@@geekytwins is there any performance difference between Airtel router (Zyxel) and Tp-link XPON onu? one more question, since you are using two devices (onu and router), is it a single NAT network or dual NAT network?
@rishi_raj_01 it's an established fact that the ONTs provided by ISPs, be it Zyxel, Nokia, or Sercomm, offer little to no customization as they are locked af and have poor routing performance as well, apart from other flaws such as inability to handle lots of clients simultaneously. Not to mention, lack of WiFi 6 support. We help folks overcome all these issue by using their own equipment. Now to answer your question, we have to replace the Airtel ONT with two devices as you can see in the video, the XPON terminal and a router, and I can attest that there has been a world of difference between my experience after taking the Airtel ONT out of the equation. The pings are more stable, WiFi range has improved, the Bufferbloat rating is always A now, QoS is also available and so on. To answer the question about NAT, well, this XPON terminal is merely a media converter, which converts optical to electronic signals, all the routing is done by Archer AX53, so there's no possibility of double NAT.
The ONU that I'm using has one of the best laser accuracy. And it comes with a high performing ZTE CPU. But because of that the average temp stays at 55°C which stays fixed unless I use a cooling fan on it. I heard this could be bad for long time usages as the CPU could degrade considering lots of ONU avg temp stays within 30°C like CDATA XPON goes below 20° C. Then there's this G7 from TP-Link with over 60°C avg temp. What's your opinion on this?
CDATA XPON ONU goes below 20°C? Bro, where are you from? Arctic circle? 😅😂 Also, CPUs are built to withstand high temperature so as long as you are within their operating temps, it shouldn't matter. What ONU are you using?
@@AnupomAG I take it that you are from Bangladesh! I'm glad to know that we have international viewers are well, thanks a lot bro! Also, can you share some screenshots of your ONU webUI on India Broadband Forum? I'm sure people would be really interested in those. I also saw a video on this ONU and I saw that it has a proper laser module🤩🤩
I'm planning to change my router/modem (hybrid) that the ISP gave me. With this GPON terminal, I wanted to know what changes I would see after using it. Will there be more stability or less ping compared to the ISP router/modem (hybrid)? What are the main advantages of doing this? Can you please help me out with this? I don't know much about the technicalities, as I am very new to this.
Hello brdr, welcome to our channel! And yes, the stability of your home network would increase as well as the capacity of your network to support more clients as well since the ISP provided combo device isn't powerful enough. Next up, ISP won't be able to peep into your home network to see which devices are connected and which are not. Last but not the least, you'll get additional features like VPN etc. and more control over your home network in terms of DNS, static DHCP leases etc. if you decide to buy a more powerful router for use with this GPON terminal.
@@SunburnX Bro ping ka issue solve krna hai toh prefer connecting 5GHz band on devices jo support krte hain iss band ko. Agar ping kuch zyada hi high aa rhi hai toh you can reach out to Airtel kyonki backend me koi issue ho skta hai.
What exactly do you mean by TR069 enabled router? One of the reasons for this custom setup is to get rid of TR069, as it can be used by airtel to peep into our networks.
my serial number started with ALCL so assuming that my router is not supported its same as the nokia router but does not have nokia branding and i cannot also unlock the router had purchased the G7 hoping that can connect but while dialing up the ppoe connection it does not connect with the username and password? do you have any workaround for this?
Hello brdr, if you mean that will we have to connect separate LAN cables to router port 1 and 4 (in our case) to use VoIP and internet, then you'd be right, but you'd then also need two LAN ports in your laptop or computer. Otherwise, only one thing will be able to work at a time as is the case with our setup since we only have a single LAN port in our laptop.
@@geekytwins thanks alot for the answer.I just wanted to access webui of ONU without plugging in Lan cable into the laptop can you make separate video on that?
Bro, ye xpon ONU mein DHCP server disable rakhna hein na setup ke samay ?? Kya external router se iska admin page open kar sakta hei ?? Pls reply dijiye
Brdr, it doesn't matter whether you keep DHCP on XPON terminal enabled or disabled. Secondly, external router se access krne ke liye you need to get a router which lets you create multiple profiles on the same hardware interface. For example OpenWRT, etc. Otherwise it's not possible.
Hi is the diffrence in performance when vlan is set in ONu vs When Vlan is set in the router and transparent mode in ONU any performance difference or something?
Although the XPON terminal will have to work just a little bit harder if VLAN is set in it, there shouldn't be any noticeable real-life impact, since it is quite a capable device. If you still have some reservations, just set it in your router/PC.
@@nicksajs Brdr, unfortunately there's no way to do that if you are not using a OpenWRT router or any router which allows creation of multiple WAN profiles.
@@geekytwins Can you please provide details for how to do setup with JioFiber? I have already converted my office Airtel Xstream using this video, hoping to do the same with my home connection of JioFiber
@@geekytwins i just asked them, they'll get back to me. Also my "guy" at airtel said i could be becuse im using an XPON...instead of a GPON terminal. Is that Possible? Im using the XZ000-G7
@@MaDAdiii That's quite unlikely, brdr. Many folks are happily using XPON terminals, not only of TP-Link, but other brands as well. Also did you get to know your OLT?
