#75 Repair of PS4 Slim Fast Shutdown

Поделиться
HTML-код
  • Опубликовано: 27 авг 2024
  • In this video, I attempt to repair a PS4 slim that shuts down after flashing the blue light one time.

Комментарии • 89

  • @shakangel666
    @shakangel666 Год назад +10

    Amazing troubleshooting skills!!! I've never seen someone on RUclips understand and chase down a problem like this one without schematics. I really enjoyed this one. Awesome!! Keep them coming please!!!

    • @ToltecMerc
      @ToltecMerc  Год назад +2

      Thank you so much! I do enjoy the hunt! Sometimes you just know it has to be right in front of you!

  • @geraldnaicker32
    @geraldnaicker32 Год назад +2

    Excellent video, the best ps4 troubleshooting video I've seen thus far

    • @ToltecMerc
      @ToltecMerc  Год назад

      Thanks so much! I'm glad you liked it!

  • @ajaks7636
    @ajaks7636 4 месяца назад +1

    Incredible troubleshooting!! Thank You for the Education.

    • @ToltecMerc
      @ToltecMerc  4 месяца назад

      I'm glad you enjoyed! You are quite welcome!

  • @maniax199
    @maniax199 Год назад +3

    I love your videos. Always explaining your logic to find the folt. I noticed in 27 min that one of the three resistors had a hole in it (the second one). Thx for your great videos.

    • @ToltecMerc
      @ToltecMerc  Год назад +2

      Thank you! I did not notice a hole. I still have the resistors so I can go back and take a look. Thanks for watching and commenting!

  • @Andreas_Straub
    @Andreas_Straub Год назад +3

    Impressive troubleshooting! Learned a lot.

    • @ToltecMerc
      @ToltecMerc  Год назад

      Thank You! I'm glad you enjoyed!

  • @toolsarecool
    @toolsarecool Год назад +3

    Tricky one, nicely tracked down!! Funny that it turned out to be the FB resistors after I thought I saw what looked like a pinhole (probably wasn’t) in the middle one @28:40
    Very educational repair, THANK you for sharing these!

    • @ToltecMerc
      @ToltecMerc  Год назад +1

      I'm pretty sure that's a solder ball. I think these resistors just age over time when exposed to heat and high voltage.

  • @Sonic2903
    @Sonic2903 Год назад +1

    Brilliant. Absolutely brilliant. The more videos I'm watching from you, the more I'm impressed and enjoying to watch! :)

    • @ToltecMerc
      @ToltecMerc  Год назад +1

      Thanks so much! I'm glad you liked it! Hopefully, more to come.

  • @kevinmagsy0312
    @kevinmagsy0312 Год назад +1

    Geez ur so good at this sir!!! Its a trash to most of us, but you make it came alive again with a proper diagnostic… thanks for educating us it helps earth greener

    • @ToltecMerc
      @ToltecMerc  Год назад

      That's very kind of you. Thanks!

  • @JessicaRyan7of9
    @JessicaRyan7of9 Год назад +2

    Thank you for posting this interesting repair. I learnt something new today. Thank so much 🙂.

    • @ToltecMerc
      @ToltecMerc  Год назад

      You're welcome! Thanks for stopping by and commenting. It's always appreciated!

  • @Trucam2020
    @Trucam2020 Год назад +2

    Excellent troubleshooting video.

    • @ToltecMerc
      @ToltecMerc  Год назад

      Thank You! I'm glad you enjoyed!

  • @freistedts
    @freistedts Год назад +2

    Amazing troubleshooting!

  • @rdflo6739
    @rdflo6739 3 месяца назад

    Fabulous Repair. Thanks for sharing. I particularly like it that you share the thought process and trials and failures. Really useful and interesting.

  • @zane383
    @zane383 Год назад +1

    i have two psu's with this issue. i learn so much from you man you're so good at this ! am glad i've subscribed to you

  • @cristiansantos5742
    @cristiansantos5742 Год назад +1

    You are the best, professor !!

  • @ob1skywalker82
    @ob1skywalker82 Год назад +3

    wow amazing debugging as always and awesome find. enjoyed it 👍

    • @ToltecMerc
      @ToltecMerc  Год назад

      Thanks so much! I'm glad you enjoyed!

  • @jonathansandiford4137
    @jonathansandiford4137 Год назад +1

    Thanks m8, I been struggling with this exact problem on 5 different psu. I was speaking with SteveBe just yesterday about it, and he was of the opinion that I should check those 2 meg resistors as they deal with current sense for the power factor correction ic.
    Thanks for posting this. I certainly enjoyed it!

  • @pjhb_microsoldering_portugal
    @pjhb_microsoldering_portugal Год назад +1

    Nice one 👍, love your videos, greetings from Portugal 🇵🇹

    • @ToltecMerc
      @ToltecMerc  Год назад

      Thank you! Greeting from the US!

