Jacob not a snowmobile engine unless they built some type of transmission for it has gears the riding video of it you can hear him shift at least 3 times
Très beau travail, cadre brasé comme les célèbres Seeley, Il existe encore des orfèvres qui savent travailler! Félicitations. J'adore le démarreur 👍😉. La musique distillée par un trois cylindres 2 temps reste un enchantement👍
Nah, it's cool, just lay yourself flat against these exhaust pipes to not be blown off at speed. I'm actually super impressed by them managing to build a gas tank in the rear fender frame to fit those pipes though
Maybe technically brazing, but you are not supposed to braze joints like that. Maybe he has engineered enough redundancy to allow weak joints in the frame...
Jairo Franco Yes... by no compression I mean the shocks are not adjusted and under tension for the springs to counter-act the downforce. I’m sure the engine is making a considerable amount of power but to make the rear squat like that takes almost nothing... just look at how slowly it comes back up - you could probably do the same effect with 5lbs of pressure with 2 fingers
@@tuliorodrigues476 dude, gas is basically free in your country with those prices, and you must be using some super low quality 2 stroke oil if it is that cheap, how can you be broke with practically prices that a newborn jobless homeless baby could afford??
For those than haven t seen the comment the bike has been ride already and succesfully the riding position is very good and natural ,i will do a onboard video soon ....
I am a real big 2 stroke engine fan myself and I just love the exhaust forced induction setup you guys have fabricated. It's a little rough around the edges but this thing is just a plenty neat prototype after all. It sure is a bitchin ride!
that's some beautiful welding and plumbing of the expansion chambers. I miss the days of Wayne Rainey and Kevin schwantz and Mic Doohan. awesome machine you guys are very talented.
how do you ride it? 3 boiling hot expansion chambers where the tank usually is. shirtless man won't want to hop on and lean forward lol. cool bike though.
Very very nice built. And also great job on exhausts. I know 2 stroke is totally different then 4. And that you got everything to fit and still calculated resonating chamber is incredible I think :). Rest of the bike is also insane nice haha. And very good Overal job. But I wouldn't lean to much forward while driving :p
Exhaust is beautiful. Just a heads up the middle cylinder will run hotter with more back pressure from the smaller size pipe and may be a pain to tune but a very nice project I tip my hat
you have done an amazing amount of interesting and very talented work. Well done indeed. Do you have a web page showing the process of how you built it, problems you encountered and decisions you made to overcome them? You have got a true" there is only on in the world" bike it deserves...you deserve to have it appreciated properly. As you can see from the comments there are a hell of a lot of people who do not understand what you have done with the bike. Thanks for sharing , good luck!
i was going to say wow. looks and performance. im only sketchy about the gold around the welds thats normally brazing here and that wouldnt be strong enough. cant wait to see it rip!
seems like it doesnt have so much different. look at 3:16 the big chamber for middle cylinder is actually slightly low hidden under the other 2 chamber
félicitations pour la réalisation. Pouvez-vous expliquer les différents volumes de pots de détente? De ce matériau, et que l'épaisseur et le diamètre sont des tubes du cadre? Merci
Nice! Like others have said it clearly looks to be putting the rider to far back but perhaps that's what's needed to ballast the weight. I think this is awesome. Maybe wrapping the pipes would keep heat away from the rider? Nice build guys.
My questions are...think you need that heavy of a clutch spring being it's barely moving the rear wheel? How do put a seat on it? And , how do keep from melting your flesh while hunched over the exhaust? It's one of those hey look what we did things but, I don't see shielding the exhaust and it actually being rideable.
I want to see more videos of this bike please. Very intrigued about the engine and drive train set up. It looks like a yamaha 700 triple, thats mated to a motorcycle gearbox 🤔 . I'm also curious why you chose brazing over welding? For the ease of designing and making modifications? Very cool build
Hey come on do you really think after building a bike like that one we didn t take the only possibility that we had to place the exhaust pipe!!!! Cylindre are reverse mean the exhaust port is facing the back of the bike !! Is that good enough answer for you ?
