Why do you not tell people essential information such as adding the gear oil before running the engine. Quite extraordinary that you don't have any information on any of these essential steps before running the engine :(
This is absolutely the most budget way to get over 12mph, without a doubt. Thank you for all your testing. Gonna upgrade/fiberglass a transom on an Intex Excursion 4, and then put one of these engines to it. Already have a wood floor for it, so it should plane good. It'll be interesting for sure.
I just started breaking mine in today I purchased Lucas marine grease & a grease gun to fill the grease fittings full of marine grease then I popped off the propeller and greased the main shaft & added the gear oil and ran it.. There’s 4 steps to the process (1)I let it run for 10 minutes in neutral at 1000rpm (2)Then I put it in forward gear at 25% throttle where the notch is on the handle and arrow meet.. (3)I plan on finish breaking the motor in on the water for the next two hours of the break in period at variable speeds not exceeding 50% throttle the next warm day I get outside.
I have used one of these same outboard motors on my 25ft McGregor sailboat .. It worked great during the time I was able to take my sailboat out and looking at getting a 12hp so I can use the 6hp for my dingy
I've got about 25 hours on mine after 1 season in salt water. No issues so far, other than having to mess with the pilot air screw and idle screw a little bit.
Nice. So far that is all that we've really had to do on one of the motors. Both have only been in freshwater, but hope to get some saltwater action in here soon.
i bought the 2 stroke last year but only use it 2 times about 1 hour of use. I had a problem with mine cut off and wouldn't start back up for about 3 weeks of trying to start but it wasn't getting any fuel to the caburetor so i remove that switch thingy on the side and replace it with a conventional squeeze primer now it works great just 3 to 5 squeeze of the priming ball and she starts right up after 3 to 5 pull
I tested my 12HP HangKai the first time a few day ago and I was able to plane and reach 18Mph with 2 people (full 6 gallon tank and 370lb of us) I still need to work on trimming it right and I will prob add a hydrofoil to plane faster. I'm using high quality Oil Quicksilver Synthetic Blend, used Quicksilver transmission Oil and common 87 octane gas. Just have 2 hours on mine and requires 10 hours break in. I payed $1300 Greetings from the San Francisco
Quick question for you, did they send you a certificate of origin? Did you need it at your place? Here in NJ it's a requirement in order to register it. I'll appreciate if you can let me know. thanks!
Absolutely. For the break in we went a step further and only used the pre-mix from Lowe's. They've got some cheap plastic, but I think if we take care of 'em they'll last for a good while. Thanks for watching and enjoy that year round boating season in AZ!
Thanks for your video man, i just bought mine today, and when it gets here next friday i plan on making my own video to help the hangkai crowd out. Very informative. Mine is a 6.5 4 stroke
Your water demo sold me on the 6HP performance. Thing moves with one person. I was conflicted on getting the 2 stroke or shelling out a few hundred extra on the 6.5 horse 4 stroke with a Saturn inflatable.
I'd have liked to shell out some more for the 12hp, but I didn't think the 4 stroke 6.5 was was worth it for the extra $$$. The 2 stroke is lighter and more simple!
So i am waiting for my Hankai 6HP. Peobably will be getting on Friday 26th July 2024. I have a 3m vshaped air deck boat. Let's see how it performs. I will be uploading videos soon. i go into the water.
These are Tohatsu M5BDS clones. Parts are interchangeable. The 12 is a 9.8 2 stroke M9.8B is that model. The 18 is, yep you guessed it a 15hp Tohatsu M15B.
@@Poorandprepared the 3.6hp are 2hp Clones. There is something lost in translation between KW rating they use and HP rating we use. So the 3.6hp model is 55cc. A Yamaha 2 stroke at 50cc is 2hp. If you think Hangkai can make more power than. Yamaha with 5cc extra... Well, that should explain it. The Aiqidi T3.5 outboard is 61cc and it's a clone of the Mercury t2..5 and it's less money with water cooling. So... As they said in the 70's. There is no replacement for displacement. The Hangkai 4hp, boats2go, is a clone of the Tohatsu T3.3. A 3.3hp unit. The 6 is a clone of the 5. The 18 is a clone of the 15. And none of the clones make near the same power as their parent. But... Are they worth it... Well that's up to you to decide really. IMO though don't bother with the 3.6. I've seen a dozen and a 55lb trolling motor makes the same power.
