Thank you game console repair legion for making this video and heck, for all videos you make! I was able to repair the power adapter to my days of play console! I will definitely subscribe! Once again thanks! P.S.----Don't pay any attention to negative comments. People's negative comments only show their ignorance and being full of foolish pride. How so? If you were to tell these negative commenters "oh yea you are correct and I was wrong", first they will bath in the tribute, then they will immediately tone it down a notch and let you know "ah you are ok. what you did was not all that bad or I was just playing around..... So basically it is to feel superior and the desire for tribute that these type of people want.
Hola amigo, entonces lo resolviste? Imagino que sabes de estas cosas yo intento a pesar de que no soy técnico podría cambiar la pieza pero.. como se llama esa pieza
Hi, appreciate the video and everything worked (power supply turned on and provided 12V when prompted, but as soon as it did, the new resistor I put in (same 16.2Ω 1% resistance from mouser) exploded. Should I try putting in a different (maybe bigger?) resistor or is it because something else is sending too much voltage through it? Also worth noting, even once it burned out, current jumped across the terminals of the resistor and continued to power the 12V.
I see a little burn spot on mine. The person I got it from must of had bugs. But I have it apart but don't know how to fix.. And it sucks I want to play.
Just buy the power supply on the internet. And replace it. Don't try to fix it yourself. I've heard it's dangerous. Could damage the whole console. And even cause a fire.
hola tengo una fuente N16-160P1A q enciende perfecto pero al momento de ejecutar un juego se apaga. encontre el problema. lo unico malo es q la leyenda del capacitor se rasgo y no llego a leer. si te paso la ubicacion del componente me podrias proporcionar el valor de dicho capacitor
I changed one MOSFET 60S600P7, it was in short. And place another 16 Ohm Resistor. The power supply generate the 4,8V of standby but it not generate the 12V. Could you help me what can I do?
For a level of repair you should choose the career of electronics technician, that would be enough to repair video game consoles. To create circuits from scratch and obtain a master's degree in electronics you must choose an electronics engineer
My 2115b PS4 slim will sometimes not turn on or even beep when the eject is pressed, but when it does work; it stays on without any issues for hours at a time. What would you think is the problem?
Bro! Please Help Me.. My PS4 Slim is not turning on. When i press the power button, it gives a beep sound with blue light but never turns on. Sometimes it works but its very rare. Once, while pressing the power button continuously for 30sec it throw a huge amount of white smoke from its back- left hand side. I got scared because it was like in movies, abundance amount of white smoke. Then I turned it on, it worked like a charm after white smoke. But the very next day when i tried it again, it gave me the same the beep + blue light. Can you please tell me what i can do? I feel like some capacitor sort of thing must have got busted or fused. Please give me some suggestion I'll try to resolve in my home. I know basic soldering and electronic stuff. Please help me.
Thanks for your help! Btw, got question to ask: Every time I power off my PS4 slim, I can't turn it on again. Power button don't work, eject button don't work, not even any beep. The only way to turn it on again is to open the PS4, take the powersupply, disconnect the power supply from the motherboard, reconnect it again, and put the power supply back in. After doing that, the power button and eject button work perfect again, well at least after the next power off. So I end up never shut down my ps4 slim. Do you know what might be the problem here?
Hello friend, from Argentina, your videos are very good, I have the same source, which burned me two smd resistors, number r822, and I do not know what value it has, could you tell me the value of these resistances? thanks greetings from argentina
I buyer power supply this model n15-160p1a for my ps4 slim, nevertheless the original power supply the my ps4 slim is: adp-160cr, ¿powerr supply n15-160p1a is compatible with model adp-160cr?
Mine gave problem in the Mosfet that you changed, I would like to know the name of this or a similar one with the same voltage amperage because I live in Brazil and I can't find this model, and I don't know if a mosfet from any source would solve the problem, because it would be easier there.