Once again we didn t get burn at all as the fake tank is covered with insulatiôn ,look to the other video where i ride the bike ,i still have my chest and nipples and they are great😋
CK Rock it’s a sled engine. What the fuck are you even talking about? You can’t even ride it. Brazed together, the expansion chambers are all different sizes, not tuned properly in the least. A 500 single would be a lot more powerful.
cop: *any modification?*
this guy: *compeletly stock*
Straight from the factory fam
cops aint catching him
overused
cops don't catch this guy
this guy catches cops
Completely stock......ha ha ha ha ha
"yes officer, it's stock"
😂
@@sumanthb7783 l
F
@@suntun5640 U
y ttt@@sumanthb7783 Öiyyyyg gyh
LOLOKKIHH o looo 9lu long to))) 5&&>gt:t:46&? i , i was+ jt
Everyone : wow how cool is this
My brain : how to ride it?
With a fire protection race suit, lol
Your not the only one.
Well made and worked out but completely impractical, it looks like a bit of a belly cooker 😂
@@Welderady lol true
Speak for your self I can’t stand it what a waist of time.
Absolutely one of the coolest and most insane motorcycles ever created!!! Epic. Belongs in a museum!!! Genius. Also, it comes with asbestos shorts.
someone: How much fuel does it comsume?
700cc 2 stroke with 3 cylinders: yes
Don't even ask 🤣🤣🤣
All of it...... 😂
Who cares ... your having fun
If he had of used a srx engine they are great on fuel not to mention wouldn’t be revving as much as a snowmobile driving a track
It doesn’t matter, you re dead before you empty the tank.
Just for the people that are unsure: this isn't a custom fabricated engine. This is an old snowmobile engine.
Gus Kelman no really
Jacob not a snowmobile engine unless they built some type of transmission for it has gears the riding video of it you can hear him shift at least 3 times
Still looks and sounds sick
Could be a outboard marine engine ?
karl alton no outboards engines are made so the pistons go back and forth not up and down
I love the fact he's retained the snowmobiles pull start 😍
That thing must be insane to ride! Nicely done gents! She's a beauty.
Ride it lol? They don't ride it silly, they just stand beside it and rev it up in the driveway...
now ride it shirtless hunched over the exhaust
@@ProdByPixx3l Well no fricking crap
Sounds fun lol
Get that FMF chest tattoo
Steak
All good.... Just remember to wear your Crocs!
Cop: is it street legal?
These guys: yeah but it has a different exhaust
Nice pfp. Lets make more fun of JJ xD
John Kramer what
John Kramer thank you
Vakio putki ja tk änkkä
The right answer is "do you see any exhaust?? it is electric man!!! The smoke is a just a special effect and the noise is recorded audio."
Que bala,até o trabalhar os faz bater palmas,parabéns pela máquina,felicidade,ABRAÇO,ALGARVE,PORTUGAL...
The expansion chamber for the middle cylinder is massively smaller than the outer two. Just wondering how that will affect performance?
Some call it a Crotch Rocket, others call it a Rice Burner, I call it a Crotch Burner
Oh shit, I get it……lmao
And i call it Cock burner
@@anuraghrajeev7092 awkwokwok... 🤣🤣🤣
I call it a body burner
Lmao
- police: thats legal?
- yes ,it's stock
Yo Waddup meliodas
Stolen comment
Ohh buddy! Damn that's a sick bike.
Absolute work of art! Beautiful bike
I wanna know what he's gonna do for a seat since the exhaust is right there
Yes😂
you dont sit on that bike.. it sits on you
sitting is for losers, everyone knows you stand on the handle bars.
It’ll get a cover that will prevent heat and u can lean on like gas tanks on normal bikes. I would assume
Look at my other videos you will see how to seat on it and nobody get burns until now...
700cc with a pull start! 😆😆
Lovely sound, great job
Out of a snowmobile most likely, they had pull start large cc 2 strokes way after bikes did away with them.
Omg, somones gonna cook his Balls with that😅😆 but that Beast is insane cool!
Pleasure to see that!