@@ollllllloHTX The red one is a 10 FT and the grey/white one is 10.8 FT. With the 6 HP and only one person we can get up to about 12 - 13 MPH. If you'd like to know more about the boats, check out one of our follow up video where we go more in depth about the dinghies: ruclips.net/video/-_FUVxI1fnU/видео.html
I bought this new 6hp Hangkai on ebay & put it on 11.8 ft inflatable boat. I used it in Texas City bay and the police stop me and told me to get a registration for it. When I applied for the registration, They asked me to have a bill of sale or an invoice signed by the seller. I emailed the seller but no response. Can't not use it and the summer is almost over.
Hey y’all, mine is 3 years old with maybe 10 hours on a John boat. Problems starting today. Took out the spark plug and it’s wet from water in there! What part is failing to keep water from entering the cylinder!? I’m a boat noob. I ran compressed air in the cylinder and it blows out the propeller if that helps.
What are the differences between a 2 and 4 stroke besides mixing oil and gas and why would you choose one over the other? Thanks for your great information.
Without getting into too much detail about how they each work, the 2 stroke is lighter (and more simple) and can generally get more power out of a smaller engine. The 4 stroke is quieter and more efficient, but heavier and needs oil changes like a car would. In many countries you can no longer get new 2 strokes because of emissions. Given the choice a 4 stroke is usually the preferred option nowadays, but they both have their pros and cons.
I’m looking at getting the 6hp outboard but I’m concerned with getting parts for it. Have you had to order parts and be able to get them? Also the foot grease is it like mercury and Yamaha where u have the fill plug and drain plug? I heard the throttle doesn’t engage till you are pretty far tuned on the handle. Also is there a tilt lock to keep the water fully out of the water when drafting in shallow water?
We had to order a new foot for one because FedEx damaged it, but we got it sent from China from the Amazon seller. We also ordered a prop with a different pitch from eBay which also came from China. For most of the parts, 2 stroke Tohatsu or Mercury 6hp parts should be a direct fit. Foot grease is the same. You can buy the pump at Walmart it uses the same fitting as a Honda or Yamaha. The throttle engages as soon as you pull the handle. It is very responsive. It has a tilt lock with two positions.
@@HufflerGarage is there a locking position where you can tilt the motor all the way up out of the water? Like if you’re beaching your boat or skiff and want it completely up.
Do they come with gear oil because mine came in and i ran a couple hours didn't even check if had gear oil manufacturing manual said nothing on adding gear oil.
Hi. Great vid. Liking the channel only just discovered u. I'm waiting for my 15hp 2 stroke Hankai and was wondering how u get the correct service parts for it. I understand they r same as mercury/tohatsu? How do u make sure u get the right year model etc? Many thanks hope this helps others on your channel. Keep it up...
I'm pretty sure its the same as a Mercury/Tohatsu 4/5hp and they didn't really change the 2 stroke too much over the years so that will normally pull up the right stuff. When we needed a replacement lower unit because FedEx broke the skeg off one of the motors, we contacted the seller and he had one shipped directly from China. I don't have the manual with me right now, but I believe it has a list of part numbers for maintenance parts. We've had these motors for about a year now and haven't had to replace anything yet (aside from the lower unit that was damaged).
We have had an issue with the neutral safety switch on the pull start. Check out our video on how we fixed it: ruclips.net/video/d7AjVLiwb08/видео.html
Wonder if any hangkai owner can help me here. I felt my tickover was too high after about 10 hours running in and decided to lower it. What a plonker I adjusted the wrong screw. I think I adjusted the air mixture screw. Now I need some idea where it should be set as per factory setting. Know I need to screw in till it stops then screw back out a set amount. Anyone able to help with a figure. 1.5 turns? 2 turns?. Tia.
@@HufflerGarage. Thanks. I will give it a try. Been a fantastic engine upto yet, can't quite get my 4.1m boat on plane but neither can a 6hp yam. Have to settle for 7mph half throttle.
Both of them came from Amazon. The seller we got them from no longer carries them, but we only picked that seller because they were the cheapest. ($585).
