A mate in Australia . Took his front shocks of and put stearing links in . No bobbing apart from the road surface. Hope it helps. He holds a speed record in the gold coats.
I know, just was hoping for a bit more, but we are now being made to work for every mile and hour. We god lucky with that take off, but its a tough littl truck as well
Just bought all the parts at the local rc shop. Gonna build this setup today. I got a 24 tooth pinion tho. Can't wait to see what my big rock will do now.
Very nice - hope you have fun and get some good speeds, we have found this to be a great platform, just need the summer to arrive again and get back out
Come on Dave.... stop telling the boys how to drive it and get behind the wheel to show them haha. Good passes... more space needed for 100mph for sure.
LOL, i know my place 😂, the boys drive far better than i do, get just as much fun watching the boys drive and see what they can do with the cars as i do driving them, plus me not driving mean far less to spend on repairs 😂😎 space is tight thats for sure, might have to pop over and borrow your runway 😂😂
Man you guys had it moving. 88 is proper quick, but it isn’t hardcore speed yet! 100 is just around the corner bro. I really admire how you have systematically addressed this build up and documented it. Great work
I think I saw pat in the background. Tell him we says hello. (Midwest greeting). Look forward to seeing what you do to remedy the aero and get more speed. Fun project to watch so far!
Sounds like the spur is not centered (concentric) to the hubs.. best way to approach that would be to use a sleeve around the center portion of the hub, so the bore of the gear stays centered..👍
Thanks for the tip, was thinking that as well, but when i checked after the runs it seems ok, but the nuts had been rubbing on one side of the housing, . they don't rub anymore and likely why the sound eased off during the day 😂😂
Man, I thought it was toast when it started to get sideways in the air! Nicely saved, seemed to defy the laws of physics lol! Good vid, I'm enjoying this little project, especially now its become clear that its not as easy to get it to 100mph as we all first thought.
Yeah it was scary when is went sideways, i have seen may a car do it here and some that dont end well. It sure is getting harder, each time we go out we chip away, but weather really sucked today for stage 5, wet ground and very windy
@@bradjrc196 It is longer but quite narrow with curbs each side, so if it goes wrong will be nasty. Have a plan and also working on hopefully getting on a runway
new to rc and i had a question.... i bought an arrma granite 3s. ran it once last week. and then after that the throttle wouldnt work, but the steering works. so i thought i had to calibrate the throttle, and it didnt do what it said in the instruction manual. so i took to my local rc shop and they couldnt help me. brand new car, just ran once. didnt get it wet or crash. but it wont work anymore. full charged 3s lipo. transmitter trims are good, but me and the guy at the hobby shop cant figure it out. the clutch is fine, the transmitter was tested and works correctly. any advice?? i havent had luck looking online. i dont want to return it to horizon yet, i just want to drive haha.
Its hard to say, but based on what you have said and the model shop looking at it then it sounds like the ESC may have died, if you bought it from the Modelshop they should deal with it rather than you sending it to Horizon. Hope you get it sorted
@@51im shit quality for the price of the cars, the felony is £650, it should be perfectly set up from factory, that’s part of what you’re paying for🤷🏼♂️
@@devinw9698 Im pretty sure the Mega has similar diffs and running gear as the v3 BLX cars, might be a few difference but dont onw a mega so hard to say. Only one way to find out 😂
Waiting on my mod 1 pinions right now and need to put it back together with my new motor. Going to test on a mod 1 19 pinion and 38 spur. Believe I need to use 21 or 22 pinion to get to 💯. I'm using a granite though. Definitely need a wing on the front but haven't go e that far yet
@@HardcoreRC I have 15-27t mod 1and remaining are arriving today or tomorrow. I have 2 motors to work with 2050kv and 3050kv. One of those 2 should get me near 90mph but think your right about aero being an issue around that point. Hoping to get a chance at a good pass this weekend. I still haven't saw a video with someone hitting 💯 mph with the plastic arrma chassis yet. highest I saw was a granite with 90.5 and claimed on 8s.
@@afterrunrc9935 Yes one of those should get you there, but likely need some aero. Typhon 3s cars have gone over 100mph: ruclips.net/video/dAN3ArF4Cmg/видео.html but i want to do it with the Big Rock body, more of a challenge 😎
mine is on a 6s 2200kv from arrma and im on stock tires and im going about 70 on my road at max speed that i have gotten, stock gearing and all... so i think i may hit 100 but i live on a curved road so maybe if i get a speed checker and a straight road i could ccome after you idk. all i did was put 6s in there stock gearing and tires just new esc and motor.
