COLD AIR INTAKE - K&N - Silverado
HTML-код
- Опубликовано: 27 фев 2018
- Is K&N's Cold Air Intake worth the money? Find out here!
2007 - 2014 Chevrolet Silverado
For those of you who know about the +1000 Subs Challenge, watch until the end! THANK YOU FOR YOUR SUPPORT!
Remember to SUBSCRIBE!
Follow me on Instagram: @lonestar_hawaiian
PROFESSIONAL INQUIRIES: LSHawaiian@gmail.com
Music:
Song: Jo Cohen & BW - Glowing At Night [NCS Release]
Music provided by NCS: • Jo Cohen & BQ - Glowin...
Download: ncs.lnk.to/GlowingAtNight
Artists: www. josephcohenmusic + / iambq
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
JPB - High [NCS Release]
• JPB - High | Trap | NC...
JBP
➞ SoundCloud / anis-jay
➞ Facebook / jayprodbeatz
NoCopyrightSounds, We Upload. You Listen.
Free Download: bit.ly/jpb-high
Dreams by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
creativecommons.org/licenses/b...
Music provided by Audio Library • Video 
Авто/Мото
Loved the video man! Stoked that you did go with the Milwaukee power tools I love them! 😍🤙
You have got knowledge and skills man. Thanks for sharing.
Went with a volant cold air and it drop power and mpg went down called they said they needed to tune went with air aid short pipe stock box mpg went up and power went up good luck keep it up buddy
I have a 2006 with the CAI and 18" magnaflow true dual catback exhaust at the 45 degree angle tips.
Absolute increase in performance especially with magnaflows straight through design.
Hello. I too have an extended cab (2010). I want my level it as well. Would you say for a perfect level you would need a 3.5” ? What about 3”. And did you leave the back stock?
Another awesome video, great work.
I love my Milwaukee tools you will too
Great Job on the Channel keep it up
If you wanna add a little more low end torque, I added an AirRaid Throttle body spacer with my K&N Cold Air Intake. Also adds a nice whistle to your engine. they complement each other very well in my opinion.
Thanks bro
I just purchased this system for my 2010. I already have a dual side exit split tip flowmaster series 10 system in it. I removed my mag a flow system and I’m glad I did it sounds way more powerful. As far as engine bay cleaning idk what he uses but I like purple degreaser
can you leave a link to the exact K&N cold air intake please?
LoneStar Hawaiian im a ford man but love your truck looks super clean and nice, i have a 08 f150 extended cab and with my wife and kids it gets a bit small so i recently just bought a truck tool box for space saving when we are all together and i gotta say i dont how i went so long without one, its been awesome so far. just thought with your wife and kid you might be interested in one also. keep up with the good videos man
You really have good content, and better commentary!
I have a 2014 lifted Silverado I get 16.7 mpg with 35 inch tires also has a borla exhaust awesome sound but my question is a aftermarket air intake worth the time and money any help would be greatly appreciated
I just bought a K&N kit for my 2014 Chevy Tahoe. What do you use to keep the engine bay so clean? Nice video!!!
Can I put this on a 2018 1500 chevy? Or would it mess up my engine and warranty
Beautiful truck i have a 2012 silverdo ls extended cab. The only mode i made to hit was a flowmaster 40 series with dumped pipes sounds mean. I like the wheels but i saw your previous video about the leveling kit and it looks dangerous.
I have a question after installing k&n did you have trouble keeping the track on because when install mine I have to give it a little gas for it to stay on and I have a 2015 GMC Sierra any idea what would it be
2012 rcsb fbo, complete exhaust, caltracs, a few more.. super fun truck. Low miles clean title
curious, what CAI and exhaust combo would you suggest for a 2016 Sierra 1500 with a 5.3L? Thanks in advance!
What transmission does your truck have, 4l60 or the 6l80?
Should I buy a 2008 Silverado for 6500 aftermarket wheels and tires but says it needs a tune up and has a small oil leak and a big kicker. Has 256k
Is there an exhaust on it or did the k n n make it sound that good
Awesome am planning an update and this video helps a lot
That`s how clean I keep my engine bay, on my 2008 silverado. I went with the chrome look K&N cold air, with a 40 series flowmaster dual outlet exhaust straight out the back with chrome tips. The truck sounds and runs like a beast and a hell of a lot more power!!!!!
I haves 2010 Silverado 4 door that has the sand paint and I love it
Did u have to tune it? Or did anything to the settings of the trucks system? Or you can just install it without doing anything else to it?
Awesome video! I just recently installed an intake in my 2012 Silverado with the 5.3.
Just a heads up for those doing this.. if you clean the throttle body you need to have the idle relearn process run by a dealer, or use the scanner tool. It can technically relearn the idle over time but can take 50+ ignition cycles. I had this issue and my rpms would hang up when revving and downshifting was rough. I couldn’t figure it out for the life of me, but finally got it sorted out. Sharing to save a headache ;)
Nick Hill did you have to take it to the dealer to fix that issue that you had?