HEY man My Ps4 slim power supply (ADP-160Cr) got smoked while im playing But my ps4 not turn off itself so ill unplug it immediately,,,, i open it ive noticed some liquid chemical was come out on both sides of the PCB
I carried out this repair and got the power supply working again. Shortly after it has failed again. Is there anything else that could be causing the failure?
michael tuckey maybe it shorted or maybe some type of Capacitor or fuse went out I say get your voltmeter and test it again check your solder points and if all else buy a new power supply
So i noticed in the beginning of the video when u plugged it in u pressed the power and eject button but my eject button beeps just not my power button will this still work
@@zoheb4you2002 I used that 16.2Ω 1% from Mouser Electronics that he shows, but it burn out. I haven’t figured out what to do. I think either something is broken or shorting and sending too much power or I need a higher power rated resistor
@@RepairLegion Hello! Thanks for the feedback! I have another question, maybe you can help me ... I've been able to test the source off the PS4, and apparently it's working. The 12v and the 5v are coming off as it should. But the console does not turn on, if you press the power button, it beeps and does nothing, it does not turn on any led. If you press the eject button, it makes 3 beeps and does not eject the disc. You do not even want the cooler to spin. I forced the source to stay connected with the 12v direct and when connecting the PS4 in the outlet, the cooler turns and soon to, but also does not turn on the console. In this way, if you connect the power supply to the power outlet and get "moving", the orange led flashes, but it also does not work. Could this problem be related to the source? Or is it some more serious problem? Is it worth buying a new source and taking chances?
@@RepairLegion Thanks for the feedback! I've just bought a new PSU and ETA is next thursday. I will install it, test and let you if it works. If even a new PSU does'nt solve the problem, do you have any ideas which i could try to solve this issue?
Hello @PS4 Repair 101 My new PSU arrived, I installed it and the problem persists. Just one beep when I try to connect and 3 beeps when I try to eject the disc (the disc is inside but not ejected) Any idea what might possibly be the problem?
I have a ps4 slim and I opened the power supply, on the cover under where the power supply goes it looks like brownish like if so,etching burned up, on the back of the board on the green where ur fixing it looks kinda weird like if it burned too but I grabbed the board and it shocked me? Lol dumbass my heart hurts
Thank you game console repair legion for making this video and heck, for all videos you make! I was able to repair the power adapter to my days of play console! I will definitely subscribe! Once again thanks!
P.S.----Don't pay any attention to negative comments. People's negative comments only show their ignorance and being full of foolish pride. How so? If you were to tell these negative commenters "oh yea you are correct and I was wrong", first they will bath in the tribute, then they will immediately tone it down a notch and let you know "ah you are ok. what you did was not all that bad or I was just playing around.....
So basically it is to feel superior and the desire for tribute that these type of people want.
Muito obrigado, meu jovem! Um abraço a você aqui do Brasil!
14:18 DANGERRRRRRRRR!!!
i have so many of these lying around i need to take out time to start fixing them nice vid thanks
Nikesh Gupta do it
Bonito un crack el men saludos ese problema me pasó
Hola amigo, entonces lo resolviste?
Imagino que sabes de estas cosas yo intento a pesar de que no soy técnico podría cambiar la pieza pero.. como se llama esa pieza
Hi, appreciate the video and everything worked (power supply turned on and provided 12V when prompted, but as soon as it did, the new resistor I put in (same 16.2Ω 1% resistance from mouser) exploded. Should I try putting in a different (maybe bigger?) resistor or is it because something else is sending too much voltage through it? Also worth noting, even once it burned out, current jumped across the terminals of the resistor and continued to power the 12V.
I see a little burn spot on mine. The person I got it from must of had bugs. But I have it apart but don't know how to fix.. And it sucks I want to play.
Just buy the power supply on the internet.
And replace it.
Don't try to fix it yourself.
I've heard it's dangerous.
Could damage the whole console.
And even cause a fire.
