TP-Link XZ000-G3 GPON Terminal - Hardware & Web-UI Overview
HTML-код
- Опубликовано: 17 июл 2024
- XZ000-G3 is a 1-Port Gigabit GPON Terminal from TP-Link. The product has been around since 2022 and becomes popular in 2023 since some ISPs are using it in bridge mode and allow customers to use their own router to for the internet connection.
In this video, let's take a look at the XZ000-G3 ONT connectors and the Web Interface features.
Interface: 1 x Gigabit Ethernet port (RJ45), 1 x SC/APC Port (Fiber)
Data Rate: Upstream: 1.244Gbps, Downstream: 2.488Gbps
VLAN Mode: 802.1Q tag VLAN, VLAN transparent mode/VLAN translation mode/VLAN trunk mode, Authentication based on SN and Password, VLAN Auto Detect
Security: AES Encryption, Packet Filter based on VLAN
More detail can be found at service-provider.tp-link.com/...
Video timeframe:
00:00 - TP-Link XZ000-G3 Hardware Overview
01:58 - Connect Fiber cable & Power on
03:49 - Access the XZ000-G3 Web UI & Feature Overview
06:25 - GPON Configuration (GPON Password & GPON Serial Number)
06:55 - VLAN Mode Configuration
10:18 - Should I tear it down?
That will be all for this video. Thanks for watching and see you soon! 
Наука
Hi, I just wanted to say Thank you and I appreciate the time you take out of your life to make these videos. I have been following along with your beginner tutorial on OpenWRT. I am currently using a Banana pi R1, but my Banana pi R3 is going to here by the end of the month.
ISP here, we have been using them for a few months now and everything ok, just one that randomly died just a couple days after been installed, we have them paired with a TP-Link DeltaStream Pizza-Box and it just works fine haha, all yours videos are very good, keep the good work, greetings from Venezuela.
Just wonder do you have an access to fw updates? Because they are not public and Reserved to ISP only
Hey Gabrielgful, thank you for the information. I've just take a look at this DS-P7001-08 few day ago and want to give it a try ...However this should be out of my budget at the momment (for demonstration purpose only).
I am also an isp since 1998. Switched to pon system back in 2014 , it was really hard to find anything for pon back then. We had huwaei & vsol systems only. Cisco was way too expensive for us.
One thing i am not liking about this tplink onu is that it can not be used as a router. , I have other cheaper ones made with huawei chips & they have pppoe login or static ip routing option. & Even dual lan ports. These are very useful for customers who do not want to use a wireless router so instead of logging in from their windows pc everytime, we just login their pppoe on the onu & they plug their pc anytime they want to use the internet. Or if they get a wifi router they can just set it to access point mode and plug it into the onu.
The one i use has dual lan port , 1 gigabit & 1 fast ethernet (100m). The telephone jack is of no use as i don't provide voip.
And these cheap 10$ onu's actually run at full gigabit throughput! I don't offer more than 1gbps package and barely any buy that package as it is 100$ a month. Most popular package i sell is the 8$ a month package which gives customer's 100mbps to play with. There are few using 300 & 500mbps packages.
I have one customer who does stock tradeing & he has taken 3 connections from 3 different isp's & directions , he runs it through a loadbalancing router.
I don't provide anything other than fiber optic since 2020 & fiber optic installation costs 15$.
Thank for sharing.
Bạn cho mình hỏi, mình đã thử reset mà vẫn không log in được. Thiết bị vẫn xài bình thường. Giờ có cách nào ko ?
what is the difference between xz000-g3 ans xz000-g7?
Vnpt để vlan như thế nào b. Có cần nhập slid ko b ơi.
Can you share latest firmware link for V2 ?
isit compatible with SC UPC connector ?
I Ping it ok, but can not open it by web. help me
My ISP - Orange is not allowing to connect my own router and to set ISP modem in bridge mode. Will this ONT allow me to get rid of ISP modem and connect the cable directly to SC/APC port and then to my own router? Or I need to configure it somehow and ISP needs to provide some information? Thanks.
