YAESU WiRES-X: More Info

Поделиться
HTML-код
  • Опубликовано: 26 янв 2025

Комментарии • 38

  • @coryt8482
    @coryt8482 5 лет назад +3

    When using a digital repeater in my area to connect to wires x, if i connect to a node. Am I tying up the repeater with my rx/tx traffic like an analog repeater would be? Will other locals be able to use the same repeater to listen to other nodes, the same time as me?

    • @HamRadioTV
      @HamRadioTV  5 лет назад

      Good question. I've forwarded this to Brian the presenter of this video.

    • @USAFJUNKIE
      @USAFJUNKIE 5 лет назад

      I guess a good way to test would be if you have two radios or you have a buddy listen in on that repeater while you connect to a node and talk on it.

    • @wdsracer
      @wdsracer 4 года назад

      What was the answer to your question?

    • @coryt8482
      @coryt8482 4 года назад

      When you change rooms on the repeater, you are changing what everyone else hears as well. Proper way to change rooms on a repeater is to listen to see if repeater is in use, say your call and say you are going to change rooms. Then put the repeater back on its normal room when you are finished.

  • @Thingstodointenn
    @Thingstodointenn 4 года назад +4

    Lot of talk but very little information. Gets to the part where a video is going to start to explain HOW to use Wires X and it cuts off. Would love to have at least a link to the video.

    • @HamRadioTV
      @HamRadioTV  4 года назад +1

      Good feedback. I will let Brian know.

  • @johnstrunck3659
    @johnstrunck3659 5 лет назад +4

    Audio is coming through, but I see no video here?
    73

  • @vetinger
    @vetinger 2 месяца назад +2

    This is not HAM connection if you use an internet!!! If in case of emergency, an internet disappears wires-x will not work!!!

    • @Porco_Utah
      @Porco_Utah 6 дней назад

      it is the way Ham to get to know each other through internet.

  • @dimapo8712
    @dimapo8712 5 лет назад +1

    Thank you

    • @HamRadioTV
      @HamRadioTV  5 лет назад +1

      You are welcome! Thanks for watching!

  • @ArndroidInc
    @ArndroidInc 3 года назад +2

    This video seems to be oriented towards people who know about wires x. Not much of an introduction.

    • @HamRadioTV
      @HamRadioTV  3 года назад

      Thanks for the input! How about instead of "Intro" I'll call it "More Info"

    • @ArndroidInc
      @ArndroidInc 3 года назад +1

      @@HamRadioTV That would be a better title. An even better idea would be a video introducing wires-x.

  • @drinaz4070
    @drinaz4070 5 лет назад +1

    Portable HRI Mode does NOT require a second radio - just run it in DIRECT mode. Additionally, in portable HRI mode (either DIRECT or Access Point), you CAN connect to "mixed" rooms without the extra analog cable set (SCU-39 or SCU-40); it is just that you cannot hear an analog station (although sometimes they'll come thru your PC speakers) and they cannot hear you. Too bad for them.

    • @HamRadioTV
      @HamRadioTV  5 лет назад

      Thank you for the clarification. I will pass this along to the presenter.

  • @tuckergary1516
    @tuckergary1516 4 года назад +2

    this is great. sadly my call is expired. and I live in laos no hams alowed

    • @HamRadioTV
      @HamRadioTV  4 года назад +1

      Thank you! Oh, that's a bummer your licensed expired. How long has it been? I believe if its 2 years or less, you just have to fill out the form online and send in $15. Was your call N6TUX? If it was you still have till this December. 73

    • @Sugarsail1
      @Sugarsail1 4 года назад

      Why would any red blooded American move to a commie ass country like Laos that doesn't allow hams?

  • @ervarakathrunada3146
    @ervarakathrunada3146 Год назад

    Can I use my Yaesu FT 2980 R/E with WIRE-X connected, because as I read manual book it can be,, How about that my friend, I looking forward to hearing from u my friend, regards QRU 73 YD5AXV 🙏

  • @georgessamara5592
    @georgessamara5592 3 года назад +1

    Soooo, it is useless buying just a wire-x hand held, you will also need a hotspot??? a transceiver and HRI and computer, to talk? way too expensive way to communicate.

    • @HamRadioTV
      @HamRadioTV  3 года назад

      A Yaesu FT-70 or FT-3DR will work fine if there is a C4FM Fusion repeater in the area. Wires-X is just another fun way to communicate. Some also say HF is way to expensive too.

    • @georgessamara5592
      @georgessamara5592 3 года назад +1

      @@HamRadioTV what a coincidence :-) just received my FT-70DR and a diamond antenna. Also by accident I found a fusion repeater (is it same as C4FM) not far from me. I am only listening at the moment and assessing what I need to move forward. Studying for a licence, At the moment no budget for a home base or a mobile transceiver. Still have a lot to learn, reading Yaesu manuals. Subbed.

  • @tmo7734
    @tmo7734 4 года назад

    The presenter's explanation is not very clear. I will continue to search RUclips...

    • @HamRadioTV
      @HamRadioTV  4 года назад

      Sorry to hear that. This was a presentation at local club meeting.

    • @tmo7734
      @tmo7734 4 года назад

      @@HamRadioTV No Problem. 73.

  • @rickytee9578
    @rickytee9578 5 лет назад +4

    This is very misleading. Whoever this guy is he does not know anything about digital radio. Don't waste your time like i did watching this video.

    • @HamRadioTV
      @HamRadioTV  5 лет назад +2

      Thank you for your input. Brian is leading the charge in getting our club into the Fusion/Wires-X world. I'm also new to this new mode and thought it was an informative presentation as I stood behind the camera. Could you share a link to a video on this topic you like?

  • @1giveme
    @1giveme 4 года назад

    This is not good

    • @HamRadioTV
      @HamRadioTV  4 года назад

      Thanks for the feedback.

  • @youknow457
    @youknow457 4 года назад +1

    What a joke