Pl tell me about details of you replaced both items
hola tengo una fuente N16-160P1A q enciende perfecto pero al momento de ejecutar un juego se apaga. encontre el problema. lo unico malo es q la leyenda del capacitor se rasgo y no llego a leer. si te paso la ubicacion del componente me podrias proporcionar el valor de dicho capacitor
Nice video, can you tell me the markings or the value of the green ceramic capacitor TH! on the primary side? Thank you :)
What is the ohms of register and number of mosfet
Great vid and infoo , can u tell me the U601 and Q901 marking code or type of component ?? Thank U
I m not getting C1045DW mosfet what to do any ulternate
I changed one MOSFET 60S600P7, it was in short. And place another 16 Ohm Resistor. The power supply generate the 4,8V of standby but it not generate the 12V. Could you help me what can I do?
be careful if you guys try this, I got a good shock when prying the plastic off lol
wish I saw 2:40 earlier lol
Lol
I need help with the value of the capacitor located CX3 please
Might I ask what course do I take in college to learn how to those kind of things?
Actually I plan on taking computer engineering
For a level of repair you should choose the career of electronics technician, that would be enough to repair video game consoles.
To create circuits from scratch and obtain a master's degree in electronics you must choose an electronics engineer
My PS4 have a similar problem. If I place a Resistor of 24.7 Ohm, it have some problem?
Have you had any problems with these diode bridge power supplies?
I have 220 V at the input, but - and + there is no voltage.
Thank you for your help !!!
thanks man! saved my mind!
i dont have 5 volts at the 5 volt out-put.
n15-160p1a is for 2015a and n16-160p1a is for 2015b? or is complete compatible? n15 have 5+ 5- S 5+. n16 have 5+ 5- S S
My 2115b PS4 slim will sometimes not turn on or even beep when the eject is pressed, but when it does work; it stays on without any issues for hours at a time. What would you think is the problem?
Bro! Please Help Me.. My PS4 Slim is not turning on. When i press the power button, it gives a beep sound with blue light but never turns on. Sometimes it works but its very rare. Once, while pressing the power button continuously for 30sec it throw a huge amount of white smoke from its back- left hand side. I got scared because it was like in movies, abundance amount of white smoke. Then I turned it on, it worked like a charm after white smoke. But the very next day when i tried it again, it gave me the same the beep + blue light. Can you please tell me what i can do? I feel like some capacitor sort of thing must have got busted or fused. Please give me some suggestion I'll try to resolve in my home. I know basic soldering and electronic stuff. Please help me.
Hi, what is the name of solder sucker gun you are using?
Are some mosfets supposed to have continuity through them
Thanks for your help!
Btw, got question to ask:
Every time I power off my PS4 slim, I can't turn it on again. Power button don't work, eject button don't work, not even any beep. The only way to turn it on again is to open the PS4, take the powersupply, disconnect the power supply from the motherboard, reconnect it again, and put the power supply back in. After doing that, the power button and eject button work perfect again, well at least after the next power off.
So I end up never shut down my ps4 slim. Do you know what might be the problem here?
Hello friend, from Argentina, your videos are very good, I have the same source, which burned me two smd resistors, number r822, and I do not know what value it has, could you tell me the value of these resistances? thanks greetings from argentina
What tools did you use to check out the problems?
Hello sh2h0019 u601, what can be replaced???
I buyer power supply this model n15-160p1a for my ps4 slim, nevertheless the original power supply the my ps4 slim is: adp-160cr, ¿powerr supply n15-160p1a is compatible with model adp-160cr?
Como sufrí cuando cayó la resistencia xD jajajajajajaja
Mine gave problem in the Mosfet that you changed, I would like to know the name of this or a similar one with the same voltage
amperage because I live in Brazil and I can't find this model, and I don't know if a mosfet from any source would solve the problem, because it would be easier there.
I think the case said 16.2 ohm 1%. Seems like of low but i didn't see a K so..
I have a short DIODE where D901 is on the board all the way on the right side. I took the DIODE off and the short is on the board. Any suggestions?
You are probably measuring the transformer windings
How many ohms on the resistor? What colors? the video is not visible.
Take from ps3 slim brick is the same.