Hello brother, Airtel usually doesn't do MAC binding but maybe in your region, it does, not sure. Where are you from? Also, please double check the credentials you've used. Sometimes, airtel changes the password if you get the connection converted from prepaid to postpaid or vice versa.
@@geekytwinsYes brother, I have changed from prepaid to postpaid for static ip but even feeding the static ip in the router doesn’t give me any authentication from backend, PADI/PADT errors all the time. I’m from maharashtra circle. The WAN profile in nokia ont for DynamicIP is some placeholder (newuser@airtelbroadband) so I guess the password and username is also changed. I’m thinking of filing a consumer complaint as suggested by another prosumer.
Awesome video bro….Keep it up! I have this one query. Did you simply unplug the gpon from airtel’s router and connected that to the tp link xpon? I understand you’d require ont sn number and stuff but won’t airtel hinder you if you completely get rid of their router+modem combo device?
Yes bro, I simply unplug the GPON connection from Airtel’s router and connect it to the XPON terminal. And no, there would be no hinderance from Airtel. The only problem that would arise would be that you'd no longer be able to use the Airtel Thanks app for configuring your WiFi etc. since TR-069 is unavailable in this setup. TR-069 is anyway being used to invade privacy of our local network so it's better that it's off.
Thanks for the Video. My setup with XZ000-G7 is not working. GPON SN copied, VLAN Setup, but net not connecting. Airtel provided Dasan router where OLT type is ALU. what maybe the issue ?
Brother, I don't have access to Excitel broadband but I can tell you that you'll have to clone your Excitel ONT's WAN MAC to your router to make it work, along with the GPON SN.
First of all thanks for the video @geekytwins I have tried with Tata Play Fiber but I am not able to get it working I have copied device id to ont Then archer c50 entered vlan in iptv entries And in wan put pppoe with user name and password from ponwan settings of Tata play fiber Thanks again
I’m trying to configure for my Airtel Xstream. ONT - GNXS XPON - TP Link XZ000-G7 Router - TP Link Archer C6 I configured the SN and VLAN in XPON, PPPoE in Router. But still not able to connect to Internet, PoN is blinking with amber led only for sometime. Registration Status is O5 Anything else I’m missing ? Is vendor tag in XPoN or MAC is required for Airtel Xstream ? Location Hyderbad
Brdr, it's possible that the OLT in your area is ALCL. Does your genexis ONT show OLT info? Also, amber led points to an incorrect insertion of the Fiber connector.
Yes, it'll blink but it'll be green only and I was talking about the OLT, not the ONT. If OLT is ALCL, then G7 doesn't work. Check with your local technician about the OLT brand.
I'm using this Xpon terminal with my BSNL overall a good product, just wanted to know what's you view with Airtel is it better than company provided ONT
This setup is miles ahead of the Airtel-provided ONT. The flexibility and the performance are the biggest pros. So, I definitely recommend taking this route to anyone looking to up their home networking game.
@@geekytwins I was having a concern that this terminal Radiates too much heat is it normal. I' have paired this with TPLink C80 router and running very good compared to other routers like syrotech.
@@somaanathmu3950 Bro, for BSNL, you have to get in touch with the Local Technician, he'll do MAC binding of your new router in the OLT and then it'll work.
@@viveksahu_me Heating is not going to affect the performance much since these things are built ot operate over a wide range of temperatures. Also, can you list the steps you used to get it working with BSNL, so others can benefit as well?
Hello! I recent got a TPLINK XC220-G3V router. I copied the GPON ID from the airtel router and successfully registered it. Now when I try to use the airtel credentials for internet. I could not connect at all. I even cloned the MAC of the airtel router, still I cannot connect to internet. What could be the issue? I would be delighted if you could share a video on how to configure airtel xstream with Tplink XC220-G3V
Hello sir, it's an issue of ALCL OLT being used in your locality. Please talk to your local technician and confirm. Unfortunately, TP-Link XZ000-G7 won't work in this case.
@@saptarshibarat Hello bro, TP-Link XZ000-G3 v1 would work. I have a video on that too, on my channel:ruclips.net/video/sHhJeCCXqJk/видео.htmlsi=NkzmtKGhzIyqTX6_ Will try to bring out the setup video ASAP.
Sir maine apke jaisa same setup kiya hai tp link onu, tp link wifi 6 router aur airtel xstream fiber ke sath lekin mera jo landphone hai usse mein kaise connect karun apne router ke sath jisme sirf RJ 45 port hai RJ 11 port nai hai...@@geekytwins
@@DebankurMandal-y6z Hello brother, WiFi 6 router me landline nahi connect hoga, agar aapko VoIP use krna hai toh computer me static IP set krke hi ho payega, Zoiper ya kisi aur softphone app se. Ya phir aapko IP Phone lena pdega.