Which vendor on Amazon did you buy this from? There are several but I don't know who is reliable. I enjoy your videos as well, they are very informative 👍
I just checked and it looks like the vendor we got ours from is no longer in business. That's a shame because they were really good and even sent us replacement parts for free when one of them was damaged by FedEx. If you're nervous about Amazon, check on eBay. There are some for sales that have sellers that are rated "Top-Rated Plus." eBay Feedback usually seems a bit more trustworthy than Amazon reviews. Thanks for watching and stay tuned for more!
Make sure you are getting both spark and fuel. After the break in period on mine, I had to readjust the carburetor because it would run poorly and shut off and then not start. I replaced the spark plug too, but didn't really need to.
They are 2 stroke. The 4 stroke version is a 6.5 hp so it could be a little faster,. The 2 strokes are lighter and have a built in fuel tank so we chose them over the 4 stroke model.
Hooky moves and not wearing life jacket. That water appears to be less than 40 degrees. Not a lot of time before hypothermia if he falls out of boat doing that maneuvering. No one plans on the disasters. They happen when you don't expect them.
A four stroke blowing all that oil smoke during a cold start is not a good sign. I think I would rather drop a few extra hundred for Suzuki 6 hp four stroke.
It should run fine, just make sure to put a fuel treatment in if you're going to let it sit for a while. Most pump gas here is E10 and we've had to use it in situations when E0 was unavailable. No issues.
Hey there, I am considering getting their smaller 3.5 horse power engine to use on a small 10’ Jon boat. Is it the same 8 hour break in or is the break in less time, thanks!
You have to go through the new engine break in process. It really just involves mixing more oil in and varying your throttle input. Once we got through the break-in on both motors we had to adjust the carburetor air mixture and now they both run fine. It seems like most of the bad reviews are on the smaller, cheaper engines. I'm sure there are some lemon Hangkai motors, but we've had these for almost a year and run the hell out of them every chance we get. So far, so good. We will probably make a 12 month update video in August.
Hello @Huffler Garage! Can you please tell me what is the difference between 5HP and 6HP engines. As far as I found they have same cubic capacity and different Output Power 3.7KW and 4.4KW. But what is producing this output difference? Thank you
@@dinucostin7541 Salut, nu detin eu asa ceva. Am un unchi care are asa ceva, si tot cautam impreuna care este diferenta dintre ele, si din cateva alte filmulete, se pare ca este doar o schema de marketing, si ca de fapt, motoarele sunt identice.
I'm seriously thinking about getting a 6 horsepower. Do you really really think they are worth the money. I think Amazon is asking 659 for a two-stroke
I thought it was worth it just to get something new. Most of the used outboards in the same price range were 30+ years old and we didn't want to deal with someone else's problem. The Hangkai 6 hp is a decent little portable motor to putz around with.
Nope. I have a Tomking TK144FC four cycle air cooled. It starts super easy. It's quiet. Jellyfish and algae can't clog it's cooling. It's economical. It has pure oil in the crankcase. Two cycle engines are a big mistake.
Yes, they have forward, neutral, and revers. We bought these off of Amazon last year for US$670 after tax and shipping, although I believe the price may have gone up since then.
That's about what we have all in between the motors and the dinghies. If you're planning on running in the ocean, I'd recommend bumping up to at least the 12hp Hangkai.
We have changed the prop on one and installed a hydrofoil on the other and have been comparing the results over the past couple months. We've had these motors a bit over a year now so a 1 year update video is coming soon.
Do you know what kind of paperwork is required for registration? (MSO maybe?) I don't recall it coming with any paperwork other than the manuals and inspection certificate, but I can take a look next time I'm at the lake.
Take the 6.0 sticker off. Get some sticker material and put a 4.0 on it or, or, or, order some replacement décals. Get the manufacture cubic engine size and convert it, they are most likely léss than 5 so you wouldnt be being dishonest.
I was originally going to buy a 3.5 because of the price; but after doing some more research, it definitely seemed worth it to pay the extra for the 6.