16.2Ω
i have a ps4 slim N160A005L i checked every thing you did and everythings good still not powering up can you help
HEY man My Ps4 slim power supply (ADP-160Cr) got smoked while im playing But my ps4 not turn off itself so ill unplug it immediately,,,, i open it ive noticed some liquid chemical was come out on both sides of the PCB
Bryan Alfonso contact me on Facebook for easier communication
Great vídeo, thanks friend like i't
How do you know which diodes and stuff are supposed to have continuity and which aren't?
milkm4n69 compare against good working boards.
I carried out this repair and got the power supply working again. Shortly after it has failed again. Is there anything else that could be causing the failure?
michael tuckey maybe it shorted or maybe some type of Capacitor or fuse went out I say get your voltmeter and test it again check your solder points and if all else buy a new power supply
Where did you go to school to learn these things
So i noticed in the beginning of the video when u plugged it in u pressed the power and eject button but my eject button beeps just not my power button will this still work
Lilspeedy 2550 is ur power supply bad?
@@RepairLegion thats what i think but idk i gotta order one tho and i dont wanna order the wrong one
Lilspeedy 2550 slims have other issues. Such as your describing and is not the power supply.
@@RepairLegion what do u think it might
Hi my power supply is reading 11.38 volts does that mean its faulty please ? As sure it should be 12v
Same me have problem do you fix?
Thank you
where do you buy the components from ?
please can u give me the name of the mosfet please !!!
did you get the name of the mosfet?
Registance colour code or value pls
16.2Ω 1% tolerance. But when I replaced mine with that it proceeded to light on fire, so idk
@@tedyee7533 so which registor u used
I used 1k registor its burst out...
@@zoheb4you2002 I used that 16.2Ω 1% from Mouser Electronics that he shows, but it burn out. I haven’t figured out what to do. I think either something is broken or shorting and sending too much power or I need a higher power rated resistor
@@tedyee7533 16.2 ohms is wrong,this person has suggested wrong registor and he already apologized, the right registor is 0.16 ohms
nice video
my ps4 slim 2115b turn on and shuts off fast after the the beep then no power after that do you know why?
it shorts out
Diazfamilyizzy it’s a bad power supply
@@RepairLegion thanks
Can I fix this exact problem?if so any tips
Thanks my
Has anyway to force PSU power on when it's not connected to PS4?
William Gustavo Marquetti cross stand by and 5v pins
@@RepairLegion
Hello! Thanks for the feedback!
I have another question, maybe you can help me ...
I've been able to test the source off the PS4, and apparently it's working.
The 12v and the 5v are coming off as it should.
But the console does not turn on, if you press the power button, it beeps and does nothing, it does not turn on any led.
If you press the eject button, it makes 3 beeps and does not eject the disc.
You do not even want the cooler to spin.
I forced the source to stay connected with the 12v direct and when connecting the PS4 in the outlet, the cooler turns and soon to, but also does not turn on the console.
In this way, if you connect the power supply to the power outlet and get "moving", the orange led flashes, but it also does not work.
Could this problem be related to the source? Or is it some more serious problem? Is it worth buying a new source and taking chances?
William Gustavo Marquetti that does sounds like a bad power supply.
@@RepairLegion
Thanks for the feedback!
I've just bought a new PSU and ETA is next thursday.
I will install it, test and let you if it works.
If even a new PSU does'nt solve the problem, do you have any ideas which i could try to solve this issue?
Hello @PS4 Repair 101
My new PSU arrived, I installed it and the problem persists. Just one beep when I try to connect and 3 beeps when I try to eject the disc (the disc is inside but not ejected)
Any idea what might possibly be the problem?
I have a ps4 slim and I opened the power supply, on the cover under where the power supply goes it looks like brownish like if so,etching burned up, on the back of the board on the green where ur fixing it looks kinda weird like if it burned too but I grabbed the board and it shocked me? Lol dumbass my heart hurts
Can I just buy a new power supply?
louis vivas lol. Yes
@@RepairLegion I was playing at night and then the next day it wouldn't turn on. I don't know if it's the PSU or the mother board. Can you help?
See us on Facebook for help
Whose selling a power supply slim Acr-160