I've to setup physical landline for my parents. So, I was thinking to order Yealink Sip T31P IP Phone but to setup this ip phone, should I copy the credentials from the VOIP section of Airtel ONT or there is some other method to configure this ip phone with my tp link wifi 6 router running on airtel xstream fiber@@geekytwins
Yes, bro, it's also possible in JioFiber. You just have to purchase a TP-Link XZ000-G3 v1 in Jio's case. I was also using this setup with my JioFiber connection till last year.
hello..one query..how to access this xpon gui after configuring it with router..I have not changed xpon gateway from 192.168.1.1 and my router gateway is 192.168.1.2 but still not able to access.
Sir, that's not possible in this TP-Link router or any other router which doesn't allow you to create multiple WAN profiles on the same physical interface.
Hi, I need help in setting it up. My setup XZ000-G7 and Airtel provided me Sercomm AOT-4221 Router with most of config disabled by airtel and I don’t have static ip and I have done all steps as explained but not working for me…what’s the issue? Please help me
Bro, GPON SN ko iss device me copy kro and check if railtel uses MAC binding. If yes, then clone WAN MAC of your ONT in your router, otherwise only GPON SN is enough.
Humlo brdr, this is an issue which several people have faced. I'd recommend you get bridge mode enabled on your ONT, if G7 isn't working and sell your G7 or return it.
What about MAC binding in the Airtel fiber account. ? Airtel not tagging MAC address of the ONU with the customer account ? Secondly i could see that you set bridge mode connection and set VLAN , USER & PASSWORD in the laptop. Mac address of your Laptop matches with the MAC of airtel ONU ?
@@geekytwins Why don't you try Bridge mode in the XPON terminal and use PPPoe in your TP Link router so than you can get the extra performance in all of your devices connected in the Router..
@@geekytwins You set Bridge in XPON terminal and Dialed from the PC. Here internet only established in PC. But if you Dial from High speed Router in the Wall you can establish same high speed internet and connect all your devices to it.
@Navjot, I have recently got the tplink onu. TAGGED and ran pppoe on my Asus GT AC5300 and its working. Just upset because GT Ac5300 is premium gaming router with no vlan tag feature. I have couple of raspberrypi4 laying will try openwrt for the whole setup. Great video it helped a lot ❤
Really glad to have helped, brother. Asus GT AC5300 is quite expensive, so I'm really surprised at the lack of the VLAN feature🤯. And OpenWRT is going to be super customizable, so that's indeed the way to go, good luck!
@@geekytwins VLAN features are not available in "Asus GT AC5300". However its predecessor "Asus RT AC5300" has such features and also supports Merlin-WRT. Recently, I have installed Openwrt on RPI-4 and works. Currently achieving (download 480Mbps and upload 240) on 200Mbps plan.
Not able to connect to pppoe using this, I have put the gpon sn in this and the registration status is O5, also put the vlan to tag mode and set vlan to 100...still I am not ahle to connect to pppoe, have verified the username password with the settings in Dasan and it is correct :'(
Hello bro 1. yes, we can use Airtel router as ONU if we enable bridge mode on it. 2. TP-Link is the best and the most reliable ONU in this price range.
Hello sir, i also have airtel xstream fibre and have recently bought tplink ax 1500 router, can you help me how i can setup and cofigure the new router? I want to replace the airtel router.... I will buy xpon terminal also if required but i really need your help with the configuration ... Please help 🙏
Bro i think airtel has increased security we cant just use any routers. Bro maybe we should clone serial number and mac address for this to work. Bro and can you please show port forwarding is working and is it behind CGNAT. can you confirm this.
Lol brdr, no security has been increased by Airtel, who is spreading these rumors? And slap whosoever tells you that Airtel uses MAC Binding. If your internet doesn't work after you get your own ONT and replicate all the settings, that's always because of incompatibility between the ONT and the OLT.
Most of the routers provided by them are of low performance. Heavy users like me suffers a lot with speed and performance. I've a bandwidth of 1Gbps but the router provided by them cannot handle the data transmission of my devices at a time. Most of the time I had issues while multitasking and heavy workload. So, I've replaced the router provided by them with a better router like TP link Archer AXE95 which provides MU-MIMO support and OFDMA with WIFI 6E and this solved by issue.
@@DebankurMandal-y6z Even I am using Airtel Xtreme Fibre 1Gbps plan, I am planning to use my own router with this XPON media converter. If you are using the same media converter can you tell me how is the speed with this? Are you getting better speed after using your own router?
pochna ye ta k apk cell wifi py kitni ping ati cable 5 ping arhe or itni achi latency arhe 1 video is set ki bna k dekha dty cell 7 ni tu bhai wsy bta dn ????
Brother @ivanderwei7504, I'm sorry to hear that! The good thing is you can also do the set up if you have an ethernet dongle that connects to your mobile.
Bhaiya maine apki sari videos dekh li nokia ont wali pR please thoda samjhaya toh karo ki yeh sab setting se kya faida hoga?? Kyu krna h kya better hoga? Meko kuch samjh nahi aaya.... Or dusrs maine apka video dekh ke nokia ONT unlock toh kar diya par meko ab usko Jio fibre ke sath repeater ke jaise use kRna ka. Woh kaise kr sakta hu please bataiye.... Bhut kripa hogi warma kuch contact number de diya😅😅
You have to connect APC type laser connector instead of UPC. Otherwise Rx power will be higher like you have now. It goes down up to -18 dbm if you use APC connector.