Très beau travail, cadre brasé comme les célèbres Seeley, Il existe encore des orfèvres qui savent travailler! Félicitations. J'adore le démarreur 👍😉. La musique distillée par un trois cylindres 2 temps reste un enchantement👍
THE MAIN QUESTION IS "HOW THE HELL WILL YOU SIT ?......."
Nah, it's cool, just lay yourself flat against these exhaust pipes to not be blown off at speed. I'm actually super impressed by them managing to build a gas tank in the rear fender frame to fit those pipes though
We ar yu guing my jancokk
You'll be roasted if you ride that bike..
With difficulty
maybe put some iced cuiras
0-100kmh takes as little as 2 fuel tanks
What a beautiful work of art!
Header pipes are gonna make for a helluva one time tattoo!
He isn't an engineer. He just likes brazing. It looks nice. He did a great job.
Looks more like tig brass brazing, technically isn’t welding on the frame, but good work none the less
This is not welded !!
smilie120 ya I was just about to say this was brazed not welded
Did some oxy Brazing in my mechanic course in college was very interesting looks really cool
Maybe technically brazing, but you are not supposed to braze joints like that. Maybe he has engineered enough redundancy to allow weak joints in the frame...
"ok, sh's ready. Now we have only figure out how to sit on it"
It is an RC vehicle I guess
@@jeanncarlosburellibrandell8002 yes.
Boys look at my other videos please....
@@slicks7300 k
That exhaust is gonna be ROASTING SOME NUTS
If u built ths?Then bloody well done it's a stunner!!!
This will be perfect for winter riding!!!! That exhaust will definitely keep you warm
or burn
😆😆😆😹
2:40 literally just revving in neutral compresses the shocks, what incredible torque
Looks like a good beginner bike
To be fair, those springs are literally rattling because they're so loose - there's no compression
@@racker5108 but the bike except the rear wheel moves down so...
Jairo Franco Yes... by no compression I mean the shocks are not adjusted and under tension for the springs to counter-act the downforce. I’m sure the engine is making a considerable amount of power but to make the rear squat like that takes almost nothing... just look at how slowly it comes back up - you could probably do the same effect with 5lbs of pressure with 2 fingers
It’s doing that because of imbalance not torque
I really cant brain this confg.. he so genius and brilliant 😂😂😂
He is going to roast his innies riding that exhaust!!
When you ride a 2 stroke, you don't care about fuel consume, because it's fun with it, feel the power of 2 stroke.
and don't mind being burned alive by those exhaust pipes
Even a 50cc😅🙈
in my country 1 liter of gas is about 1.30 dolars, and the 2 stroke oil 8 dollars for 500 ml, so it's expensive!!! we are broke
@@tuliorodrigues476 dude, gas is basically free in your country with those prices, and you must be using some super low quality 2 stroke oil if it is that cheap, how can you be broke with practically prices that a newborn jobless homeless baby could afford??
@@coomercommander2554 it depends on the wage you bum fuck, there are wage classes in every country, and currency conversion makes it look cheap
For those than haven t seen the comment the bike has been ride already and succesfully the riding position is very good and natural ,i will do a onboard video soon ....
The pressure of this 2 stroke blew this dudes shirt straight off
my man starting that beast like it's a lawnmower lmaooo
Cop: is it legal?
Driver: yeah the mufflers just a little worn...im on my way to get one
I THINK IT WAS REALLY SMART TO PUT THE EXHAUST PIPES THERE. THESE GUYS ARE BRILLIANT
YES THEY ARE. REALLY AWESOME OUTSTANDING EXTRAORDINARY SMART PEOPLE 👍👍👍
YES AMAZING IT HAS A COVER ON SNOWMOBILE ENGINE IT WHEN IT RUNS THEY DONT GET BURNT BUT GUESS
Don't forget the fully brazed not wielded frame!!!
The sarcasm xDD
Honda did it and it failed...
Thank you my 2 stroke fan. Luv it.
Looks like a Two stroke Ducati 👌. And it sounds epic
I am a real big 2 stroke engine fan myself and I just love the exhaust forced induction setup you guys have fabricated. It's a little rough around the edges but this thing is just a plenty neat prototype after all. It sure is a bitchin ride!
.