70mph on stock tires is good, but im guessing that will be able the limit on them before the car is totally uncontrollable or the tires explode, really need to then drop down to belted road tires and gear up due to the smaller tire. Good luck and welcome the competition 👍
Gearing wise she should be good for over 100mph, have put a bigger one in for stage 5, that is technically good for over 130mph, main issue is space and getting the power down, only seen a handful of cars get over 100mph in this carpark and break in time 😲
@@HardcoreRC yessir I did the similar setup on my 100mph typhon 3s. I ran 36t spur and I think 29t pinion I had to make some adjustment to the gear cover but I got it done. 105mph
What don’t be disappointed, more room is required if you had a longer run I think you would of made the 90mph mark 🤷♂️ been loving following this Dave don’t be disheartened 86mph on stock drive train wow keep up the great work 👌
Thanks - longer run and im sure we would have hit 100mph, just adds a new challenge of being able to get the power down, hit 100mph and break in the space we have.
@@HardcoreRC I'm being careful. This thing is nasty fast got to find somewhere else to drive it now. You can't even get half throttle on the street I live on. Can't believe how fast you got your big rock goin and how good the boys can drive they got skills on the controls.
I was thinking that as well, but went over the gearbox when home and seemed fine, however the nuts on the spool creation had been rubbing on the back end of the plastic gearbox, so im guessing that was making the sound as it doesnt really make the sound now
@@HardcoreRC if shaving the plastic isn't enough you can try dremeling down the head of the button screws! Also you can try making them countersunk to make them more flush, on that note why isn't there such thing as a counter sunk nut? Food for though😉
@@RSM53full Umm counter sunk nut, now there's an idea 😂 it was actually the counter sunk head side that was rubbing, i had taken care of the nut side and dremmeled down, what i hadn't counted on was the drive shaft actually pushed the spool and thus the counter sunk heads rubbed, they then did the filing down for me 😂
88mph Pretty dang close Put a spoiler on the front bump up the pinion 2-3 teeth I think you will get over a hundred Oh yeah never take the wing off the back You see what almost happened with Jacks last run lol Nice save by the way That was almost a disaster Keep it up guys Y'all got this
Thanks - the rear wing wont be coming off again that's for sure😂😂 i know that car can do it, just if we have enough room at this location, it was a tough day today for stage 5 wet ground and very windy
I'm just a novice but I thought the mesh looked not tight enough at the start of the video? I've got a big rock doing nothing at the moment and spare felony tires too 😎
Mesh is hard to set on these as really needs doing once the gearbox is together holding both sides of the slipper / spool, so you close it up and then feel how it sits with the little clicks, probably why Arrma used to have them with set pinion holes rather than a slider. Get those Felony tires on the Big Rock 👍
88😀 .. moving on up to the magic ton .. u will do it .. u could gear up a little more with wheel diameter. .bigger wheels will give u a higher top end .. keep pushing mate .. well done team hardcore 😎
Meh let fanboys hate. Got to get the 100mph whatever way it takes. And around 90mph you definitely need front aero. I hit 91 mph in the kraton 4s and front end lifted I couldn’t save it and ended up hitting a culvert breaking the chassis and rear diff housing. What made it hurt worse was I still had some throttle to go. Also in middle of moving so the repair and running have to be pushed back.
Totally agree, but some just hate Traxxas so much they then aim that hate at other who even mention the T word, so easier to add with a lighthearted comment first 😂😂 91pmh is very good going, got some aero on that seemed to work well, just really need to find a longer area and have some good weather now. Hope you get your K4S repaired soon and the move goes well
Hope the boys dont mind abit of rivalry but I think Callum is the safer bet for speed runs. He's got smoother trigger control, sorry jack but you hit the skate part better.
@@HardcoreRC we've all got different skills jack is epic at the park but Callum has that fine trigger control. Hope the lads are enjoying the 100mph project
@@mehimrc1314 Indeed - mine is filming and wrenching 😂😂 They are loving the project, Callum is itching to get his Limitless to over 100mph as well hit 99mph last year. Jack also now want to build a proper speed car
@@HardcoreRC get jack a 124019 haha his face might drop but I'll do 100mph. Yeah come to think of it how come you NEVER seem to drive or bash? And Callum will get the 100mph easy with that beast!