  • @allenfleckney5969
    @allenfleckney5969 Год назад +1

    Great fix. Thanks for sticking with it.

    • @ToltecMerc
      @ToltecMerc  Год назад

      Thank you! I don't like to give up on a repair!

  • @Senux-Video
    @Senux-Video Год назад +1

    Perfect. At first i think, issue is one of capacitor (filter) 450V/47mF.

    • @ToltecMerc
      @ToltecMerc  Год назад

      Thank you! The capacitors are a possibility.

  • @erroos
    @erroos Год назад +1

    Great video to help me with the really similar problem I have with PS4 Slim customer brought to me

    • @ToltecMerc
      @ToltecMerc  Год назад +1

      Thank you! I'm glad it helped!

    • @erroos
      @erroos Год назад

      @@ToltecMerc in the end it wasn't power supply issue, but i knew alot new with these vids

  • @theevee1995
    @theevee1995 6 месяцев назад

    You're awesome, my PS4 is having the same problem, unfortunately I don't have these skills 😊😊

  • @LucaSpeedd
    @LucaSpeedd Год назад +1

    Intermittent faults are really hard to find the cause. these feedback loop resistors usually change because of the glue that over time creates resistance and changes the value of the resistors, I already got some that just cleaning the glue solved the defect..

    • @ToltecMerc
      @ToltecMerc  Год назад +1

      Hmmm. I hadn't considered the glue. Thanks for watching!

  • @isahizhenfahm6576
    @isahizhenfahm6576 Год назад +1

    Wew!! That was a tough one.

    • @ToltecMerc
      @ToltecMerc  Год назад

      Sometimes they are! Thanks for watching!

  • @rfr653
    @rfr653 Год назад +1

    Good job mate 👍

    • @ToltecMerc
      @ToltecMerc  Год назад

      Thanks! Just about to upload another!

  • @a.a.2677
    @a.a.2677 Год назад +1

    The middle 2MOhm original resistor had something on it, not sure if it was a solder ball or a pinhole (43:48).
    Aniway, very interesting repair. 🙂

    • @ToltecMerc
      @ToltecMerc  Год назад

      Yeah, solder ball I think. Thanks for stopping by!

  • @ufo540
    @ufo540 Год назад +1

    This defect of pfc voltage falling gradually after the power on happens quite here in Brazil .... thanks for the tips. ...

  • @BarikYT
    @BarikYT 6 месяцев назад +1

    Mega video. Thank you.

    • @ToltecMerc
      @ToltecMerc  6 месяцев назад

      You are quite welcome! Glad you enjoyed!

    • @BarikYT
      @BarikYT 6 месяцев назад

      @@ToltecMerc I admire your skill and patience

  • @richardstone8615
    @richardstone8615 Год назад +1

    Good content 🎉

  • @nikeshgupta8362
    @nikeshgupta8362 Год назад +1

    Hi i was trying to fix an adp-300fr today which was roach damaged.I replaced the fuse and the 40N60M2 that was blown also the 1612A3 but i cant get the volts on the caps to go to 395V like it should when i try to turn the 12V on. I checked the line from pin 8 of the 1612A3 but there is nothing damaged there. . I dont know what else to do :(
    Your videos are amazing pls keep making them i really appreciate all the work you put into them. Thank you!

    • @ToltecMerc
      @ToltecMerc  Год назад +2

      You may have to find another supply to compare to. You can see if your high voltage is trying to go up briefly and shutting back down. There are some large value resistors in the feedback circuit that can be damaged. They will cause this issue.

    • @nikeshgupta8362
      @nikeshgupta8362 Год назад +1

      @@ToltecMerc Hi thanks for replying I checked the resistors which were in M ohms on the feedback but they seem to be ok even replaced them but no change . They goto 2 transistors Q1 and Q2 going to replace thoes n see . The voltage does go up to 325v from about 310v then it shuts it self off . I replaced thoes 2 transistors but still the same the volts won't goto 395v any suggestions on how to test the pfc circuit ?

    • @nikeshgupta8362
      @nikeshgupta8362 Год назад +1

      I managed to fix it . I re soldered all the optos and the DNP012AH chip and its working fine.

  • @jluismejia6600
    @jluismejia6600 Год назад +1

    Grandioso, thanks for share

  • @cysrandomthoughts1087
    @cysrandomthoughts1087 Год назад

    Really interesting video, awesome repair

    • @ToltecMerc
      @ToltecMerc  Год назад +1

      Thanks for stopping by and commenting!

  • @Andreapippero9201
    @Andreapippero9201 Год назад +1

    Thanks for sharing! Very ineresting and helpful! I've the same problem on my psu ADP-240CR (I've found a bug that have shorted mosfet FB13), checked the resistor with multimeter they measure 2.42MOhm that seems a little bit low because they should be 2.7MOhm, should I try to replace them? which wattage and tolerance should I buy?