Best build I have ever seen I hope you can find something to cover those pipes would be cool to see you riding it!!
exhaust position at the top, is the best idea to make fried Mr.P 😂
INSANE build! watched it a few times now! have u got more vids?
that's some beautiful welding and plumbing of the expansion chambers. I miss the days of Wayne Rainey and Kevin schwantz and Mic Doohan. awesome machine you guys are very talented.
Engineering masterpiece, a symphony of pulses, pure poetry!
Padu di antara yang terpadu by yamaha 2stroke superbike 700cc..jauh jauh terbang melayang brooo..aku suka yamaha
Let me get my ceramic coated asbestos undies and I’ll take her for a rip.
underrated comment lol
@Chris young ....yes....testicles flambé......
Lol!!!?
He drives it with fireproof underpants lol
his poor nuts then xd
Made me die lol
@@danmartin6515 n
You just got to love that seat!?!?!
The pull start is a brilliant lightweight idea.
how do you ride it? 3 boiling hot expansion chambers where the tank usually is. shirtless man won't want to hop on and lean forward lol. cool bike though.
*Correction. Not a cool bike. But rather, a Hot bike ! ......Bellies Beware !
T1000AX
T1000AX probably his balls will get cook,,,🤪🤪
FREDDY SPENCER raced a 500 cc Honda with the exhausts there.
JSB still wouldn’t be as hot as a Ducati pan a gale 4 strokes run way hotter then 2 strokes
Very very nice built. And also great job on exhausts. I know 2 stroke is totally different then 4. And that you got everything to fit and still calculated resonating chamber is incredible I think :). Rest of the bike is also insane nice haha. And very good Overal job. But I wouldn't lean to much forward while driving :p
These new heated seats are crazy !
Exhaust is beautiful. Just a heads up the middle cylinder will run hotter with more back pressure from the smaller size pipe and may be a pain to tune but a very nice project I tip my hat
Officer: Is it street legal?
These guys: Yeah. But it has different airfilter
I don’t care how much faring / shielding you put on those expansion chambers... that beast is gonna give you chest burn 🔥
The 1984 NSR 500 V4 had this very exhaust layout and also that very problem.
Nice welds and layout
without a tank/exhaust-pad this bike will roast the drivers balls 😂
There’s nothing I love more than pull starting anything.
But it would suck if it stall in an intersection
Maybe you're a dad
I guess your a fan of tug jobs then lol
Stephen Ochipa hell yes. But only 2 strokes.
Quel travail!!! Gros respect pour cette recherche, cette patience et ce savoir faire... Vous êtes des pros les mecs!
That is going to be a hot ride real fast. That bike adds to the meaning of roasted nuts or roast beef. 😉
Madness 100%!! Love it!!
Surely there's a way to re route your exhaust, to ride this lol! The torque and speed would be overwhelming
@Shelly B. and you're a qualified expert!
Actually you aren't, you're common youtube trash with an opinion
Ok that's enough you biden fuck🤦♂️
Beautiful bike. Two stroke forever!
Yea fuck valves!
That exhaust gotta be hot AF!
"These are just aesthetic exhaust pipes for sure, otherwise where he sits."
"Wait... they are the actual pipes..."
See thé link below vidéo ,some others with fairings and riding it ...
No issue
you have done an amazing amount of interesting and very talented work. Well done indeed. Do you have a web page showing the process of how you built it, problems you encountered and decisions you made to overcome them? You have got a true" there is only on in the world" bike it deserves...you deserve to have it appreciated properly. As you can see from the comments there are a hell of a lot of people who do not understand what you have done with the bike. Thanks for sharing , good luck!
i was going to say wow. looks and performance. im only sketchy about the gold around the welds thats normally brazing here and that wouldnt be strong enough. cant wait to see it rip!
Wtf....3rd° burns on your chest all day long. Brilliant engineering
Jadi flash back ulang dulu video ini wah banget bagi gw, tiba tiba muncul lagi dibranda youtube, nostalgia
Looks cool doesn’t seem like it will be rideable at all.
Why not?
those pipe will toast you.,,
@@geistcarlo I mean, if you believed that someone would lie directly on top of the exhausts I agree that would get toasty.