@@mehimrc1314 I will start driving again, but have fun watching the boys driving and enjoying themselves, plus when im not driving the repair bills are far less 😂😂 Do need to look at the WLtoys cars, seen them in the flesh now and they do look good
@@HardcoreRC I have the bog rock myself I’ve to the 17mm hex adapters, stock electronics, 26t pinion, and 1/8th buggy paddles, fried the stock electronics, next step is a 6s spektrum system and a bigger pinion...my thoughts are 100+mph
@@codynicholson230 Good luck with your build, hope you succeed, have a feeling you will need better tires than paddle tires and you will need to change from the stock spur and cant gear it up enough for 100mph
Sorry, couldn't help it, got so much abuse from some of them over some recent videos, plus most people know its just a bit of fun aimed at the die hard fanboys who seriously will give me abuse for putting a Traxxas part in the car, i kid you not. Personally i dont get it, buy and drive what makes you smile is the main thing 👍
@@HardcoreRC I read Project "Road rock" then I read a " - " and then 100mph stage 4. Please learn to write correctly and not like clickbaite because this car is a fail and not a "world record".
@@bretzeletouffeur7401 Show me a Big Rock going faster ? Even the Thumbnail says Project 100mph. Were do i say world record ? think you need to learn to read dear boy. You call the car a fail, lets see your Big Rock going this fast then, oh you cant as you haven't. Some people are so dumb
@@HardcoreRC Why should I show my car going faster than yours to demonstrate your title is clickbait ? You say some people are so dumb and I agrea with you !
@@bretzeletouffeur7401 LOL i will rewrite what you just said, i cant show you my Big Rock going faster as it hasn't, that's if you even have a Big Rock. So out of 3,000 views on this video you are the only one who thinks it click bait, and if i add in the view for stages 1, 2 and 3 that's 19,000 people who haven't claimed click bait. As i said some people or just dumb. Please note i did mark this not made for kids so not sure you should be watching it anyway 😂
204mph would be worlds fastest RC car, worlds fastest Arrma is current 172mph, but this is for a Big Rock with Big Rock Body etc, trying to keep as stock as possible. I could have put a GT body on, put side skirts on etc and been well over 100mph by now, but that is not what we are trying to do 👍😎
Totally agree, but you will be surprised at the hate i will get for even touching a Traxxas part, yet alone putting it in an Arrma car, there are some very hardline Arrma guys out there, so easier to get comment in a lighthearted way to try to keep them at bay 👍
A mate in Australia . Took his front shocks of and put stearing links in . No bobbing apart from the road surface. Hope it helps. He holds a speed record in the gold coats.
Thanks for the info - going to use foams as well so using the links may help on foams
Don’t be disappointed- still really cool seeing a Big Rock do 88mph - how it’s not in bits is amazing after the in run flight! 👍😊😎
I know, just was hoping for a bit more, but we are now being made to work for every mile and hour. We god lucky with that take off, but its a tough littl truck as well
Good job. Mod 1 gearing is awesome
Had to move it over to mod 1 - not sure the stock gearing could have taken it
Just bought all the parts at the local rc shop. Gonna build this setup today. I got a 24 tooth pinion tho. Can't wait to see what my big rock will do now.
Very nice - hope you have fun and get some good speeds, we have found this to be a great platform, just need the summer to arrive again and get back out
@@HardcoreRC Yes I can imagine it's a lot colder there than in the US. I live in South Carolina.
@@justinwalker923 South Carolina, very nice
@@HardcoreRC Thanks I'm charging my GPS speedometer then gonna make some passes in 3,4, and 6s. Hope you guys have a Merry Christmas.
@@justinwalker923 Thanks, hope your passes go well and you have a great Christmas as well 👍👍
Come on Dave.... stop telling the boys how to drive it and get behind the wheel to show them haha. Good passes... more space needed for 100mph for sure.
