I have spent hours / days searching and asking questions about using Starnet++ on a MAC. It's possible I just didn't understand what the variety of sources were telling me, but I was lost. I came across your video, followed it closely, and it worked!!!! Thank you for taking the time to create and post it!
Very helpful! Thanks for the insight. One thing I had to change (MacOS Ventura 13.5.1) was to allow applications from App Store and not App Store and identified developers. Before I changed this security settings, I was not able to upload the run file. Hope this helps someone. Cheers.
"play a little druuuumz, and you come back.. and its dun" 😂 thanks for your video! Only wondering, Starnet Star removal will not work directly in Siril then?
Still can't get this to work. I've checked multiple times and the image name is correct. I've tried with my image and the sample images in the folder. Still get "no suitable image found".
Dave, hi, thanks a lot for the great video. I'm a Mac user myself. If I may ask, what software do you use/suggest under OSX for doing bias/flat/dark corrections to images and registering them? Thanks!
Hey Antonio, this is wv astronomy speaking on behalf of Dave, just fyi... he says he uses Astro Pixel Processor for stacking and calibrating.. thanks for the comment!
long time user of StarNet on my Macs, suddenly nothing worked, so, I am trying this routine. But, I can't make this work either. I have followed and checked and rechecked but I get a message that my file is not a directory, or sometimes get no response at all. I have not wiped the version one out of the system yet, could that be a cause?
Hello Dave, I run into this error with my M2 MBP "line 2: ./starnet++: Bad CPU type in executable" when running the "run_startnet.sh". Been trying to search online but no luck so far, do you have any idea?
It's pretty easy to install on windows.. you can follow along the tutorial to see how I use it in my workflow. Also, there is a link to some RAW data if you want to follow along. 😀 Clear skies!
Sounds like a permission issue. Try to open the app in question and close the warning when it shows up. Click the Apple logo menu in the menu bar, and go to System Preferences > Security and Privacy > the General tab. There, you should see an option labeled Open Anyway in the Allow apps downloaded from the section.
fwiw, version 1 does not work either. I have tried on two computers, one with 10.13 and one with 10.15, both have the same errors and both are fresh downloads of StarNet.
Nice workaround but way too complex...I think I will just purchase StarXterminator despite the price it will run as a plugin which makes it so much easier...
Sorry about that bud, but your the first one to say this, so going by the 10k other people who have had success, maybe your doing something wrong or something.. if you can point out where your having trouble, I can try and help figure it out man. 👍
If you change the edit your run_starnet.sh to look like this, when you run it you will be prompted for the input filename and output filename, it will wait 10 sec after each then process and output your file. #!/bin/bash echo "Enter input filename: $input" sleep 10 echo "Enter output filename: $output" sleep 10 read input read output ./starnet++ $input $output
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I've been tearing my hair out trying to get StarNet to work - this worked first time. Still holds up despite march of time... Thanks, bro!
This is the first tutorial ive ever done in my life that worked first try and covered all possible issues. Legend.
Thanks Caleb! 😊
I have spent hours / days searching and asking questions about using Starnet++ on a MAC. It's possible I just didn't understand what the variety of sources were telling me, but I was lost. I came across your video, followed it closely, and it worked!!!! Thank you for taking the time to create and post it!
Thanks, this was super helpful. I'm a Masters in CS and I'm learning from you. Good stuff.
I got it to work on my Mac. I've recently started with astrophotography. It's a different beast haha. Thank you very much!! Clear skies!!
Thanks a Million Dave for this tutorial for starnet ++ on Mac it has helped me a ton
Thank you, sir! Never thought I got Starnet to work!
This was super helpful, I couldn't figure this out. Thanks a lot mate, well explained to a noob like me 👌
Thank you so much for this. It was exactly what I needed, and it worked like a charm. Much appreciated!
Thank you so much ! works perfectly ! You've got a new fan from France !!! :))))
Thank you very much worked perfectly
Thanks for helping me a lot for the installation.
Seriously, most helpful video ever
Thanks for the tips. I finally got it working with your help!
I’ve done it!!! Over moon. Thanks man!