Btw what's the type of your fiber connector feral?
This ONU is compatible with APC feral.
It's APC only.
does this setup provide dual-stack ipv6?
@rishi_raj_01 Yes pal, it certainly provides dual-stack IPv6. The PPPoE session is shared between IPv4 and IPv6 and it all works fine.
@@geekytwins is there any performance difference between Airtel router (Zyxel) and Tp-link XPON onu?
one more question, since you are using two devices (onu and router), is it a single NAT network or dual NAT network?
Yes , is there any difference?
@rishi_raj_01 it's an established fact that the ONTs provided by ISPs, be it Zyxel, Nokia, or Sercomm, offer little to no customization as they are locked af and have poor routing performance as well, apart from other flaws such as inability to handle lots of clients simultaneously. Not to mention, lack of WiFi 6 support.
We help folks overcome all these issue by using their own equipment.
Now to answer your question, we have to replace the Airtel ONT with two devices as you can see in the video, the XPON terminal and a router, and I can attest that there has been a world of difference between my experience after taking the Airtel ONT out of the equation. The pings are more stable, WiFi range has improved, the Bufferbloat rating is always A now, QoS is also available and so on.
To answer the question about NAT, well, this XPON terminal is merely a media converter, which converts optical to electronic signals, all the routing is done by Archer AX53, so there's no possibility of double NAT.
The ONU that I'm using has one of the best laser accuracy. And it comes with a high performing ZTE CPU.
But because of that the average temp stays at 55°C which stays fixed unless I use a cooling fan on it.
I heard this could be bad for long time usages as the CPU could degrade considering lots of ONU avg temp stays within 30°C like
CDATA XPON goes below 20° C.
Then there's this G7 from TP-Link with over 60°C avg temp.
What's your opinion on this?
CDATA XPON ONU goes below 20°C? Bro, where are you from? Arctic circle? 😅😂
Also, CPUs are built to withstand high temperature so as long as you are within their operating temps, it shouldn't matter.
What ONU are you using?
@@geekytwins It does. I've seen 23 . On average the temp stays below 30.
My ONU model is ABC XPON E20 ONU
@@AnupomAG I take it that you are from Bangladesh! I'm glad to know that we have international viewers are well, thanks a lot bro!
Also, can you share some screenshots of your ONU webUI on India Broadband Forum? I'm sure people would be really interested in those.
I also saw a video on this ONU and I saw that it has a proper laser module🤩🤩
I'm planning to change my router/modem (hybrid) that the ISP gave me. With this GPON terminal, I wanted to know what changes I would see after using it. Will there be more stability or less ping compared to the ISP router/modem (hybrid)? What are the main advantages of doing this? Can you please help me out with this? I don't know much about the technicalities, as I am very new to this.
Hello brdr, welcome to our channel!
And yes, the stability of your home network would increase as well as the capacity of your network to support more clients as well since the ISP provided combo device isn't powerful enough.
Next up, ISP won't be able to peep into your home network to see which devices are connected and which are not.
Last but not the least, you'll get additional features like VPN etc. and more control over your home network in terms of DNS, static DHCP leases etc. if you decide to buy a more powerful router for use with this GPON terminal.
And please use our affiliate link for your purchases!
9:53 DSL number has written _mh at the end. So we need to include that with DSL number for the username?
Yes bro, the complete DSL number needs to be included.
mere pas ZTE F670LV9.0 hai, isko improve kr skte hai kya? dusra router nhi le skta
@SunburnX bro improvement krni hai toh ONT ghar ke beecho beech lgao, har side me range aayegi.
@@geekytwins ghar to chota hai to range me dikkat nhi aati.. bas ping high rehta hai
@@SunburnX Bro ping ka issue solve krna hai toh prefer connecting 5GHz band on devices jo support krte hain iss band ko.
Agar ping kuch zyada hi high aa rhi hai toh you can reach out to Airtel kyonki backend me koi issue ho skta hai.
Bro what about tr069 router can we do this .....there wont be any problem right ....
TR069 is used for Airtel to peep into our networks, do disable that ASAP.
From what I know this ONU is best compatible with APC patch cord .
I think the dB loss would be lot less if you switch to APC .
Bro I'm using green APC connector only😭
Bro will it work for tr069 configured router ?
What exactly do you mean by TR069 enabled router? One of the reasons for this custom setup is to get rid of TR069, as it can be used by airtel to peep into our networks.
my serial number started with ALCL so assuming that my router is not supported its same as the nokia router but does not have nokia branding and i cannot also unlock the router
had purchased the G7 hoping that can connect but while dialing up the ppoe connection it does not connect with the username and password? do you have any workaround for this?
Hello brdr, you'll have to get bridge mode activated from the back-end in this case.
Thanks bhai for uploading this . Was waiting for this.❤❤ Keep making more videos
Many more to come, pal! Keep supporting our content!🤩
Setting up Vlan from router requires 2 Lan Cables?
