Nice video. You explained and showed it very well! 👍🏻💪🏻 That's right, the saw sometimes runs (saws wrong). Your sawhorse isn't bad, maybe I'll build something similar. Have a nice week. 🙏🏻
This time, I made the sawhorse for this video. However, many improvements were found during and after it was completed. So I want to remake it. I may post an improved sawhorse making video in the future. Thank you for watching.
What you imagine about the western saw leaving a clean surface is correct. I can get similar results sometimes with my japanese saw if I don't apply as much pressure, but it's slower to cut this way. Long rip cuts with a push saw work best when the board is about the height of your knees. A low bench or sawhorses will resist the cut making the saw more efficient. Cutting a board in the vise makes it flex, so I prefer to have a support to saw against.
Agradeceríamos se você pudesse traduzir legendas em japonês para português usando a função de tradução automática do RUclips. Existem muitos vídeos no youtube que explicam como configurar a tradução automática. Obrigado por assistir.
thx for the info tis very usefull . what is the device you use to clab the wood to and saw on? does it have a certain name? im hoping i can find some plans some where
I think it's probably 'hold fasts'. It is difficult to buy this tool because few people use it in Japan, but it seems that it can be purchased at web shops such as amazon in the West.
hello teacher! I wanted to ask you if you could make a video on how to build, such as the respective measures, the inclined support where you cut the wooden board, thank you.
![Carpenter's Basics] Sawing Practice - Making a Mortise with a Hand Saw](http://i.ytimg.com/vi/Bc3cKucZ4u8/mqdefault.jpg)
That was very helpful, thank you. This cutting stand is just the thing I need to improve my cuts.
Have already made half and have used it twice to cut the other parts. Not finished and it works great.
Nice video.
You explained and showed it very well! 👍🏻💪🏻
That's right, the saw sometimes runs (saws wrong).
Your sawhorse isn't bad, maybe I'll build something similar.
Have a nice week. 🙏🏻
This time, I made the sawhorse for this video. However, many improvements were found during and after it was completed. So I want to remake it. I may post an improved sawhorse making video in the future.
Thank you for watching.
What you imagine about the western saw leaving a clean surface is correct. I can get similar results sometimes with my japanese saw if I don't apply as much pressure, but it's slower to cut this way. Long rip cuts with a push saw work best when the board is about the height of your knees. A low bench or sawhorses will resist the cut making the saw more efficient. Cutting a board in the vise makes it flex, so I prefer to have a support to saw against.
Спасибо! Очень подробно рассказали , как пользоваться этой пилой!
もう世界中に日本のノコギリが普及しちゃったけどワークベンチでは挽きにくいという話をちゃんと説明してくれた。
Caramba!!!! Preciso aprender japonês urgente!!!!!
Nihongo wakaranai !!😭😭😭
😍
Agradeceríamos se você pudesse traduzir legendas em japonês para português usando a função de tradução automática do RUclips.
Existem muitos vídeos no youtube que explicam como configurar a tradução automática.
Obrigado por assistir.
初コメントです。ちょっと目から鱗の動画でした。今まで何も考えず縦挽きしていました。
作業台とてもいいですね。私も作ってみようと思います。
初コメ、ありがとうございます。
私の作業台はまだまだ不完全なので、ハルさんなりに色々進化させてもらえると嬉しいです。
これはわかりやすい！確かに西洋のこではレッグバイスに挟んで押し上げるように切る方がいますね。
海外動画で、押す鋸と引く鋸の違いについて説明している動画を見たことがあります。英語だったので、何を言っているのかよく理解できませんでしたが、たぶん、こんなこと言ってたのかなと想像しつつ説明してみました。
木材の繊維方向を意識すると、鋸の使い方もちょっとうまくなった気がしますね。
いやーよく分かりました。ならいめとさかめもやっていると引っ掛かりの違いがありますわ。
私は曲がるのはノコに反った癖をつけてしまっのかと思っていました。または自分の引く癖や立ち位置もあると思ったり。引く方が手前は確かに方向を調整しやすいですね！
そして！徐ろにまたまた作業台の登場に笑。切り屑で墨線が隠れて吹き飛ばすの繰り返しは効率も悪いし、断面が汚くなっていつも困ってます。これを作るのがやはりFEWさんだと感心しきり。🎉
ありがとうございます。
作業台は事前に綿密な計画なしに作ったので、あとでいろいろ改善点が出てきまして、メイキング動画の投稿をやめました。
今後また、改訂版作業台が徐に登場するかもしれません。
縦挽きのキモはやっぱり気持ち良さですね。
それにしても、縦挽き台、いいですね。
ずっと作りたかった縦挽き台ですが、いざ作ってみたら大きすぎて置き場所に困ってます。
コンパクトなものをもう１台作ろうかと、考え中。
で、さらにものが増えて置き場所が。。。
でも、ある程度大きい方が使い勝手は良さそうだし、、、
スペースの問題は悩ましいですね。
富嶽三十六景で長い材木を縦引きする場面がありますね。やはり斜めに立てかけた材を切っています。
ほんとですね！今ネット検索で確認しました。
斜めにすると腰が楽です。
can you give us a tour of your workshop and show your tools?
Unfortunately, I don't have a workshop. The place I always work in is my house under construction. I will consider introducing my tools.
thx for the info tis very usefull . what is the device you use to clab the wood to and saw on? does it have a certain name? im hoping i can find some plans some where
I think it's probably 'hold fasts'. It is difficult to buy this tool because few people use it in Japan, but it seems that it can be purchased at web shops such as amazon in the West.
hello teacher! I wanted to ask you if you could make a video on how to build, such as the respective measures, the inclined support where you cut the wooden board, thank you.
I can't make a promise, but I may post a video of how to make the inclined support in the future.
Thank you for watching.
@@fareastwood Arigatō, sensei.
👍👍👍👍
🙏🙏🇹🇷
仏の心で切りなさい、自ずと真っ直ぐ切れる。
、、、雑念が！