Very helpful! Thanks for the insight. One thing I had to change (MacOS Ventura 13.5.1) was to allow applications from App Store and not App Store and identified developers. Before I changed this security settings, I was not able to upload the run file. Hope this helps someone. Cheers.
how can you do that, im stuck in this step
Hello,
Great instructions - unfortunately it doesn't work for me. Can it be related to the new Sonoma 14.0 operating system?
Thank you mate, this was super helpful and saved me from spending hours trying to figure out the solution. You sir are no dummy :)
This was so helpful thanks so much!
Hello, thank you from Japan. I could install and run Starnet++ v2.0. on my Mac.
LOVED THIS VIDEO!
Amazing workaround, properly working now! Superstar
Man, thanks for the vid. Worked like a champ!
"play a little druuuumz, and you come back.. and its dun" 😂 thanks for your video! Only wondering, Starnet Star removal will not work directly in Siril then?
Many thanks, i understand with your video how it work with macOS !!
This is amazing!! Thank you! Lifesaver!
Still can't get this to work. I've checked multiple times and the image name is correct. I've tried with my image and the sample images in the folder. Still get "no suitable image found".
Super helpful! thanks!
Dave, hi, thanks a lot for the great video. I'm a Mac user myself. If I may ask, what software do you use/suggest under OSX for doing bias/flat/dark corrections to images and registering them?
Thanks!
Hey Antonio, this is wv astronomy speaking on behalf of Dave, just fyi... he says he uses Astro Pixel Processor for stacking and calibrating.. thanks for the comment!
@@WVAA304 Thanks for the attention! Best.
long time user of StarNet on my Macs, suddenly nothing worked, so, I am trying this routine. But, I can't make this work either. I have followed and checked and rechecked but I get a message that my file is not a directory, or sometimes get no response at all. I have not wiped the version one out of the system yet, could that be a cause?
Hey, thanks for the feedback. I've talked to Dave and he says you should def try wiping the old version first
Hello Dave, I run into this error with my M2 MBP "line 2: ./starnet++: Bad CPU type in executable" when running the "run_startnet.sh". Been trying to search online but no luck so far, do you have any idea?
Hey man! Is there a windows tutorial for this?
ruclips.net/video/605qqrT0iDg/видео.html
Check out this video, there is a link in the description for the windows version.
It's pretty easy to install on windows.. you can follow along the tutorial to see how I use it in my workflow. Also, there is a link to some RAW data if you want to follow along. 😀
Clear skies!
Cool I got it to work. Now will someone please make a graphical interface for the Mac :)
Muchas gracias!!!
I’m a big dum dum and looking for a software that allows me to capture images on my Mac. Can you help me? Thanks
Hey, Matt. Dave here. Sorry for the delayed response. I use KStars/Ekos
@@dave_has_a_camera thank you!
I changed my file to rgb_test5.tif and it still is showing it cant run because I'm not verified???
Sounds like a permission issue.
Try to open the app in question and close the warning when it shows up.
Click the Apple logo menu in the menu bar, and go to System Preferences > Security and Privacy > the General tab.
There, you should see an option labeled Open Anyway in the Allow apps downloaded from the section.
Thank you so much!
fwiw, version 1 does not work either. I have tried on two computers, one with 10.13 and one with 10.15, both have the same errors and both are fresh downloads of StarNet.
For mac is no more available :(
Also, just copying and pasting didnt work either. Got hit with error every single time.
Nice workaround but way too complex...I think I will just purchase StarXterminator despite the price it will run as a plugin which makes it so much easier...
Tif f f f f f - hahahaha!!!
Dont work. Gof knows what you did. You went far too fast. Impossible to follow!
Sorry about that bud, but your the first one to say this, so going by the 10k other people who have had success, maybe your doing something wrong or something.. if you can point out where your having trouble, I can try and help figure it out man. 👍
you yap to much
If you change the edit your run_starnet.sh to look like this, when you run it you will be prompted for the input filename and output filename, it will wait 10 sec after each then process and output your file.
#!/bin/bash
echo "Enter input filename: $input"
sleep 10
echo "Enter output filename: $output"
sleep 10
read input
read output
./starnet++ $input $output