Vw tdi 2.0 cjaa egr delete how to. Parts included!

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • A couple people asked about removing the cooler itself so I figured on my wrecked car I would show it is possible.
    Guys remember subscribing to the channel and commenting on these videos inspires us to make more content around this information.
    Brass fitting: UPDATE 3/4 fitting!
    amzn.to/4e1tQ0E
    Expanding plug:
    amzn.to/4a9BX9t
    Guys support the channel as much as possible we appreciate every single one of you!

Комментарии • 49

  • @3guysgarage
    @3guysgarage  11 дней назад

    I have updated the fitting in the description!!! 3/4 fitting

  • @CyberScott86
    @CyberScott86 7 месяцев назад +8

    Thank god a video that’s talking about this. There’s no content thank you

    • @3guysgarage
      @3guysgarage  7 месяцев назад

      Hoping it gets more traction there’s barely any info on RUclips about this so I hope it blows up some lol

  • @the506thPIR
    @the506thPIR Месяц назад +1

    FYI for those looking to do this op linked to a 3/8" barb but you need a 3/4" as you can see when he shows the package for the fitting.
    Best of luck 👍

  • @gmcjetpilot
    @gmcjetpilot Месяц назад +1

    You can delete with a tune alone (BUT ONLY FOR TRACK OFF ROAD USE) and leave much of this installed. As far as high pressure you really need to remove the whole tube and block at turbo. You can leave EGR valve and block that, or add the race pipe.

  • @guntherdrawert2041
    @guntherdrawert2041 2 месяца назад +1

    I really thank you im deleting my vwtdi and i was just wonder how to plug that hole in the turbo0.... tha k you so much

    • @3guysgarage
      @3guysgarage  2 месяца назад

      All we ask is a sub in return 😊

  • @zpossani2607
    @zpossani2607 День назад +1

    Thanks for uploading this video really helpful.
    one quick question where to get a software for it. Thanks.

    • @3guysgarage
      @3guysgarage  19 часов назад

      @@zpossani2607 multiple options but this vehicle had Stevenson tuning on it

  • @3guysgarage
    @3guysgarage  6 месяцев назад +4

    I just want to say thank you guys so much don’t forget to sub and like the video!
    Full parts list in the description!

    • @robertjones1246
      @robertjones1246 15 дней назад

      Needs to be 3/4 not 3/8 in the link but thank you for this video. It's been incredibly helpful!

  • @danielsmith4021
    @danielsmith4021 Месяц назад +2

    It’s 3/4 x 3/4 on the Brass fitting

    • @3guysgarage
      @3guysgarage  Месяц назад +1

      @@danielsmith4021 clearly misspoke

    • @danielsmith4021
      @danielsmith4021 Месяц назад

      @@3guysgarage no worries, it’s a Great Video

    • @SuperMrboomboom
      @SuperMrboomboom 12 дней назад

      ​@3guysgarage you're linking a 3/8ths in the description 😊

  • @PrecisionRifleGroup2
    @PrecisionRifleGroup2 2 месяца назад +1

    Thanks brother!

  • @davidsmithers3353
    @davidsmithers3353 19 дней назад +1

    The brass fitting is 3/4 x3/4 Think you link shows the wrong one

  • @danielhertz7266
    @danielhertz7266 4 месяца назад +1

    Great work!

  • @kevinformuziewich8108
    @kevinformuziewich8108 3 месяца назад +2

    You said 3/8 Brass fitting in video but the bag your showing says 3/4 brass fitting ? ..

    • @3guysgarage
      @3guysgarage  3 месяца назад

      I definitely misspoke

    • @micahhurley4146
      @micahhurley4146 2 месяца назад

      @@3guysgarage the amazon link is wrong too since you linked a 3/8 brass fitting

  • @gseppi
    @gseppi 7 месяцев назад +2

    Great video. You're right there is not much info about this. How hard was it getting cooler out?

    • @3guysgarage
      @3guysgarage  7 месяцев назад +1

      Once the filter is out it’s about the same as far as difficult but without removing the filter I would say completely impossible

  • @kierenmck2790
    @kierenmck2790 5 месяцев назад +1

    Got a question for you bud , someone has allready done a cooler bypass on my car, left the old coolant line leading to the 2nd pump in at front , its now leaking exhaust and causing boost problems , will that expanding plug sort that out ?
    Tiguan 2.0tdi cr

    • @3guysgarage
      @3guysgarage  5 месяцев назад

      No I did a video on the race pipe shutter valve delete you need to delete that pipe from your manifold

  • @devinjacoby9880
    @devinjacoby9880 Месяц назад +1

    Where does one find said “ race pipe” can’t find any products

    • @3guysgarage
      @3guysgarage  Месяц назад

      I would highly recommend watching my other video that’s better than the race pipe it deletes the shutter valve as well!

  • @radulepg
    @radulepg 8 месяцев назад +1

    Greeting.
    Does removing or blanking the EGR affect the operation of the particulate filter? Will it clog quickly?
    I was thinking of doing the same with the EGR as you, but leaving the DPF until it starts causing problems.
    Passat b7 2.0 TDI 125kw 2012.
    Thanks for the reply, cheers!

    • @3guysgarage
      @3guysgarage  8 месяцев назад

      This is on a wrecked vehicle so I believe you’d have to remove the emissions to get away with this

  • @Imean8
    @Imean8 Месяц назад +1

    I removed my egr and dpf I didn’t label any plugs what are rhe 3 connections for on the intake side

    • @3guysgarage
      @3guysgarage  Месяц назад

      I’m not sure what you mean

    • @Imean8
      @Imean8 Месяц назад

      @@3guysgaragethere’s 3 plugs coming from the front of the motor and I think they go in the back of the motor but I’m not sure where they plug into

    • @Rahe01
      @Rahe01 20 дней назад

      @@Imean8 did you figure it out?

    • @Imean8
      @Imean8 20 дней назад

      @@Rahe01yeah 2 went to the egr valve and the other was for something on the intake

  • @guntherdrawert2041
    @guntherdrawert2041 2 месяца назад +1

    How many sensors do i havecto keep ??

    • @3guysgarage
      @3guysgarage  Месяц назад

      Basically anything you see unplugged you don’t need to keep?

  • @kpound40
    @kpound40 6 месяцев назад +1

    Where can we find the racer pipe to cut out the butterfly valve?

    • @3guysgarage
      @3guysgarage  6 месяцев назад

      Click man channel did an entire video on it

    • @3guysgarage
      @3guysgarage  6 месяцев назад

      My channel**

  • @danielsmith4021
    @danielsmith4021 Месяц назад +1

    So where is the Next Video ?

    • @3guysgarage
      @3guysgarage  Месяц назад

      @@danielsmith4021 on what?

    • @danielsmith4021
      @danielsmith4021 Месяц назад

      @@3guysgarage I thought you were going to show a video the dpf and that out of the way too clearly for off road purposes

    • @danielsmith4021
      @danielsmith4021 Месяц назад

      @@3guysgarage do you guys know wheee I can find a Tune Zilla ??

  • @forgottenknowledge8917
    @forgottenknowledge8917 4 месяца назад +1

    Nobody cares in my state. "Choo" everywhere I go. Lmao

  • @TurboA4
    @TurboA4 6 месяцев назад +1

    Software needed?