Do you think it can be possible to change MAC adress from UART console??? I want to replicate MAC from my ISP ont (also serial number but that is possible from UI)... this is so that ISP cannot know I am using custom ONT and not get blocked My ISP doesn't want customers to use neutral ONT and the ont privided by them is very slow and has failures!
I assume you already get it done. If not, make sure your USB TTL adapter is working, and swap the TX and RX pin if possible (the VCC is disconnected and the board is powered by the DC power)
@@VanTechCorner well, USB TTL adapter is working (I can see it in device manager as com port 6), I change TX and RX pin just as you did in the video but no response inside putty. I'm windows 11 user and my XZ000-g3 version is version 1
Yes he made a mistake because of TP-Link ipaddress?page= from chrome dev. So this one can change it web file and volia it's working.. Can you please share full web_file.htm on this device?
@@Decimoxx Oh that is very sad news 😔 I tired to replied you many times but I couldn't comment you due to RUclips flagged is now automatically removed my comments... I don't understand why is that?
Hey! Could you share with me please the bin file you modded for him? I have the same exact model but cant make the tool to work, of even sharing a guide of how to mod mine, please please!
14:29 sao chép từ /tmp sang máy tính qua fttp . Vậy muốn sao chép ngược lại từ máy tính vào /tmp thì dùng lệnh nào ạ ?
Do you think it can be possible to change MAC adress from UART console???
I want to replicate MAC from my ISP ont (also serial number but that is possible from UI)... this is so that ISP cannot know I am using custom ONT and not get blocked
My ISP doesn't want customers to use neutral ONT and the ont privided by them is very slow and has failures!
I did the teardown and solder process, but after trying to connect on putty I didn't have any response. any tips?
I assume you already get it done. If not, make sure your USB TTL adapter is working, and swap the TX and RX pin if possible (the VCC is disconnected and the board is powered by the DC power)
@@VanTechCorner well, USB TTL adapter is working (I can see it in device manager as com port 6), I change TX and RX pin just as you did in the video but no response inside putty. I'm windows 11 user and my XZ000-g3 version is version 1
Any luck solving the problem?@@C42210
is it possible to change 1g lan to 2.5g lan on chip level ?
I dont think so. I think it comes from hardware transciever not from firmware
@@ZonaALGdone already
How To check what TP Product ID in console? i need do create a firmware for my modem, but i don't now how to find it...dmseg not working...
would you please advice me to buy gpon terminal ont unite that i can writ all my information from Huawei hg8240t5 like SN
Adding hidden pages doesn't work because you've made a typo ;) I will post instructions here tomorrow ;)
Yes he made a mistake because of
TP-Link ipaddress?page= from chrome dev.
So this one can change it web file and volia it's working..
Can you please share full web_file.htm on this device?
@@kunalbhattacharjee4793 Here's a list of all accessible pages. Some of them arent hidden but dont have time to analyse it:
-rwxr-xr-x 1 36587 device_mgmt.htm
-rwxr-xr-x 1 10 empty.htm
-rwxr-xr-x 1 7678 epon_onu_sn.htm
-rw-r--r-- 1 15677 epon_sys.htm
-rw-r--r-- 1 14898 epon_vlan_manage.htm
-rw-r--r-- 1 1866 epon_wan.htm
-rwxr-xr-x 1 2092 factory_set.htm
-rwxr-xr-x 1 32724 gpon_iot_edit.htm
-rwxr-xr-x 1 4901 gpon_onu_sn.htm
-rwxr-xr-x 1 1808 gponctc.htm
-rwxr-xr-x 1 9604 iot_cfg.htm
-rwxr-xr-x 1 6441 lan.htm
-rwxr-xr-x 1 589 onu_debug.htm
-rwxr-xr-x 1 4901 onu_sn.htm
-rwxr-xr-x 1 5169 optic.htm
-rwxr-xr-x 1 1769 restart.htm
-rwxr-xr-x 1 6311 rt_stats.htm
-rwxr-xr-x 1 2104 softup.htm
-rwxr-xr-x 1 3399 sw_status.htm
-rw-r--r-- 1 14524 sys.htm
-rwxr-xr-x 1 2090 tcont.htm
-rwxr-xr-x 1 2724 user.htm
-rw-r--r-- 1 18216 vlan_manage.htm
-rw-r--r-- 1 10416 wan.htm
@@michaobrembski7948 thank you.. 😊
@@kunalbhattacharjee4793 Can you please share me the guide or screenshot ? I still do not get it. Thank you
@@Decimoxx
Oh that is very sad news 😔
I tired to replied you many times but I couldn't comment you due to RUclips flagged is now automatically removed my comments...
I don't understand why is that?
You could do some video about sniffing GPON OMCI packets ;)
I think there is no video about it on YT and this device is capable.
Hey! Could you share with me please the bin file you modded for him? I have the same exact model but cant make the tool to work, of even sharing a guide of how to mod mine, please please!
I could not understand how to get 16 digit hexadecimal number.
Please help
Hi, you can search for "ASCII to Hex converter" on Google.
Bạn làm test WiFi Throughput mấy con wifi 8806 với mấy con nội địa đi
Mình cảm ơn!
it uses fiper single mode
Mình mới đặt cái này. Chạy rất mượt fpt và download không ảnh hưởng iptv.
có cần phải gọi kỹ thuật xuống chỉnh cấu hình không bạn hay gọi tổng đài thôi ạ?
@@thanhphuongme gọi tổng đài cập nhật mac thôi bạn
bạn dặt hàng thiết bị này từ đâu ạ?
@@mentisdominus shopee
mình gọi nhà mạng fpt đổi được không bạn ,hay phải mua mới trên shop
try ?page= 🤣🤣🤣🤣