Thanks for your video man, i just bought mine today, and when it gets here next friday i plan on making my own video to help the hangkai crowd out. Very informative. Mine is a 6.5 4 stroke
@@HufflerGarage yessir after some "research" ive done, which is hard to do as you know, when i seen you guys toolin around with those little dudes goin as fast lol firing up in the THOSE temp ranges, i knew then if thats their 2 strokes..... Im paying attention now. The parts are interchangeable with mercury tohatsu, half the price LITERALLY of the competition. I got mine for 800 even. Im thinking about making a channel where all of us new owners plus you pioneer guy's can share some insight on these insanely well priced outboards. 6 hp 4 stroke mercury 1475, no stock anywhere
Thank you for always supporting HANGKAI------From HANGKAI MANUFACTORY IN CHINA
Thanks for giving us an affordable and reliable option to get on the water!
We would love to try out some of the larger motors.
I would love one as an upgrade but is it hevay to carry and is it a sort shaft?
Why do you not tell people essential information such as adding the gear oil before running the engine. Quite extraordinary that you don't have any information on any of these essential steps before running the engine :(
@billbogg3857 he does in other videos, but yes it would be nice to have a recap. I'm looking at buying one of these motors. They seem pretty solid.
This is absolutely the most budget way to get over 12mph, without a doubt. Thank you for all your testing. Gonna upgrade/fiberglass a transom on an Intex Excursion 4, and then put one of these engines to it. Already have a wood floor for it, so it should plane good. It'll be interesting for sure.
I just started breaking mine in today I purchased Lucas marine grease & a grease gun to fill the grease fittings full of marine grease then I popped off the propeller and greased the main shaft & added the gear oil and ran it.. There’s 4 steps to the process (1)I let it run for 10 minutes in neutral at 1000rpm (2)Then I put it in forward gear at 25% throttle where the notch is on the handle and arrow meet.. (3)I plan on finish breaking the motor in on the water for the next two hours of the break in period at variable speeds not exceeding 50% throttle the next warm day I get outside.
I have used one of these same outboard motors on my 25ft McGregor sailboat .. It worked great during the time I was able to take my sailboat out and looking at getting a 12hp so I can use the 6hp for my dingy
12hp is probably too much for the MacGregor; some 26ft owners say the 9.9hp is the right size
I've got about 25 hours on mine after 1 season in salt water. No issues so far, other than having to mess with the pilot air screw and idle screw a little bit.
Nice. So far that is all that we've really had to do on one of the motors. Both have only been in freshwater, but hope to get some saltwater action in here soon.
How’s it holding up?
How’s it holding up?
I just bought this outboard. Should be here friday. I hope it runs well and is solid like in all the videos i see.
i bought the 2 stroke last year but only use it 2 times about 1 hour of use. I had a problem with mine cut off and wouldn't start back up for about 3 weeks of trying to start but it wasn't getting any fuel to the caburetor so i remove that switch thingy on the side and replace it with a conventional squeeze primer now it works great just 3 to 5 squeeze of the priming ball and she starts right up after 3 to 5 pull
I tested my 12HP HangKai the first time a few day ago and I was able to plane and reach 18Mph with 2 people (full 6 gallon tank and 370lb of us) I still need to work on trimming it right and I will prob add a hydrofoil to plane faster. I'm using high quality Oil Quicksilver Synthetic Blend, used Quicksilver transmission Oil and common 87 octane gas.
Just have 2 hours on mine and requires 10 hours break in. I payed $1300
Greetings from the San Francisco
I came so close to buying a 12hp last month. Planning on upgrading to either a 12 or 18. The 6hp won't plane with more than 1 person.
Quick question for you, did they send you a certificate of origin? Did you need it at your place? Here in NJ it's a requirement in order to register it. I'll appreciate if you can let me know. thanks!
Hey how is the motor holding up
transmission oil in the gearcase? how many have you gone through?
very wort for money..
I purchased mine last April, I use it all year long. Those are great motors, the key is Ethanol free fuel and sea foam.. Greetings from Arizona!
Absolutely. For the break in we went a step further and only used the pre-mix from Lowe's. They've got some cheap plastic, but I think if we take care of 'em they'll last for a good while. Thanks for watching and enjoy that year round boating season in AZ!
@@HufflerGarage Thanks bro!
Can’t believe anyone would use fuel with Ethanol in these engines.....
