can't
Jesse, thank you so much! You confirmed my suggestion about flashing with detached iR-camera. I had the same issue when was playing with nand.
I have a couple questions:
1. Can you please do the video about case of lost original data of Dot Projector. What if this JC chip goes bad, what then? You won't be able to read data.
2. Does orginal Dot flex cable (just the cable without dot module) contain any data? I have an iPhone with torn Dot flex and I just want to transfer Dot module to new OEM flex. Will it work?
3. Could you make a video about restore TrueTone and Face ID without original screen/reciever flex. JC has special receiver flexes. As I know you'll need to desolder nand and do parts unbind with P13. Would be great if you show the process.
Thank you!
1. Yes you can recover it by unbind through NAND
2. The OEM flex contains nothing
3. I have it recorded already. Just need to edit and will post soon ☺️
Hi bro., all sensor are showing value , but still face id is not working, tried rest also
hello for an iphone 14 does it work? or should you use Romeo2?
Does this work even if the Face ID tablecloth is not original?
It does not work for iPhone 14
Hey Jesse,
If im not able to read chip - says “chip broken” or something like that. What is the best thing to do?
Still not a response😔
Sounds like the chip is broken
Hi program isn’t reading the phone
Hi there I change LCD for iPad Pro 11/4generation and after when I change it the message Display facing ID disable any ???solution thank you
you probably damaged the ALS sensors on the top of the screen.
Hi boss, I have a question, my phone has the truedepth camera error, so from watching this video I test my phone with the jc software and my distsens and ambient light can’t be read so I checked my earpiece speaker and realized the flex was damaged, I fixed it with jumper wire and I’m pretty sure it’s intact, I put it back in my phone, it still can’t be read, I tried updating, it still won’t show up,
Do I need to restore to make it work?
There is problem with the jumper. best to swap to a new flex
So on Jc repair assistant if the IR camera is reading but giving me 00000000000000, does that mean it’s my IR camera is messed up and not allowing Face ID?
all zeroes means the phone has been restored without the ir cam plugged in.
plug it in & update or restore and see if the readings come back
@@VCCBoardRepairs I’m guessing the ir is broken if it’s reading that it’s not plugged in :/ thank you
What is a phone Doctor?
A doctor who fixes phones
I didnt mean to sound like that, I only was asking if there was a difference between a tech and a doctor, like maybe more school or something. @@VCCBoardRepairs
There is no such thing as a "doctor" in the phone repair industry
When I tried the method in this video, the IIC malfunctioned as well. Since I did not have a spare chip, I replaced it with a JC-Flex cable and it did not work correctly. Is this due to the fact that I replaced the cable? Is there a solution to this problem? Also, why can't I copy the data from the original flex cable?
If you read the original data before messing with it, then you can just write the data to the new JC flex and everything should work.
It's not the flex you're originally reading data from. It's the sensor
The JC flex has a new IC that you're programming
How fix batrre and lcd with out lcd and battre original brother hellp plz i have job 450 uni from distributor 😭 iPhone 11 12 and 13 pro max
I have a new original camera and FD. How to reprogram it and make it working,
( iPhone 14 Pro Max )
It’s not the same one that came with the phone
You can replace the front camera. You will have to flash an update. But Face ID will be lost. No way to fix Face ID
Good job explain in detail really appreciate it your rite Chinese don’t teach all the way
Glad it was helpful!
Hello brother. I Have IPad 8th generation. I Play PUBG mobile Everyday but I am facing the problem with iPad touch. I couldn’t use thumb gloves, it’s not working, plz tell me the solution. Thanks
the programmer is not recognising the true depth camera, any solution sir
i dont know how to answer that with so little information
face unlock is not working, send it for repair, and as per the repair person they checked it by connecting to a programmer to fix it but programmer is not able to recognize the true depth camera@@VCCBoardRepairs
👏👏👏👍👍
Thank you!