Bonjour, from some comments on this forum, it looks like the Nokia G-010S-A is working as a replacement of your ISP modem. Maybe you can give a try lafibre.info/remplacer-livebox/guide-de-connexion-fibre-directement-sur-un-routeur-voire-meme-en-2gbps/msg886426/#msg886426
You are allowed to replace access point but forbiden to replace modem
Not sure if I missed it: what is the power consumption of the xz000-g3?
2.6W with fiber cable & ethernet cable connected.
thanks for showing up web ui configuration bro, that custom vlan tag make me want to try :) because that how i success bridge my ont to get connected with pppoe protocol on openwrt....but yeah i dont know yet if isp look something like mac address/etc of device that connected to fiber port.
Usually, I prefer to handle the VLAN on my router since it is much more stronger compare to the ONT (gpon bridge mode in this case). Also, when it is working in VLAN transparent mode, I can access to all VLANs on my OpenWRT router and use them for my own purposes (PPPoE/IPTV).
@@VanTechCorner hello, I want confirming finally after saving I can buy and try this devices on my isp Indihome ( Indonesia ISP) and It works as expected, I only need vlan tag ; you can use scan vlan features to know waht vlan useb by your olt; ( for now I use ont vlan because my openwrt router just archer c7 v5 so I don't want to eat more resources on router side) and Set GPON SN with ZTEG in hexadecimal + the serial number after ZTEG. thank u for your content. cheers
@@fauzanmuharram4202Hello, Im also using Indihome ZTE modem here, Im a bit curious on how you can get the PLOAM or GPON Password?
@@ariasultan You can backup your configuration from zte indihome modem to usb drive and you will get one file (I forgot what the extention name is) after that you have to open it with routerpassview then you will get your ppoe account.
@@fauzanmuharram4202 Ok I already done that, I've got my PPPoE account and password. What I need to know is my GPON SN(ZTEGxxx) and GPON Password(this is what I need to know)
I heard some ISP use mac id to lock pppoe authentication. if this onu does not have mac id cloning then it is not useful, I think.
cái này là vỏ kim loại phỏng?
Xz000-g3 Terminal Red Óptica Gpon Gigabit, 1 Puerto, Tplink es compatible con el Router Tp link Ax1500 ARCHER AX10
my ont have 12 serial number will work with this ont? or i need 16 serial number? 6:36
See this video, where I convert 12 digits Serial Number to 16 digits ruclips.net/video/H8aTjxx3ff4/видео.html
@@VanTechCorner ont XZ000-G3 has hidden sn change function by default? and need special firmware?
Can I use bridge mode with this modem?
+1
@@SeLvDoR.yes or no?
anh ơi gpon password là mình tự tạo hay được cung cấp vậy ạ, cách lấy gpon sn như nào vậy ạ
và em cần đổi mac khi dùng thiết bị này ko ạ
em dùng nhà mạng fpt ạ
Nếu không rành về GPON / Bridge mode và quay PPPoE thì em có thể tìm hiểu thêm trước khi làm theo các chỉ dẫn của anh. TP-Link XZ000-G3 được FPT lắp cho khách hàng nếu có yêu cầu (tùy trường hợp, yêu cầu đã có router tự trang bị). Trường hợp em đang được trang bị thiết bị khác (đang chạy ở bridge mode kết hợp với router khác để quay pppoe), em có thể tự mua con xz000-g3 về thay thế cho route nhà mạng.
Can we change mac address on this?
At the momment, it is not possible.
@@VanTechCorner i have faith in you you will figure that out in coming days😀😀
Let teardown plz
It's pretty easy, only 9 latches and secret useful uart port inside ;)
@truonggiahy Yes, I will do that in the next video
dùng cho viettel dc k b ?
Mình cũng không rõ, nhưng chưa thấy ai dùng nó với Viettel. Khả năng cao là không được đâu bạn.
con này này nó có 2 phiên bản là V2 và ISP. các hàng tại vn bán đa số ISP bên nhà mạng còn v2 chắc quốc tế ko rành lắm
@@truonggiahyp0 mình nghĩ có tag vlan là ok chứ, thấy có v3 rồi
@@VanTechCornerMình có dùng con này với mạng Viettel được nhé. Modem gốc là ZTE, copy đúng S/N là được.
If your ISP checks mac address this device is absolutely useless, no ssh, no telnet, not even custom firmware can make you change the mac address