@@RONALDB62 exactly
@5:00 im so happy you got both of those Hangkai babies RIPPIN at the same time! Thats what I came here for lol
Thanks for your video man, i just bought mine today, and when it gets here next friday i plan on making my own video to help the hangkai crowd out. Very informative. Mine is a 6.5 4 stroke
Thanks for watching! Looking forward to seeing more 4 stroke videos on here.
@@HufflerGarage so i got my outboard but a few problems, my cowl was cracked and manual was in russian lmao. I got it all fixed now.
@@gladius881 Ho tradotto il manuale in italiano
@@rivivi7002 idk mine came in russian lol, but the ebay sellers gave me one in english on pdf download
That's interesting. I wonder if it depends on where you get it from or just the model. Both of our manuals were in English only.
Your water demo sold me on the 6HP performance. Thing moves with one person. I was conflicted on getting the 2 stroke or shelling out a few hundred extra on the 6.5 horse 4 stroke with a Saturn inflatable.
I'd have liked to shell out some more for the 12hp, but I didn't think the 4 stroke 6.5 was was worth it for the extra $$$. The 2 stroke is lighter and more simple!
Works alright if you take care of it and grease it up to prevent rust.
So i am waiting for my Hankai 6HP. Peobably will be getting on Friday 26th July 2024.
I have a 3m vshaped air deck boat. Let's see how it performs. I will be uploading videos soon. i go into the water.
I am sending this footage to the coast guard
These are Tohatsu M5BDS clones. Parts are interchangeable. The 12 is a 9.8 2 stroke M9.8B is that model. The 18 is, yep you guessed it a 15hp Tohatsu M15B.
Are the 3.6HP worth anything?
@@Poorandprepared the 3.6hp are 2hp Clones. There is something lost in translation between KW rating they use and HP rating we use. So the 3.6hp model is 55cc. A Yamaha 2 stroke at 50cc is 2hp. If you think Hangkai can make more power than. Yamaha with 5cc extra... Well, that should explain it.
The Aiqidi T3.5 outboard is 61cc and it's a clone of the Mercury t2..5 and it's less money with water cooling.
So... As they said in the 70's. There is no replacement for displacement.
The Hangkai 4hp, boats2go, is a clone of the Tohatsu T3.3. A 3.3hp unit. The 6 is a clone of the 5. The 18 is a clone of the 15. And none of the clones make near the same power as their parent.
But... Are they worth it... Well that's up to you to decide really.
IMO though don't bother with the 3.6. I've seen a dozen and a 55lb trolling motor makes the same power.
That's a lot of fun!
I am waiting on my 6 hp 2 stroke just ordered it the other day from Amazon. What is recommended for break in period?
8 hour break in period. Skip to 5:55 and we go over the break in procedure.
Hello and thanks for the video , I bought a used Hangkai 3.5 , do you know where I can get a manual
You can download the manual at www.downloadboatmanuals.com/motors/hangkai/ but it is in Russian.
I'm considering the 18 hp for a small 15' 7" fiberglass skiff. Looks like a great deal.
Me too. Did you buy it yet?
Did you buy it?
If anybody has any questions about the Hangkai outboards or the inflatable boats, don't hesitate to drop a comment and we will reply.
How big are those dinghies and what's the top speed?
@@ollllllloHTX The red one is a 10 FT and the grey/white one is 10.8 FT. With the 6 HP and only one person we can get up to about 12 - 13 MPH.
If you'd like to know more about the boats, check out one of our follow up video where we go more in depth about the dinghies: ruclips.net/video/-_FUVxI1fnU/видео.html
I bought this new 6hp Hangkai on ebay & put it on 11.8 ft inflatable boat. I used it in Texas City bay and the police stop me and told me to get a registration for it. When I applied for the registration, They asked me to have a bill of sale or an invoice signed by the seller. I emailed the seller but no response. Can't not use it and the summer is almost over.
Do you know what the 15 and 18 are clones of. Just want to be sure parts are available and interchangeable before I commit.
Hey y’all, mine is 3 years old with maybe 10 hours on a John boat. Problems starting today. Took out the spark plug and it’s wet from water in there! What part is failing to keep water from entering the cylinder!? I’m a boat noob. I ran compressed air in the cylinder and it blows out the propeller if that helps.