Hello brdr, if you mean that will we have to connect separate LAN cables to router port 1 and 4 (in our case) to use VoIP and internet, then you'd be right, but you'd then also need two LAN ports in your laptop or computer. Otherwise, only one thing will be able to work at a time as is the case with our setup since we only have a single LAN port in our laptop.
@@geekytwins thanks alot for the answer.I just wanted to access webui of ONU without plugging in Lan cable into the laptop can you make separate video on that?
@@nicksajs Hello brdr, yes, I'm experimenting on finding an easier way to do that. Will make a video if successful.
Bro, ye xpon ONU mein DHCP server disable rakhna hein na setup ke samay ?? Kya external router se iska admin page open kar sakta hei ?? Pls reply dijiye
Brdr, it doesn't matter whether you keep DHCP on XPON terminal enabled or disabled.
Secondly, external router se access krne ke liye you need to get a router which lets you create multiple profiles on the same hardware interface. For example OpenWRT, etc.
Otherwise it's not possible.
@@geekytwins Thanks Bro
Hi is the diffrence in performance when vlan is set in ONu vs When Vlan is set in the router and transparent mode in ONU any performance difference or something?
Although the XPON terminal will have to work just a little bit harder if VLAN is set in it, there shouldn't be any noticeable real-life impact, since it is quite a capable device.
If you still have some reservations, just set it in your router/PC.
@@geekytwins thanks a lot for the info.Also how can i acess Onu wirelessly i have to do wired currently
@@nicksajs Brdr, unfortunately there's no way to do that if you are not using a OpenWRT router or any router which allows creation of multiple WAN profiles.
Can you try xz000-g7 with jio fiber ?
@rajbir.singh. XZ000-G7 doesn't work with Jio Fiber.
@@geekytwins is there any reason why it doesn’t work with jio ?
@rajbir.singh. brother, it's a firmware issue. XZ000-G3 v1 works flawlessly with JioFiber.
@@geekytwins Can you please provide details for how to do setup with JioFiber?
I have already converted my office Airtel Xstream using this video, hoping to do the same with my home connection of JioFiber
This available in upc (blue) or not
Nope
As i am from assam can i connect my airtel fiber connection with tp link onu with tp link router the same way you did ?
Yes, you can! Just check what's the OLT being used in your area.
Agar OLT ALCL type ho to any solution bro @@geekytwins
@@geekytwinsand if OLT is ALCL Airtel router ko onu jaise use karne Sai bridge mode Mai kya farak ayega bro please reply
Bro if OLT is ALCL than what to do if i do my airtel router in bridge mode and work as an onu is their any disadvantages please reply
If OLT is ALCL, then ask Airtel CC to activate bridge mode on the ONT, it's essentially what G7 does as well.
And no cons, only pros.
I am getting 05 registered and some upstream data but no downstream data. WHat could be the problem?
That's interesting! It could be due to some VLAN translation issue between the OLT and the ONT.
What's the make of your OLT? Please check with your local technician.
@@geekytwins i just asked them, they'll get back to me. Also my "guy" at airtel said i could be becuse im using an XPON...instead of a GPON terminal. Is that Possible? Im using the XZ000-G7
@@MaDAdiii That's quite unlikely, brdr. Many folks are happily using XPON terminals, not only of TP-Link, but other brands as well. Also did you get to know your OLT?
Sirji, I followed the steps and it still did not function. Might it be an issue of mac-binding?
Hello brother, Airtel usually doesn't do MAC binding but maybe in your region, it does, not sure.
Where are you from?
Also, please double check the credentials you've used. Sometimes, airtel changes the password if you get the connection converted from prepaid to postpaid or vice versa.
@@geekytwinsYes brother, I have changed from prepaid to postpaid for static ip but even feeding the static ip in the router doesn’t give me any authentication from backend, PADI/PADT errors all the time. I’m from maharashtra circle. The WAN profile in nokia ont for DynamicIP is some placeholder (newuser@airtelbroadband) so I guess the password and username is also changed. I’m thinking of filing a consumer complaint as suggested by another prosumer.
Yes, please do that and be sure to listen to that prosumer's advice very carefully.
tplink xc220 g3v is gpon compatible na. anybody used it with airtel fibre
According to this review on Amazon: amzn.eu/d/5LjFtts, it should work with Airtel Xstream as well.
And it's XPON so should work with both EPON as well as GPON
Awesome video bro….Keep it up! I have this one query. Did you simply unplug the gpon from airtel’s router and connected that to the tp link xpon? I understand you’d require ont sn number and stuff but won’t airtel hinder you if you completely get rid of their router+modem combo device?
Yes bro, I simply unplug the GPON connection from Airtel’s router and connect it to the XPON terminal.
And no, there would be no hinderance from Airtel. The only problem that would arise would be that you'd no longer be able to use the Airtel Thanks app for configuring your WiFi etc. since TR-069 is unavailable in this setup.
TR-069 is anyway being used to invade privacy of our local network so it's better that it's off.
Hello bro in Vlan if we set priority from 0 to 1 what difference will it make ?
Not sure, try and share the findings with us, brdr
Thanks for the Video. My setup with XZ000-G7 is not working. GPON SN copied, VLAN Setup, but net not connecting. Airtel provided Dasan router where OLT type is ALU. what maybe the issue ?
