Why do you think there are bad? It is not easy to solder properly in one go. Some of them need extra reballing and positioning is also important. I used about 280-300 degrees C.
You need to read out the original rom before removing it and then you can save it to PC or cloud. When you are done with soldering down of the JC chip, then program it with an already saved dump.
Nie. oryginalnego EEProm'u nie zaprogramujesz, write jest zablokowany. ale juz kabelki/chipy od JC lub innych producentow ( np i2c) jak najbardziej. Jeśli chodzi o sam matrix to musi być oryginalny, na "obcym" ustawisz faceID ale tel sie nie odblokuje... Pozdro
Nice job Kris!
thank
Lekker bezig maat
Polska gurom!
JCID multifunctional programmer for iPhone screen true tone, Face ID, battery, receiver FPC flex cable vibration data read write repair, DFU purple screen mode, ect.
Geweldig!
What temperatures do you use because I bought 10 pieces and they were all bad
Why do you think there are bad? It is not easy to solder properly in one go. Some of them need extra reballing and positioning is also important. I used about 280-300 degrees C.
Do you need to read and write the dot projector after the repair?
You need to read out the original rom before removing it and then you can save it to PC or cloud. When you are done with soldering down of the JC chip, then program it with an already saved dump.
if i have an epprom record and a broken dot projector i can take another iphone and fix it this way
Nie. oryginalnego EEProm'u nie zaprogramujesz, write jest zablokowany. ale juz kabelki/chipy od JC lub innych producentow ( np i2c) jak najbardziej. Jeśli chodzi o sam matrix to musi być oryginalny, na "obcym" ustawisz faceID ale tel sie nie odblokuje... Pozdro
What chips name?
phoneparts.mt/product/jcid-face-id-chip-ic-for-iphone-x-to-12-pro-max-ipad-3-4-pro-universal/