@@Devantejah yeah.,, itas hard to ride that bike if if has a cover on that.,
@@geistcarlo Seems to be just fine though.
Just wondering how you configured that middle exhaust chamber it looks as if it would have a different power curve as the two outer cylinders?
seems like it doesnt have so much different. look at 3:16 the big chamber for middle cylinder is actually slightly low hidden under the other 2 chamber
so what did you guys do for the transmission?
How do you ride it while the exhaust alone is definitely very hot when it hits the groin
félicitations pour la réalisation.
Pouvez-vous expliquer les différents volumes de pots de détente?
De ce matériau, et que l'épaisseur et le diamètre sont des tubes du cadre?
Merci
Nice! Like others have said it clearly looks to be putting the rider to far back but perhaps that's what's needed to ballast the weight. I think this is awesome. Maybe wrapping the pipes would keep heat away from the rider? Nice build guys.
I dont think so
That’s impressive!
Runs good sounds good but how do you ride it? Without turning into a blister e crisp
Yes first ride was last friday and everything work fine ,next time i ll ride myself and let you know how it feel
does it feel hot?
lmao, this thing alomst lost his 2t sound.. haha
O zdavo prijatelji moji
Y EU escape aee 😂😂🗣️🔥
Gduxmfodw xz
Nice
WTF that shit is stupid as fuck we're are you supposed to sit lol
"Sooo uh where's the seat"
"Who said anything about a seat"
interesting experiment, with that exhaust you'd have to be superhuman to ride though
It's a good idea to learn how to cook human hotdogs 🤣🤣🤣😂😂😂
Thea Smith Halfhway more like cook meatballs
87th
Random guy: Why you got fired ?
Shirtless guy : i designed a bike which can boiled the riders eggs
🤣🤣🤣
what
Warum ist der Auspuff Krümmer unterschiedlich groß?
What an absolute BEAUT!
Nothing like laying on your exhaust when you ride! 😂👊
2-stroke triples sound awesome
My questions are...think you need that heavy of a clutch spring being it's barely moving the rear wheel? How do put a seat on it? And , how do keep from melting your flesh while hunched over the exhaust? It's one of those hey look what we did things but, I don't see shielding the exhaust and it actually being rideable.
How do you reach for the handle bars without burning your chest?
Took me a second to figure out where the fuel tank was. Monster pipes!
I want to see more videos of this bike please. Very intrigued about the engine and drive train set up. It looks like a yamaha 700 triple, thats mated to a motorcycle gearbox 🤔 . I'm also curious why you chose brazing over welding? For the ease of designing and making modifications? Very cool build
And when driving for a long time Is the exhaust pipe hot?
Audience - But how do you ride this bike?
Olivier - *Thats the neat part... You don't*
Of course you can, stay tuned, new video coming soon
And how do you plan on riding it with the pipes like that
Officer: Do you know why i pulled you over?
Scooter dude: Because i let you!
I have seen a lot of weird fabrication techniques over the years but never have I ever seen a complete frame held together with silicon bronze.
Safe-ady
The placement of the exhausts is stupid ;-)
Hey genius what would you do to place the exhaust ???
boutron olivier Place them the conventional way = downwards instead of upwards?
Hey come on do you really think after building a bike like that one we didn t take the only possibility that we had to place the exhaust pipe!!!!
Cylindre are reverse mean the exhaust port is facing the back of the bike !!
Is that good enough answer for you ?
But the pipes burn your chest :(
Once again we didn t get burn at all as the fake tank is covered with insulatiôn ,look to the other video where i ride the bike ,i still have my chest and nipples and they are great😋
Where do you sit? on exhausts?
Where would you put the seat on that bike?
700cc 2 strokes is a dream for all true biker!!!Compliments
CK Rock it’s a sled engine. What the fuck are you even talking about? You can’t even ride it. Brazed together, the expansion chambers are all different sizes, not tuned properly in the least. A 500 single would be a lot more powerful.
Explain how you can't drive it
Maico 700 dirtbike XD
@@shitpostcentraI fairing?
Fire eggs