The issue is you OLT. G7 doesn't work with ALCL/ALU OLTs, so try getting something like a G3v1.
sir ye bsnl fiber pe chal sakta hai kya
Yes, it should work, you'll have to clone the MAC address you see in your bsnl portal to your router.
Can you please upload a video of seeting up VoIP too?
In a day or two, sir! It's in the editing stage. @abirdey2011
can you please provide method to setup using excitel
Brother, I don't have access to Excitel broadband but I can tell you that you'll have to clone your Excitel ONT's WAN MAC to your router to make it work, along with the GPON SN.
Great video bro! Was wondering would this process work with Tata Play Fiber too with the XZ000-G7 Thanks for your help.
It would certainly work, brdr! TPF only uses GPON SN authentication, just like Airtel.
@@geekytwins Much appreciated and great work on the video for a novice like me. Thanks again 😃
First of all thanks for the video @geekytwins
I have tried with Tata Play Fiber but I am not able to get it working
I have copied device id to ont
Then archer c50 entered vlan in iptv entries
And in wan put pppoe with user name and password from ponwan settings of Tata play fiber
Thanks again
Brdr, get in touch with me on Discord.
I’m trying to configure for my Airtel Xstream.
ONT - GNXS
XPON - TP Link XZ000-G7
Router - TP Link Archer C6
I configured the SN and VLAN in XPON, PPPoE in Router. But still not able to connect to Internet, PoN is blinking with amber led only for sometime.
Registration Status is O5
Anything else I’m missing ? Is vendor tag in XPoN or MAC is required for Airtel Xstream ? Location Hyderbad
Brdr, it's possible that the OLT in your area is ALCL. Does your genexis ONT show OLT info?
Also, amber led points to an incorrect insertion of the Fiber connector.
@@geekytwins Airtel in our area is using GNXS, I got it from the serial number of Airtel Xstream Router.
@@geekytwins will it show green even if the authentication fails ?
Yes, it'll blink but it'll be green only and I was talking about the OLT, not the ONT.
If OLT is ALCL, then G7 doesn't work. Check with your local technician about the OLT brand.
If Airtel xstreme is OLT is ALCL, Which modem will work then?
I'm using this Xpon terminal with my BSNL overall a good product, just wanted to know what's you view with Airtel is it better than company provided ONT
This setup is miles ahead of the Airtel-provided ONT. The flexibility and the performance are the biggest pros.
So, I definitely recommend taking this route to anyone looking to up their home networking game.
@@geekytwins I was having a concern that this terminal Radiates too much heat is it normal. I' have paired this with TPLink C80 router and running very good compared to other routers like syrotech.
Bro can you help me to setup with bsnl ffth? I am unable to connect to internet
@@somaanathmu3950 Bro, for BSNL, you have to get in touch with the Local Technician, he'll do MAC binding of your new router in the OLT and then it'll work.
@@viveksahu_me Heating is not going to affect the performance much since these things are built ot operate over a wide range of temperatures.
Also, can you list the steps you used to get it working with BSNL, so others can benefit as well?
Only video which helps.
There! You said it brdr 🙏
Hello! I recent got a TPLINK XC220-G3V router. I copied the GPON ID from the airtel router and successfully registered it. Now when I try to use the airtel credentials for internet. I could not connect at all. I even cloned the MAC of the airtel router, still I cannot connect to internet. What could be the issue? I would be delighted if you could share a video on how to configure airtel xstream with Tplink XC220-G3V
Brdr, you need to specify the VLAN ID as well!
@@geekytwins I did add the VLAN, just forgot to mention. I think third party routers are restricted
Nope, nothing like that, it seems like a compatibility issue. Ping me on discord.
mera genexix router bridge mode me hai, wo work nhi kr rha es setup me. bridge mode off krawa dunga to kam krega kya?
Hello sir, it's an issue of ALCL OLT being used in your locality. Please talk to your local technician and confirm.
Unfortunately, TP-Link XZ000-G7 won't work in this case.
@@geekytwins OLT agar Nokia ka hoga then Tplink ka koi bhi XPON ONU/ONT support nehi krega ?
@@saptarshibarat Hello bro, TP-Link XZ000-G3 v1 would work. I have a video on that too, on my channel:ruclips.net/video/sHhJeCCXqJk/видео.htmlsi=NkzmtKGhzIyqTX6_
Will try to bring out the setup video ASAP.
Can you give the configuration for the ZTE modem from airtel? tried all ways on the internet, but nothing worked.
What configuration are you talking about, brdr?
Sir VOIP ka full setup bata dijiye
Hello bro, bohut hi jldi aane vaali hai voh video bhi, dw.
Just keep supporting our channel!
Sir maine apke jaisa same setup kiya hai tp link onu, tp link wifi 6 router aur airtel xstream fiber ke sath lekin mera jo landphone hai usse mein kaise connect karun apne router ke sath jisme sirf RJ 45 port hai RJ 11 port nai hai...@@geekytwins
@@DebankurMandal-y6z Hello brother, WiFi 6 router me landline nahi connect hoga, agar aapko VoIP use krna hai toh computer me static IP set krke hi ho payega, Zoiper ya kisi aur softphone app se. Ya phir aapko IP Phone lena pdega.