    • @ToltecMerc
      @ToltecMerc  Год назад +1

      It is very difficult to measure high value resistance in circuit because of parallel resistances and voltage remaining on capacitors. Desolder the resistor and test again. I find it easiest to heat the resistor and just spin it around so it is only making contact on one end but is still held in place. Also, you might clean any flux off of it before measuring.

  • @josedavidjerez9076
    @josedavidjerez9076 Год назад +2

    muy bueno el video ...bien explicado ,habra forma de que se pueda tener subtitulo asi de sa manera se entiende mejor cuando explicas

  • @jameskenney5623
    @jameskenney5623 Год назад

    I just found your channel, and I'm hooked. Thank you for all of the great explanations that you do.
    I have a long way to go, but I love to learn. Where would you suggest I start? I have almost all of the tools needed, and I can solder. I just need to understand how it all works together like you do, although it seems like you probably did something like this for a living.
    It's clear you didn't just hook up a multimeter and expect to immediately find a problem. You understand how it works better than any other RUclipsr I've seen.

    • @ToltecMerc
      @ToltecMerc  Год назад

      Thanks for the kind words. I have been working with electronics for about 40 years but only recently started working on consoles. I’m having a lot of fun. I would recommend buying something broken and start trying. You can learn a lot watching others so it is a good idea to pick something somewhat common that others also work on. You really have to learn by doing. You will pick up knowledge along the way. I don’t recommend starting with power supplies because of the dangers. Good luck!!

  • @John-oo9xu
    @John-oo9xu Год назад +1

    Hi mate, can you tell me what power supply bench you have? Like what specs. Thanks in advance!

    • @ToltecMerc
      @ToltecMerc  Год назад +1

      I have several bench supplies. In this video, I used an old HP E3620A. It's a two channel, 0-25VDC, 0-1A power supply.

    • @John-oo9xu
      @John-oo9xu Год назад

      @@ToltecMerc Thank you!

  • @karlhartl7371
    @karlhartl7371 5 месяцев назад

    Please Teacher... where is the 39 ohm resistor located... it is connected between which pfc pin and which 12v ic pin.. please

  • @JoseRivera-cd8xb
    @JoseRivera-cd8xb Год назад +1

    hy... have a ps4 slim as that one with same simptom turns of then off like that one and stays dead until u unplugged ac power and same thing again... u recomend swap power supply? thnkxx

    • @ToltecMerc
      @ToltecMerc  Год назад

      That does sound like a power supply problem.

  • @imedhelal9084
    @imedhelal9084 11 месяцев назад

    Tanks you

  • @muratrisvan
    @muratrisvan Год назад +1

    Thanx master ♥️🇹🇷

  • @user-dg3io4px6n
    @user-dg3io4px6n 5 месяцев назад +1

    I haven't seen this model ps4 that looks like this. Is this a model from overseas like uk or japan or somewhere

    • @ToltecMerc
      @ToltecMerc  5 месяцев назад

      It’s just a standard PS4 Slim. It is missing the outer shell.

    • @user-dg3io4px6n
      @user-dg3io4px6n 5 месяцев назад

      @@ToltecMerc i work on own stuff but just never seen a ps4 slim with this kind of plates is it an off brand plates cause it doesn't look normal to me but then again i never owned the slim model. But seen tear downs and stuff like that and never seen one with this kinda of setup with the antenna place ments and stuff

    • @user-dg3io4px6n
      @user-dg3io4px6n 5 месяцев назад

      @@ToltecMerc i still found the video interesting by the way it just looks funny compaired to some others i seen. So yea just werid curiosity of why it looks like this unless its a revised version i just never seen

  • @orion310591RS
    @orion310591RS Год назад

    26:58 - Whatever happened, it changed sound.

    • @ToltecMerc
      @ToltecMerc  Год назад

      I'm not sure. It sounds like my microphone came unplugged so the camera switched to the built-in microphone. Or perhaps my microphone got covered by the coat I was wearing.

    • @orion310591RS
      @orion310591RS Год назад

      ​@@ToltecMerc I have one suggestion/idea for youtube videos. Im not quite sure how its done, but I hope you will understand.
      You know that on video timeline, there is a possibility to show like segments, chapters. So on mouseover, people can see where which segment of video starts. I think it would be good overview, if we had something like that in those videos, for example 00:00 - 7:00 Visual Inspection, 7:00 - 9:00 IC1 , 9:00 - 13:00 IC2 and so on... then mark "Resistor solution" at the end.
      I know its one more step in editing on youtube but I believe it will be worth for viewer.
      He comes to this video and see, oh there is segment for this IC2 i wanted to check, I wanna see how he did it. And then he watch it. Othervise, he will just skip 42min video not knowing that info is there.

  • @Steve_be
    @Steve_be Год назад

    Can you send us a link for the 1101c chip, you can send pm nicely , does your veriac have a separate isolating mains in Tx, can find unit of hear i do have variac and mains isolating tx just be nice to have a all in one looking good…