LOL, i know my place 😂, the boys drive far better than i do, get just as much fun watching the boys drive and see what they can do with the cars as i do driving them, plus me not driving mean far less to spend on repairs 😂😎 space is tight thats for sure, might have to pop over and borrow your runway 😂😂
Man you guys had it moving. 88 is proper quick, but it isn’t hardcore speed yet! 100 is just around the corner bro. I really admire how you have systematically addressed this build up and documented it. Great work
Thanks - we have to hit 100mph or we cant call ourselves hardcore 😂😂 like to share as it then helps others do this if they want to 👍
I think I saw pat in the background. Tell him we says hello. (Midwest greeting). Look forward to seeing what you do to remedy the aero and get more speed. Fun project to watch so far!
I did see Pat in the background - will try to remember to pass on when i see him next 👍 think we go the aero sorted 😎
Really enjoying this series, inching closer to the ton 🙂
Thanks - yes we are getting closer each time, just have to keep chipping away, really need a longer area
Would those tire fit on the OUTCAST 4s ?
Yes they should as Outcast 4s has 17mm Hex already
awesome ptoject . love to you behind the wheel for a run
Thanks, maybe once we have hit 100mph i will have a run, my reactions are not as good as they used to be 😂
Sounds like the spur is not centered (concentric) to the hubs.. best way to approach that would be to use a sleeve around the center portion of the hub, so the bore of the gear stays centered..👍
Thanks for the tip, was thinking that as well, but when i checked after the runs it seems ok, but the nuts had been rubbing on one side of the housing, . they don't rub anymore and likely why the sound eased off during the day 😂😂
Defo a rocket 🚀! Can't wait to show you lot the new location it's epic 👌😁
Looking forward to seeing the new location - doe look very good 👍 mega find by you and Si
@@HardcoreRC we are going this sunday and the weather is looking 😎
@@jaayyboy28 Wont be this Sunday sadly as its Jack's 18th - think he still wants to go out bashing but it will have to be Essex way where he lives
Love the video keep up with the good work
Thanks - we are trying 👍
Man, I thought it was toast when it started to get sideways in the air! Nicely saved, seemed to defy the laws of physics lol! Good vid, I'm enjoying this little project, especially now its become clear that its not as easy to get it to 100mph as we all first thought.
Yeah it was scary when is went sideways, i have seen may a car do it here and some that dont end well. It sure is getting harder, each time we go out we chip away, but weather really sucked today for stage 5, wet ground and very windy
Excellent video 😊👍
Thank you very much!
Foam tires must be a logical next step?
May be, but they would be a smaller diameter, the two issues we are fighting now is Aero and having enough room
Great vid , I really thought it was going to hit the 90s as well. Oh well that’s part of testing, keep up the good work .
Thanks, its getting hard to earn each MPH now, wondering if we have enough room in this carpark
@@HardcoreRC try it out on that road you go to , looks like more room .
@@bradjrc196 It is longer but quite narrow with curbs each side, so if it goes wrong will be nasty. Have a plan and also working on hopefully getting on a runway
@@HardcoreRC ah wicked can’t wait to see that.👍🏻
That was some good speed you are getting there
Thanks - getting closer to our target
How do I get a nice chassis protestor for ..kraton 6s..limitless.infraction an slash gt!?
This is where i get mine from - very good www.arrmaskinz.com/
new to rc and i had a question.... i bought an arrma granite 3s. ran it once last week. and then after that the throttle wouldnt work, but the steering works. so i thought i had to calibrate the throttle, and it didnt do what it said in the instruction manual. so i took to my local rc shop and they couldnt help me. brand new car, just ran once. didnt get it wet or crash. but it wont work anymore. full charged 3s lipo. transmitter trims are good, but me and the guy at the hobby shop cant figure it out. the clutch is fine, the transmitter was tested and works correctly. any advice?? i havent had luck looking online. i dont want to return it to horizon yet, i just want to drive haha.
Its hard to say, but based on what you have said and the model shop looking at it then it sounds like the ESC may have died, if you bought it from the Modelshop they should deal with it rather than you sending it to Horizon. Hope you get it sorted
Check connections in the receiver box. Make sure everything is tight and in the right place
Have you balanced the wheels. Even a slight out of balance can really drag down the speed.
They’d be balanced from factory, or should be since they’re £40 a pair.
@@R53.charlie You would think they put diff oil in their diff's too, but they don't seem to from what I've seen.
@@51im shit quality for the price of the cars, the felony is £650, it should be perfectly set up from factory, that’s part of what you’re paying for🤷🏼♂️
I balanced them for Stage 5 👍
Never known them to be balanced from factory, but for the price they should be
Did you fit a bigger spur gear?