I've to setup physical landline for my parents. So, I was thinking to order Yealink Sip T31P IP Phone but to setup this ip phone, should I copy the credentials from the VOIP section of Airtel ONT or there is some other method to configure this ip phone with my tp link wifi 6 router running on airtel xstream fiber@@geekytwins
@@DebankurMandal-y6z That's the exact method you'll have to follow, brother! Video for the setup of VoIP on computer will be out in a day or two.
Can I do this in jio fiber? please reply🙏
Yes, bro, it's also possible in JioFiber.
You just have to purchase a TP-Link XZ000-G3 v1 in Jio's case.
I was also using this setup with my JioFiber connection till last year.
hello..one query..how to access this xpon gui after configuring it with router..I have not changed xpon gateway from 192.168.1.1 and my router gateway is 192.168.1.2 but still not able to access.
Sir, that's not possible in this TP-Link router or any other router which doesn't allow you to create multiple WAN profiles on the same physical interface.
Hi, I need help in setting it up. My setup XZ000-G7 and Airtel provided me Sercomm AOT-4221 Router with most of config disabled by airtel and I don’t have static ip and I have done all steps as explained but not working for me…what’s the issue? Please help me
Ping me on Discord!
Hi bro, Is this device support railwire broadband i dont know how to configure can you help me?
Bro, GPON SN ko iss device me copy kro and check if railtel uses MAC binding. If yes, then clone WAN MAC of your ONT in your router, otherwise only GPON SN is enough.
gaming k lye ye set kaisa ping latency lag wgra tu ni ata plz rply same yhe system lgana ma ny phr ?????bro jo bhtr ho wo idea dna ???
Hello brdr, latency in BGMI is 20 ms with Airtel Xstream and this setup, so it's just perfect!!!
I am having issue with the TP-XZ000-G7 XPON where the device turns off its LAN port when you enter the correct S/N and connect the Optic Fiber.
Humlo brdr, this is an issue which several people have faced. I'd recommend you get bridge mode enabled on your ONT, if G7 isn't working and sell your G7 or return it.
What about MAC binding in the Airtel fiber account. ? Airtel not tagging MAC address of the ONU with the customer account ?
Secondly i could see that you set bridge mode connection and set VLAN , USER & PASSWORD in the laptop. Mac address of your Laptop matches with the MAC of airtel ONU ?
Airtel doesn't use MAC binding so only setting the correct GPON SN in the XPON terminal & VLAN in either the XPON terminal or the computer is enough.
@@geekytwins Why don't you try Bridge mode in the XPON terminal and use PPPoe in your TP Link router so than you can get the extra performance in all of your devices connected in the Router..
@@MS-ff9qo Bro, what else am I doing in the video?
@@geekytwins You set Bridge in XPON terminal and Dialed from the PC. Here internet only established in PC. But if you Dial from High speed Router in the Wall you can establish same high speed internet and connect all your devices to it.
@@MS-ff9qo brdr, please watch the full video lol
@Navjot, I have recently got the tplink onu. TAGGED and ran pppoe on my Asus GT AC5300 and its working. Just upset because GT Ac5300 is premium gaming router with no vlan tag feature. I have couple of raspberrypi4 laying will try openwrt for the whole setup.
Great video it helped a lot ❤
Really glad to have helped, brother. Asus GT AC5300 is quite expensive, so I'm really surprised at the lack of the VLAN feature🤯.
And OpenWRT is going to be super customizable, so that's indeed the way to go, good luck!
@@geekytwins VLAN features are not available in "Asus GT AC5300". However its predecessor "Asus RT AC5300" has such features and also supports Merlin-WRT. Recently, I have installed Openwrt on RPI-4 and works. Currently achieving (download 480Mbps and upload 240) on 200Mbps plan.
@@pritamdebnath0903 That's absolutely brilliant, bro!
Not able to connect to pppoe using this, I have put the gpon sn in this and the registration status is O5, also put the vlan to tag mode and set vlan to 100...still I am not ahle to connect to pppoe, have verified the username password with the settings in Dasan and it is correct :'(
Check with your local technician what's the brand of the OLT.
If it's ALCL, then you won't be able to make it work with this ONU.
1)Can we use Airtel Router as ONU is it possible?
2) TP link is best ONu or any other better one in this price range?
Hello bro
1. yes, we can use Airtel router as ONU if we enable bridge mode on it.
2. TP-Link is the best and the most reliable ONU in this price range.
Can you explain how to get the GPON serial number?
It's normally written on the back of the ONT given by Airtel Xstream.
Hello sir, i also have airtel xstream fibre and have recently bought tplink ax 1500 router, can you help me how i can setup and cofigure the new router? I want to replace the airtel router.... I will buy xpon terminal also if required but i really need your help with the configuration ... Please help 🙏
Humlo brdr, all possible help will be provided to you by us!
Bro i think airtel has increased security we cant just use any routers. Bro maybe we should clone serial number and mac address for this to work. Bro and can you please show port forwarding is working and is it behind CGNAT. can you confirm this.