Jose Berumen no but only because I had a friend with the tool, that used to work at the dealer.
Nick Hill I had it happen to me too lol
X2 here also.. Had to use HPTuners to fix it..
How do you pass the smog check
Hey man , could you please tell me what's the part number for this exact intake
Is there any cold air intake for 2010 Silverado 5.3L
How do you clean your motor. Yours looks great
Hey bud I'm Ben from Tulsa ok, long ways huh lol, anyways question for ya, I was thinking about doing an upgrade myself on my truck 2011 Chevy Silverado, should I add dual exhaust first or should I do the cold air intake? Also I was thinking about adding a leveling kit, what height should I go for it to be completely level? I've seen different heights wasn't sure which one looked the best, everything is stock now and it's got 275/55/20 on it now, I'm sure you've got alot going on just holla back when ya can, thanks bud... Love you're vids btw keepin comin
Ben Edens
I just put a level kit on my Silverado. 2 inches in the front to level with the back. I put 20x9 fuel wheels and 33x12.5 nitto ridge grapplers and a flowmaster super 40 muffler. The back spacing is 1 and offset is 5 so it just barely sticks out. There’s a website called custom wheel offset and you can type in the kind of set up you want and it brings up others trucks that have it. That’s how I decided on what I wanted.
New video so stoked
Awesome video the rugged foliage shot...natural habitat
Lonestar, are you going to change your title now that you're back in Texas? Did your truck make it safely?
What part number is this kn filter I looked in Description and didn't see a link for intake
I've got the same one on my truck, a tune really woke it up. I also lined the inside of mine with a heat wrap. It lowered the IAT on avg about 10°
What parts did you heatwrap exactly?
William Gerow the inside of the heat shield box. The walls and the lid.
William Gerow here is a link to my Insta with some pics. instagram.com/p/BYEq7dxgqiX/
BigRob SilveradoMod thanks
How much was the tune
Love it 8 cylinder Symphony
I'm in love with your truck
If you put the HD bumper hood and grill color match it, it would look 100 times better
Hows your truck running with the KaN today? 2021.
I would believe that K&N dyno chart if there's an actual video with it running on a dyno with the hood closed to simulate a real driving situation. I think it makes a difference. Other than that great video!
Where do you get that cover? Mine didn't come with that
Love the truck man, I have the same year and color also. I just had a question in regards to your wheels. I was wondering if you bought hub centric rings for them? I bought the same wheels but don't know if I'll need to buy hub rings for them in order to run them and not have vibration problems. Thanks in advance
I get no vibrations from my wheels, even at high speeds. BUT the fitment of the wheel on the hub isn't exact. Hub centric rings are relatively cheap, so if I were to do it again, i'd use them.
Any change in gas mileage with this after installed?
I have the same exact truck and i love it.. but how do pass the smog check with the C.A.I ?? And where do i get it.
Most K&N intakes are 50 state C.A.R.B. compliant. They come with a sticker to prove it for the emissions shop.
Was that a drz I saw? Got one of those as well as the same model truck. 💪
What about Turbo engines with inter coolers?
I just ordered my K&N for my Silverado 2012. I'll inform after I put it in.
Do you have an exaust on this truck also?
Does your intake makes a poof noise went you shut off engine ?
Link for that k&n kit?
Great review! Man the engine bay of your truck is extremely clean what are you using to clean it?
Elbow grease. It comes in a 12 oz can. Rags not included.
Does the other cold air intake you have need a tune
Hey i have the same year truck as you and i installed a cai and it fried my computer. The battery shocked it fry when i took the neg cable off and back on when it was done. When i bought mine used it came with a optima blue top marine battery which was the issue but it never gave me issues after owning it for 2 1/2 yrs. it sucked replacing that computer and new ac delco battery. Keep up the great vids man.
I had a K&N Cold Air Intake on my 2002 GMC Sierra. Difference is with the system I had the filter was exposed instead of having the top shield. After watching your video I am considering that system on my 2013 Silverado.
love the truck! wondering what springs you have ?..i have a 2010 gmc sierra and im looking to make it about the same height at yours
Stock springs. Rough Country 3.5" leveling kit.
@@LonestarHawaiian aloha 🤙🏼. Is the back of your truck a stock height or you had to lift it?
What intake is that?
How did the tube mount to the new one coming from the valve cover
Wish i was able to feel a 15 hp gain. 😂
What about fuel consumption? Increased??
Broooo!!!! There’s just something about a SILVERADO...particularly this body this still. I have an ‘08 just in white! Love it. But really been thinking about getting a S&B cold air intake. What series is your intake? 57 77?
57-3058 Love the K&N
Thinking about doing this, just got a 2012 GMC Sierra crew cab,98k miles
Is that truck 2 wheel drive.