Should mention it’s the 6HP T6 Hangkai
What are the differences between a 2 and 4 stroke besides mixing oil and gas and why would you choose one over the other? Thanks for your great information.
Without getting into too much detail about how they each work, the 2 stroke is lighter (and more simple) and can generally get more power out of a smaller engine. The 4 stroke is quieter and more efficient, but heavier and needs oil changes like a car would. In many countries you can no longer get new 2 strokes because of emissions.
Given the choice a 4 stroke is usually the preferred option nowadays, but they both have their pros and cons.
Those are great engines!
What are the dimensions of the 3 gallon fuel tank that comes with the motor?
The 6.0 does not come with an external fuel tank. We bought some external tanks off eBay. Only the 6.5 and above come with external tanks.
I’m looking at getting the 6hp outboard but I’m concerned with getting parts for it. Have you had to order parts and be able to get them? Also the foot grease is it like mercury and Yamaha where u have the fill plug and drain plug? I heard the throttle doesn’t engage till you are pretty far tuned on the handle. Also is there a tilt lock to keep the water fully out of the water when drafting in shallow water?
We had to order a new foot for one because FedEx damaged it, but we got it sent from China from the Amazon seller. We also ordered a prop with a different pitch from eBay which also came from China. For most of the parts, 2 stroke Tohatsu or Mercury 6hp parts should be a direct fit.
Foot grease is the same. You can buy the pump at Walmart it uses the same fitting as a Honda or Yamaha.
The throttle engages as soon as you pull the handle. It is very responsive.
It has a tilt lock with two positions.
@@HufflerGarage is there a locking position where you can tilt the motor all the way up out of the water? Like if you’re beaching your boat or skiff and want it completely up.
Do they come with gear oil because mine came in and i ran a couple hours didn't even check if had gear oil manufacturing manual said nothing on adding gear oil.
Hi. Great vid. Liking the channel only just discovered u. I'm waiting for my 15hp 2 stroke Hankai and was wondering how u get the correct service parts for it. I understand they r same as mercury/tohatsu? How do u make sure u get the right year model etc? Many thanks hope this helps others on your channel. Keep it up...
I'm pretty sure its the same as a Mercury/Tohatsu 4/5hp and they didn't really change the 2 stroke too much over the years so that will normally pull up the right stuff.
When we needed a replacement lower unit because FedEx broke the skeg off one of the motors, we contacted the seller and he had one shipped directly from China. I don't have the manual with me right now, but I believe it has a list of part numbers for maintenance parts.
We've had these motors for about a year now and haven't had to replace anything yet (aside from the lower unit that was damaged).
I've noticed on several videos on this motor that the pull start/crank gives way. Have you had a problems with the pull start failing?
We have had an issue with the neutral safety switch on the pull start. Check out our video on how we fixed it: ruclips.net/video/d7AjVLiwb08/видео.html
Wonder if any hangkai owner can help me here. I felt my tickover was too high after about 10 hours running in and decided to lower it.
What a plonker I adjusted the wrong screw. I think I adjusted the air mixture screw.
Now I need some idea where it should be set as per factory setting.
Know I need to screw in till it stops then screw back out a set amount. Anyone able to help with a figure. 1.5 turns? 2 turns?. Tia.
Factory setting on the Hangkai 6 should be 1.25 turns.
@@HufflerGarage. Thanks. I will give it a try. Been a fantastic engine upto yet, can't quite get my 4.1m boat on plane but neither can a 6hp yam. Have to settle for 7mph half throttle.
Where did you purchase them from? So many options on Ebay so don't want to select a bad seller.
Both of them came from Amazon. The seller we got them from no longer carries them, but we only picked that seller because they were the cheapest. ($585).
Which vendor on Amazon did you buy this from? There are several but I don't know who is reliable. I enjoy your videos as well, they are very informative 👍
I just checked and it looks like the vendor we got ours from is no longer in business. That's a shame because they were really good and even sent us replacement parts for free when one of them was damaged by FedEx.
If you're nervous about Amazon, check on eBay. There are some for sales that have sellers that are rated "Top-Rated Plus." eBay Feedback usually seems a bit more trustworthy than Amazon reviews.
Thanks for watching and stay tuned for more!
Could you please tell if I can install a cable steer kit on this hangkai outboard ? Thanks.