Lol brdr, no security has been increased by Airtel, who is spreading these rumors? And slap whosoever tells you that Airtel uses MAC Binding.
If your internet doesn't work after you get your own ONT and replicate all the settings, that's always because of incompatibility between the ONT and the OLT.
Whats the use of this? I didn’t get , airtel already providing routers
Most of the routers provided by them are of low performance. Heavy users like me suffers a lot with speed and performance. I've a bandwidth of 1Gbps but the router provided by them cannot handle the data transmission of my devices at a time. Most of the time I had issues while multitasking and heavy workload. So, I've replaced the router provided by them with a better router like TP link Archer AXE95 which provides MU-MIMO support and OFDMA with WIFI 6E and this solved by issue.
@@DebankurMandal-y6z Thanks brother for summarizing it perfectly!
@@DebankurMandal-y6z Even I am using Airtel Xtreme Fibre 1Gbps plan, I am planning to use my own router with this XPON media converter. If you are using the same media converter can you tell me how is the speed with this? Are you getting better speed after using your own router?
Bro,
Can you please show this setup with Jio fiber?
Thanks,
Bro, I don't have JioFiber connection with me, but I'll make a video as soon as it is available in my society.
Amazing work bro, thank you so much
Glad to hear it brdr.
❤❤Can i use it with Railwire Broadband? Plz reply Sir ❤❤
Yes, it should be possible bro!
I think it's not possible
@@soumyasami Hello brdr, how can you say so?
@@geekytwins i tried it didn't work
PON light didn't turned on
@@soumyasami Then it's possibly and issue of the ferrule being different. What color is your optical termination ferrule? Blue or Green?
Bro abhi new Airtel fiver ka password kya hai ppoe ka 6 digital ka hai but hide hai
Lol those * symbols are just place holders, password is still the account number, brdr.
Great video ❤
Anybody who has successfully configured this modem in Keralavision broadband, pls mention the steps..
pochna ye ta k apk cell wifi py kitni ping ati cable 5 ping arhe or itni achi latency arhe 1 video is set ki bna k dekha dty cell 7 ni tu bhai wsy bta dn ????
Brdr, next video hum issi pe layenge dont worry
9jot bhai.
Keep supporting, birader!🥳
Please pura wiring ka setup bhi kaise karna ye bhi batao
It's very straightforward, just connect ethernet port on the G7 to the WAN port of the router, after setting up the G7.
Bro ont Mai ho gaya but tp link ka router login nahi ho raha ax53 Mai
Ping me on discord, brdr.
I dont know how to setup i have no computer
Brother @ivanderwei7504, I'm sorry to hear that! The good thing is you can also do the set up if you have an ethernet dongle that connects to your mobile.
Hi..bro can u make video on how to set custom MTU for router best and easy way 💥⭐
Sure, will try to make a video on all the settings available in Archer AX53.
G7 is not connecting to internaet even when entering the correct username and password and vlan id 100
Haillo brdr, you possibly have an ALCL OLT, that’s the reason. You’ll have to get something like a XZ000-G3 v1 to use with it.
Ping me on discord.
Bhaiya maine apki sari videos dekh li nokia ont wali pR please thoda samjhaya toh karo ki yeh sab setting se kya faida hoga?? Kyu krna h kya better hoga? Meko kuch samjh nahi aaya.... Or dusrs maine apka video dekh ke nokia ONT unlock toh kar diya par meko ab usko Jio fibre ke sath repeater ke jaise use kRna ka. Woh kaise kr sakta hu please bataiye.... Bhut kripa hogi warma kuch contact number de diya😅😅
Use this video to convert Nokia to a repeater: ruclips.net/video/zOBqZPepQs4/видео.htmlsi=tgDQOCy51IxtRZUd
Join discord, no contact number.
How to configure with bsnl ftth😢😢
Very simple, clone the GPON SN in XZ000-G7 and clone the the WAN MAC to your router and then do the rest of the settings in your router.
airtel wale blacklist to nhi kr denge na?
No chance! I've been using this setup since August last year!
Mere pass same device hai but configure nahi hota hai
please make a video on jio
Will try to bring that video as well. Currently, I don't have Jio at my place of residence.
Mere pass bhe same device hai
Yes, brdr, please tell me and refrain from spamming.
Sas to lelo paaji 😂😂😂😂
Hi sir mughe help chI
Tell me what help you need and please try to put everything in a single comment.
Voip not working
What's the error you're getting, bro?
thanks bro
You're welcome bro! Keep supporting our channel!
You have to connect APC type laser connector instead of UPC. Otherwise Rx power will be higher like you have now. It goes down up to -18 dbm if you use APC connector.
Brother, I think you need to brush up your fiber connector basics. Green is APC only, while blue is UPC.
@navjot_singh Please help me to configure this device. The method in this video not working. I have GTPL network at my home. Please 🙏🏻
What issue are you facing, sir? Is it solved by now?
Not yet Sir. By this way I can't configure this with GTPL fiber internet. Please solve the issue if you can Sir. 🙏🏻
@@MMVTrade Sure, we can try, get in touch with me on discord.