No, for sure he didn’t fit a bigger spur if i got faster. By fitting a SMALLER spur you go faster
@@corottolino953 wondered why he ground the gearbox casing.
Yeah bigger pinion smaller spur for speed...
Stock is 57 tooth, fitted a 38 tooth and made it a spool, no slipper clutch now
Yep gear dropped from 57 to 38 tooth and slipper clutch removed, now running a spool
The nuts on the spool creation were rubbing on that part so i had to grind it down i a little
Do you think the senton mega is capable or the same thing?? On stage two by the way with my senton just building right now
Which Senton mega do you have ? the latest version V3 ?
@@HardcoreRC yes v3.. I clocked it at 45 mph but that was with a 45a esc n 3300kv motor with mt tires…I want to see numbers badly
@@devinw9698 Im pretty sure the Mega has similar diffs and running gear as the v3 BLX cars, might be a few difference but dont onw a mega so hard to say.
Only one way to find out 😂
@@HardcoreRC what motor kv should I use to achieve those speeds
@@devinw9698 How fast do you want to go and how much modding do you want to do ?
What esc combo thats is if you dont mind
Awesome video
Thanks dude, we are getting there inch by inch 👍
@@HardcoreRC keep at it m8 even your presence on camera is getting better mate doing really well
@@rcclan Hehe thanks - still have loads of takes to get the better ones in front of the camera 😂
I like the little show boat. . How'd the other boys take it.
All in good spirt - but the gauntlet has now been set 👍
What a great video! Truly enjoyed this 👍🍻
Glad you enjoyed it 👍
Oh yeah let’s see what we get this time!!!
Ok 88 is pretty good given the space. Hopefully next pass is over 100mph. Keep it up!! 👊👊👍👍
Thanks - we are chipping away slowly but surely now, space is a real issue though
1st,love this project,how are you 🙂great video 👊🏻keep it up
Thanks! Will do!
I was waiting for someone else to do this. Been working on it myself. Almost there
Thanks how have you been getting on with it ?
Waiting on my mod 1 pinions right now and need to put it back together with my new motor. Going to test on a mod 1 19 pinion and 38 spur. Believe I need to use 21 or 22 pinion to get to 💯. I'm using a granite though. Definitely need a wing on the front but haven't go e that far yet
@@afterrunrc9935 Likely need a bigger pinion, i started in 21 tooth
@@HardcoreRC I have 15-27t mod 1and remaining are arriving today or tomorrow. I have 2 motors to work with 2050kv and 3050kv. One of those 2 should get me near 90mph but think your right about aero being an issue around that point. Hoping to get a chance at a good pass this weekend. I still haven't saw a video with someone hitting 💯 mph with the plastic arrma chassis yet. highest I saw was a granite with 90.5 and claimed on 8s.
@@afterrunrc9935 Yes one of those should get you there, but likely need some aero.
Typhon 3s cars have gone over 100mph: ruclips.net/video/dAN3ArF4Cmg/видео.html but i want to do it with the Big Rock body, more of a challenge 😎
Great project indeed , keep it up 👍🏻
Thanks, will do!
Hey just add a flux capacitor and you can go back to the future! Lol nice vid guys love watching the progression.
hehe thanks - that would be cool to see it disappear 😂
mine is on a 6s 2200kv from arrma and im on stock tires and im going about 70 on my road at max speed that i have gotten, stock gearing and all... so i think i may hit 100 but i live on a curved road so maybe if i get a speed checker and a straight road i could ccome after you idk. all i did was put 6s in there stock gearing and tires just new esc and motor.
70mph on stock tires is good, but im guessing that will be able the limit on them before the car is totally uncontrollable or the tires explode, really need to then drop down to belted road tires and gear up due to the smaller tire. Good luck and welcome the competition 👍
✌🏻😎🏴86mph is still awesome dude. Looking forward to stage 5👍🏻
Indeed - was just hoping for a bit more, it sure is making us work for it now
Nice. She needs a much larger pinion for sure. Try 29t.
I'd also look at replacing that traccas plastic spur with a hot racing 36t steel gear
Gearing wise she should be good for over 100mph, have put a bigger one in for stage 5, that is technically good for over 130mph, main issue is space and getting the power down, only seen a handful of cars get over 100mph in this carpark and break in time 😲
Does that fit on the Arrma slipper plates ?