Yes, you should be able to use either a universal kit or a Tohatsu kit.
In my 10 foot Jon boat with me my trolling motor and battery up front I can get 17 and with someone with me I can get15
That's awesome. We wish we still had a jon boat to test these on.
Do these outboards take (TC-W3 2 stroke Marine Oil?) Blue dye. OR what do you recommend?
Yes....marine 2 cycle is the trick. Walmart supertech is good.
smog like crazy no pass in Californian
What is the size of the boat? How u adjust the carb?
My friend, better 2 stroke or 4 stroke
Is clint eastwood the pres. of this company--remember HANG EN kai ????---L O L
my engine hangkai 6hp,wont start..why,anyone can help me
Make sure you are getting both spark and fuel. After the break in period on mine, I had to readjust the carburetor because it would run poorly and shut off and then not start. I replaced the spark plug too, but didn't really need to.
Tighten the pilot air screw all the way down, and then back it out 2.5 turns. You're welcome!!!
Im good
Are those 2stroke? If so are they faster than the 4 stroke versions? Thanks for the great video
They are 2 stroke. The 4 stroke version is a 6.5 hp so it could be a little faster,. The 2 strokes are lighter and have a built in fuel tank so we chose them over the 4 stroke model.
Hooky moves and not wearing life jacket. That water appears to be less than 40 degrees. Not a lot of time before hypothermia if he falls out of boat doing that maneuvering. No one plans on the disasters. They happen when you don't expect them.
A four stroke blowing all that oil smoke during a cold start is not a good sign. I think I would rather drop a few extra hundred for Suzuki 6 hp four stroke.
These are 2 stroke engines.
Hi the UK has changed petrol to E10. Please may I ask in your opinion will it run ok? Thank you in advance
It should run fine, just make sure to put a fuel treatment in if you're going to let it sit for a while.
Most pump gas here is E10 and we've had to use it in situations when E0 was unavailable. No issues.
@@HufflerGarage thank you, I think I am going to get this engine. Thank you again... Geoff
Hey there, I am considering getting their smaller 3.5 horse power engine to use on a small 10’ Jon boat. Is it the same 8 hour break in or is the break in less time, thanks!
I believe the break in on the 3.5 is 5 hours, but I would recommend to double check the owners manual just to make sure.
Hi I have Reed so many bad reviews could you confirm it’s down to not going through the new engine process? Looks like a Hidea 5hp I had.
You have to go through the new engine break in process. It really just involves mixing more oil in and varying your throttle input. Once we got through the break-in on both motors we had to adjust the carburetor air mixture and now they both run fine.
It seems like most of the bad reviews are on the smaller, cheaper engines. I'm sure there are some lemon Hangkai motors, but we've had these for almost a year and run the hell out of them every chance we get. So far, so good. We will probably make a 12 month update video in August.
Hello @Huffler Garage! Can you please tell me what is the difference between 5HP and 6HP engines. As far as I found they have same cubic capacity and different Output Power 3.7KW and 4.4KW. But what is producing this output difference? Thank you
I believe the only difference is the carburetor. The 6 hp carb allows for more fuel and higher RPM.
salut Florin, ti-ai luat un asemenea motor? Vreau sa cumpar si eu ceva de 5hp si tot fac cautari. Multumesc.
@@dinucostin7541 Salut, nu detin eu asa ceva. Am un unchi care are asa ceva, si tot cautam impreuna care este diferenta dintre ele, si din cateva alte filmulete, se pare ca este doar o schema de marketing, si ca de fapt, motoarele sunt identice.
@@florindinu8111 Sa inteleg ca unchiul este multumit de motorul hangkai? ati verificat, are aceeasi structura? decibeli? Multumesc.
Do you know where I can get a fuel filter for this?
I have the 6.5 4 stroke
Do you this 6HP would push a 14/36 aluminum boat?
It'll definitely push it along. How fast depends on the boat.
No kill-switch?
Are these single cylinder or twin?
single cylinder for the 6HP. The 12 and 18hp have two cylinders.
Yes. The 6 HP is a single cylinder and the 12 and 18 are twin.
Where can you buy parts for these engines?
eBay and Amazon has a decent selection of parts. Some Mercury and Tohatsu parts will fit on as well.