Does your silverado have the 5.3 and what is all done to it i have a 13 silverado 1500 5.3 with longtube headers xr1 borla airraid m.i.t and k&n drop in filter and hp tuner live tuning which also im gonna replace the airraid mit for the 50-3070 series k&n cai and by the way did you feel your truck any different
K&N CAI, Superchips Tune, Borla XR-1 muffler swap.
Feels a bit more responsive.
Thats great i removed the the m.i.t and install the k&n cai and it is a little more responsive the only thing mine has a 6" suspensión and 3" body lift and has 22"x12 scorpion rims with amp mt tires 325/50r22 but man your truck is badass
Benjamin Almendarez how do you like your truck with long tubes
Love the video . I have a vararam air intake on my hemi Ram
Love my Silverado but man those rams are fats and powerful!!
fast*
Nice!
Where did you get that heat shield I wanna get one when I get my K&N air intake
Can you tag the link to the product
What does he use to have his engine that clean !?
Elbow grease
Sweet
What if I live in a hot climate? 110 in summer
Is that a stock exaust?
If you don’t mind me asking what exactly do you do for a livin
PepsiCo Sales Manager
Lonestar.... you showed the old air system you took out but you did not talk about what you did to all the other connection like vacuum tube.... I was reading the idle relearning post... did you have to re-teach your truck?
No issues post-instal. Truck should re-calibrate itself.
do you have to get a tune done after this?
You don't have to, but it would perform a lot better with a custom tune.
Cool Video. Question - being in Hawaii I assume you get rain. How does it do with water in take?
Nice truck
How do you like those open country R/T was thinking about scooping some up. Are they loud at all?
LOVE the R/Ts. Super aggressive looking but quiet. I've had BF Goodrich A/Ts in the past and these are quieter.
i love the look as well. Just curious ive heard people have issues with them, and theyre basically bald after 15 or 20k miles. How much do you have on them?
Hi, pleas help me, what the part name air filter box k&n? I didn’t find it ((
Here is my part # 57-3058
Performance Intake Kit
It's been a while so it might have changed.
LONESTAR HAWAIIAN thanks a lot, you very help me!
Is the truck 4x4
"Rough County's 3.5 inch leveling kit" is that just the spacer? Does your rig ride harder after install?
Just a spacer. Makes the front end suspension geometry all out of wack. Extremely rough.
@@LonestarHawaiian Agreed but it does help if you get the strut spacer not spring spacer and get uppers
I have exact same truck down to the color bought it few months ago. Want to put on that exact fit with heat shield. Where do I find that exact intake?
Should be able to find it on K&N's website. That's where I ordered mine!
@@LonestarHawaiian weird I couldn't find it cam u send link for that one
Now with that heat shield and cover.. that makes more sense .. i don't like the short ram .. only good at night... in the day time.. hot temps n heat soak
My question is does the cold air intake really matter if you don't have the exhaust and the tune?
Memo: these intakes are a license to make money. For the guy who buys one? Not so much
Highly recommend AFE intakes, much better design.
I'm a new subscriber and I'm already hooked on your videos dude! Also, I'll be in Oahu in about 2 weeks so if you see some crazy Texan waving at you frantically, it's just me 😝😝😝
Appreciate the support! Enjoy your trip!
Now that you moved back to Texas I bet you miss Hawaii
My Truck looks just like yours but mine is a 07. Keep up the good content on the truck
I have an 07 it does nothing but break
I’m a ford man but that rado looks clean
Ford suck... Fiat-Chrysler are better
shoulda went with S&B intake, I like mine very much, i had k&n not a fan anymore they are making their stuff cheaper and cheaper.
What kind of exhaust do you have?
Muffler swap to Cherry Bomb Extreme.
Does anyone know if you actually got to tune it with a cold air intake? If so how exactly or what exactly is done to tune it?
Typically no tune is needed. You should be able to run a stock tune with a CAI.
I have a 2011 1500 ltz with a CAI and it's throwing codes P0102 P0171 P0172. Directly related to the intake.
Are you having any issues? Also how did you black out your bow ties. I have the exact same truck and looking to do these mods
No Issues with the CAI. Blacked out the bowties with palsti dip. Cheap and easy
LoneStar Hawaiian did you actually get increased power and mpg?
there sealed cooled air from factory
And they are restrictive as hell too
Well that should make my 6.2 455 hp GMC sound a little better lol
Did it? I am looking at buying one for my 6.2
I do like the top cover though
Where were the Mud Sharks?
I have never seen a K&N intake with a top cover heat shield, is that fabricated?
i cant find it either ive got the kit and installed it but can not for the life of me fine the heat shield top cover with any kit or from K&N
Hot air intake
Do you need a tune for this !!??
Those extra ""accessories"" are air baffles- its to deaden the sound of the intake noise.
I've seen several videos on these trucks and no one has been able to give a hint as to what those do. You're a true hero because I was about to go on a thirty minute search because it was driving me crazy
K&N filters and other performance air filters are good for just racing not good for daily use. Doesn’t stop debris from entering motor