@@HardcoreRC yessir I did the similar setup on my 100mph typhon 3s. I ran 36t spur and I think 29t pinion I had to make some adjustment to the gear cover but I got it done. 105mph
@@jaymitchrc Nice - 105mph is very good 👍 what motor were you running ?
What don’t be disappointed, more room is required if you had a longer run I think you would of made the 90mph mark 🤷♂️ been loving following this Dave don’t be disheartened 86mph on stock drive train wow keep up the great work 👌
Thanks - longer run and im sure we would have hit 100mph, just adds a new challenge of being able to get the power down, hit 100mph and break in the space we have.
Just bought the spektrum 6s 150 amp esc and 2050kv motor gonna put it in my big rock.
Nice - that's going to fly 👍
@@HardcoreRC I installed it. I have steering but no throttle. Tried to calibrate the esc and transmitter but no luck.
Swapped transmitter and receiver and it works. Also have a 23 tooth pinion on stock spur and slipper.
@@justinwalker923 sounds good, is that still on the stock 0.8mod plastic spur ? if so take it easy, i swapped out to e metal spur to start with
@@HardcoreRC I'm being careful. This thing is nasty fast got to find somewhere else to drive it now. You can't even get half throttle on the street I live on. Can't believe how fast you got your big rock goin and how good the boys can drive they got skills on the controls.
Sick
Thanks 👍
that "v8" sound is because that gear isnt centered on the hub, mesh will constantly change while running, not good for motor or bearings
I was thinking that as well, but went over the gearbox when home and seemed fine, however the nuts on the spool creation had been rubbing on the back end of the plastic gearbox, so im guessing that was making the sound as it doesnt really make the sound now
@@HardcoreRC if shaving the plastic isn't enough you can try dremeling down the head of the button screws! Also you can try making them countersunk to make them more flush, on that note why isn't there such thing as a counter sunk nut? Food for though😉
@@RSM53full Umm counter sunk nut, now there's an idea 😂 it was actually the counter sunk head side that was rubbing, i had taken care of the nut side and dremmeled down, what i hadn't counted on was the drive shaft actually pushed the spool and thus the counter sunk heads rubbed, they then did the filing down for me 😂
88mph Pretty dang close Put a spoiler on the front bump up the pinion 2-3 teeth I think you will get over a hundred Oh yeah never take the wing off the back You see what almost happened with Jacks last run lol Nice save by the way That was almost a disaster Keep it up guys Y'all got this
Thanks - the rear wing wont be coming off again that's for sure😂😂 i know that car can do it, just if we have enough room at this location, it was a tough day today for stage 5 wet ground and very windy
I'm just a novice but I thought the mesh looked not tight enough at the start of the video?
I've got a big rock doing nothing at the moment and spare felony tires too 😎
Mesh is hard to set on these as really needs doing once the gearbox is together holding both sides of the slipper / spool, so you close it up and then feel how it sits with the little clicks, probably why Arrma used to have them with set pinion holes rather than a slider.
Get those Felony tires on the Big Rock 👍
88😀 .. moving on up to the magic ton .. u will do it .. u could gear up a little more with wheel diameter. .bigger wheels will give u a higher top end .. keep pushing mate .. well done team hardcore 😎
Thanks - we are getting there, slow and steady 👍
the mcfly big rock 😎
Hehe, hopefully the first and last time it flies 😂😂
Meh let fanboys hate. Got to get the 100mph whatever way it takes. And around 90mph you definitely need front aero. I hit 91 mph in the kraton 4s and front end lifted I couldn’t save it and ended up hitting a culvert breaking the chassis and rear diff housing. What made it hurt worse was I still had some throttle to go. Also in middle of moving so the repair and running have to be pushed back.
Totally agree, but some just hate Traxxas so much they then aim that hate at other who even mention the T word, so easier to add with a lighthearted comment first 😂😂 91pmh is very good going, got some aero on that seemed to work well, just really need to find a longer area and have some good weather now. Hope you get your K4S repaired soon and the move goes well
niceeee friend!🤪🤪+1
Thank you 🤗
Sounds like a Limitless
Thanks -0 does sound pretty awesome as it goers flying by 👍
First and i liked as well
People are getting super fast for first now - love it 👍
Turn your dual rate down for speed runs...