@@HufflerGarage i think most of mercury parts would fit this motor.
Do you have any experience with the 18hp?
No, but we really want to get our hands on one. We might get a 12 hp one this summer, but the 18 is outside of our budget for now.
I'm seriously thinking about getting a 6 horsepower. Do you really really think they are worth the money. I think Amazon is asking 659 for a two-stroke
I thought it was worth it just to get something new. Most of the used outboards in the same price range were 30+ years old and we didn't want to deal with someone else's problem.
The Hangkai 6 hp is a decent little portable motor to putz around with.
@@HufflerGarage right...... Not so concerned with speed as I am with it cranking up and getting me bk to the ramp.
Nope. I have a Tomking TK144FC four cycle air cooled. It starts super easy. It's quiet. Jellyfish and algae can't clog it's cooling. It's economical. It has pure oil in the crankcase. Two cycle engines are a big mistake.
Still going strong almost 4 years later even after running in saltwater.
does the engine dont have extra fuel tank
It doesn't come with one, but it does have a connector so you cant hook up an extra tank.
Roscoe from Detroit where can I purchase that engine
eBay or Amazon
Do these motors have reverse? Where did you purchase these?
Yes, they have forward, neutral, and revers. We bought these off of Amazon last year for US$670 after tax and shipping, although I believe the price may have gone up since then.
Dude it’ll cost me 1600 for a salt water rated coast guard raft and this engine Brand new boat you can store in a box don’t get a boat get a raft👍
That's about what we have all in between the motors and the dinghies.
If you're planning on running in the ocean, I'd recommend bumping up to at least the 12hp Hangkai.
Are they still working good?
Yes. It's been over a year since we bought them and they are still running strong.
Have you run them in the ocean yet?
Yes! Check out our ICW & Ocean video: ruclips.net/video/MYjTed1UeXM/видео.html
Are they short shaft motors?
Yes they are short shaft (40cm / 15.75 in.).
@@HufflerGarage Thank You!
Loss of power with extra weight indicates you have the wrong prop for the setup
We have changed the prop on one and installed a hydrofoil on the other and have been comparing the results over the past couple months. We've had these motors a bit over a year now so a 1 year update video is coming soon.
1 cylinder or 2 ?
1 cylinder
@@HufflerGarage thank you
Do they come with titles and paperwork to register and title . In SC any outboard over 5 hp has to be registered
Do you know what kind of paperwork is required for registration? (MSO maybe?) I don't recall it coming with any paperwork other than the manuals and inspection certificate, but I can take a look next time I'm at the lake.
No they dont. These are clones. Not even officially registered outboard company.
Take the 6.0 sticker off. Get some sticker material and put a 4.0 on it or, or, or, order some replacement décals. Get the manufacture cubic engine size and convert it, they are most likely léss than 5 so you wouldnt be being dishonest.
PRICE IS WHAT ???????
We got them off Amazon for about $600 USD. It looks like they're going for around $700 now.
I would love it to see him lose control
why are you revving these up to the moon in neutral? are you not aware of how reed valves function?
The reeds deserve strict punishment.
There’s no way I would be out on the water depending on a motor like that
Wee took these out into the ocean and had no issues.
The 3.5 Hangkai is a lot of SHIT, I heve one, so I know, Do Not Get One, South Wales UK.
I was originally going to buy a 3.5 because of the price; but after doing some more research, it definitely seemed worth it to pay the extra for the 6.
Thanks for your video man, i just bought mine today, and when it gets here next friday i plan on making my own video to help the hangkai crowd out. Very informative. Mine is a 6.5 4 stroke
Can't wait to see it! There aren't enough Hangkai videos. I'd like to see some more of the 4 strokes.
@@HufflerGarage yessir after some "research" ive done, which is hard to do as you know, when i seen you guys toolin around with those little dudes goin as fast lol firing up in the THOSE temp ranges, i knew then if thats their 2 strokes..... Im paying attention now. The parts are interchangeable with mercury tohatsu, half the price LITERALLY of the competition. I got mine for 800 even. Im thinking about making a channel where all of us new owners plus you pioneer guy's can share some insight on these insanely well priced outboards. 6 hp 4 stroke mercury 1475, no stock anywhere