Did that for stage 5 today, was getting very twitching in the wind 😂
Hope the boys dont mind abit of rivalry but I think Callum is the safer bet for speed runs. He's got smoother trigger control, sorry jack but you hit the skate part better.
They dont mind at all, they will both be happy with your complements 👍
@@HardcoreRC we've all got different skills jack is epic at the park but Callum has that fine trigger control. Hope the lads are enjoying the 100mph project
@@mehimrc1314 Indeed - mine is filming and wrenching 😂😂 They are loving the project, Callum is itching to get his Limitless to over 100mph as well hit 99mph last year. Jack also now want to build a proper speed car
@@HardcoreRC get jack a 124019 haha his face might drop but I'll do 100mph. Yeah come to think of it how come you NEVER seem to drive or bash? And Callum will get the 100mph easy with that beast!
@@mehimrc1314 I will start driving again, but have fun watching the boys driving and enjoying themselves, plus when im not driving the repair bills are far less 😂😂
Do need to look at the WLtoys cars, seen them in the flesh now and they do look good
So there’s not a 100mph Big Rock yet?
Sadly not, but there will be at the end of the month, hopefully
@@HardcoreRC I have the bog rock myself I’ve to the 17mm hex adapters, stock electronics, 26t pinion, and 1/8th buggy paddles, fried the stock electronics, next step is a 6s spektrum system and a bigger pinion...my thoughts are 100+mph
@@codynicholson230 Good luck with your build, hope you succeed, have a feeling you will need better tires than paddle tires and you will need to change from the stock spur and cant gear it up enough for 100mph
@@HardcoreRC oh yea I just bought the paddles cheap, definitely gonna use some belted tires lol
I got a black screen the whole time 😔
Problem solved
Black screen ? seems to work fine here
@@HardcoreRC I was using 4k and RUclips didn't like it
Cool vid..No need to feed into the "fanboy" stuff though imo
Sorry, couldn't help it, got so much abuse from some of them over some recent videos, plus most people know its just a bit of fun aimed at the die hard fanboys who seriously will give me abuse for putting a Traxxas part in the car, i kid you not. Personally i dont get it, buy and drive what makes you smile is the main thing 👍
@@HardcoreRC Just totally ignore it, don't feed the trolls, even by saying the word...
@@mymodel6 Can be easier said than done sometimes, sometime its easier to tackle it head on and beat them to the punch 👍
Title is clickbait, why not 400 mph ?
What does the title say, oh yes it says "Project" maybe try reading 🤷♂️🤷♂️
@@HardcoreRC I read Project "Road rock" then I read a " - " and then 100mph stage 4. Please learn to write correctly and not like clickbaite because this car is a fail and not a "world record".
@@bretzeletouffeur7401 Show me a Big Rock going faster ? Even the Thumbnail says Project 100mph. Were do i say world record ? think you need to learn to read dear boy.
You call the car a fail, lets see your Big Rock going this fast then, oh you cant as you haven't. Some people are so dumb
@@HardcoreRC Why should I show my car going faster than yours to demonstrate your title is clickbait ? You say some people are so dumb and I agrea with you !
@@bretzeletouffeur7401 LOL i will rewrite what you just said, i cant show you my Big Rock going faster as it hasn't, that's if you even have a Big Rock.
So out of 3,000 views on this video you are the only one who thinks it click bait, and if i add in the view for stages 1, 2 and 3 that's 19,000 people who haven't claimed click bait.
As i said some people or just dumb.
Please note i did mark this not made for kids so not sure you should be watching it anyway 😂
204+ mph. World's fastest Armma? Gotta go faster than the World's worst pyramid shaped Ebay schemer Kevin.
204mph would be worlds fastest RC car, worlds fastest Arrma is current 172mph, but this is for a Big Rock with Big Rock Body etc, trying to keep as stock as possible. I could have put a GT body on, put side skirts on etc and been well over 100mph by now, but that is not what we are trying to do 👍😎
who cares whatever work
Totally agree, but you will be surprised at the hate i will get for even touching a Traxxas part, yet alone putting it in an Arrma car, there are some very hardline Arrma guys out there, so easier to get comment in a lighthearted way to try to keep them at bay 👍
I own 2 traxxas and two arrma, different but both AWESOME
@@saransmith8773 100% correct, brand shouldn't come in it, buy what you like and what brings a smile to your face 👍