It really worked and it's a very direct way to learn to equalize. I could make a noise pack for bigroom, trance or different styles of music and instruments, without hesitation I would buy it and I think the rest of the people here would too.
Get MFreeformEqualizer - it's a match eq that can instantly analyze your vocal and match it to the reference noise. Even in demo mode you can export the Impulse Response of the eq curve, load it up into a convolver, and you have precise correction for the vocal. Just remember to add smoothing and enable minimum phase so it doesn't kill your harmonics and introduce latency.
5:30 that's the reason why i do not use it. But, it is a really good starting point. we can also use other noise for mixing and mastering balancing if we want to. Great Video, even though I didn't learn anything new 😄
Max is back stronger than ever. I have the Spirits Vocal Mixing Presets and they are really good, you save a lot of time. In my case I set one preset and then I add or delete plugins to reach the perfect vocal sound for my song. With the tip in this video and the one in the "How to Fit Vocals PERFECTLY in Mix" video (which I use in all my songs), you can reach top tier quality sound without an expensive studio.
I use audiolens in Neutron 4. Record an acapella in Audiolens. And use that as a reference in Neutron 4. But it also depends on your music. If your music sounds dull...or too bright and the vocals don't match...you also have a problem there. It all has to fit together. In de pre-mastering stage,I fix it all.
So when I use the meters for SPAN why are my vocals so low?? Yours in the video are high mine are low regardless of the levels being at -18 through -12 range
I'm doing something wrong because in span it only shows me input roating 1L and 2R, that's all, and in the settings and processing tab, I only have one output
Had the same issue todday, to FIX IT ...If it shows numbers on the routing just choose the numbers (1-2-3-etc...) instead of the letters (C-D-E-etc...) for INPUT and OUTPUT, hope it helps
This is terrible advice. It’s critical to use the right mic for the right situation, not fix problems in post based on some BS this guy is trying to sell you.
It really worked and it's a very direct way to learn to equalize.
I could make a noise pack for bigroom, trance or different styles of music and instruments, without hesitation I would buy it and I think the rest of the people here would too.
Get MFreeformEqualizer - it's a match eq that can instantly analyze your vocal and match it to the reference noise. Even in demo mode you can export the Impulse Response of the eq curve, load it up into a convolver, and you have precise correction for the vocal. Just remember to add smoothing and enable minimum phase so it doesn't kill your harmonics and introduce latency.
5:30 that's the reason why i do not use it. But, it is a really good starting point. we can also use other noise for mixing and mastering balancing if we want to. Great Video, even though I didn't learn anything new 😄
You are a comedian
@@beatyafavela i do sometime :3
Max is back stronger than ever. I have the Spirits Vocal Mixing Presets and they are really good, you save a lot of time. In my case I set one preset and then I add or delete plugins to reach the perfect vocal sound for my song. With the tip in this video and the one in the "How to Fit Vocals PERFECTLY in Mix" video (which I use in all my songs), you can reach top tier quality sound without an expensive studio.
Thanks brother, this tip is the greatest!
I use audiolens in Neutron 4.
Record an acapella in Audiolens.
And use that as a reference in Neutron 4.
But it also depends on your music.
If your music sounds dull...or too bright and the vocals don't match...you also have a problem there.
It all has to fit together.
In de pre-mastering stage,I fix it all.
Record an acapella in audio lens? What do you mean by this?
Great video👏💯...Can you please show us how to use the instrumental noise to balance please
Love from Assam ❤❤❤❤
My vocals are so good that birds are falling on the ground to listen to it
Is it OK to remove the pink noise and the SPAN on the master channel once everything is matched?
So when I use the meters for SPAN why are my vocals so low?? Yours in the video are high mine are low regardless of the levels being at -18 through -12 range
how do i remove the white noise from my mic? Boosting the high frequencies destroys my mic
thank you😊
So I’m in a different DAW and the step where you choose the inputs in Span when you’re setting up. How do I access that window?
When should I do that in the mix? After the whole mix?
how come in the file i downloaded, theres alot of lowend freq info? and the one your eq shows has none?
The one you downloaded is atonal balance for instruments. I couldn't find tonal for vocals too
@@jamusboy5133 There two - for instrumentals and for vocals labeled :) Make sure you go through mixelite.com/free/?f=vocalnoise
Not working with FL Studio 20. Why?
Max can you please make a video regarding how to make music like forester!
Equalizer by Waves Factory does this
wich one can u please tell me the name of it ?
@@stickloow9821 it's just called equalizer
@@bossmanmusic1600 lol
Does this work if a human recording a voiceover in one track, meaning without music or anything in the other tracks?
Smart
Good day Max... 🔥
Gems 💎
I'm doing something wrong because in span it only shows me input roating 1L and 2R, that's all, and in the settings and processing tab, I only have one output
i have also that problem how ??
Im having that same problem to
yeah
because we open it with vst3
@@rongxuong3626 thanks for this tip, now it works properly ;)
male vocal cuted more than 100hz? o.O that's weird
Sooth 2 is much expensive btw :(
Yes sirrrrr
How do i join your patreon??
We don't have a Patreon - we have a standalone membership platform :) You can join here > mixelite.com/join/
damn, so hard
I can't get the download option
My span doesn’t showing routing like yours
So plz help me 🙏🏻
Had the same issue todday, to FIX IT ...If it shows numbers on the routing just choose the numbers (1-2-3-etc...) instead of the letters (C-D-E-etc...) for INPUT and OUTPUT, hope it helps
Better business bureau gonna have a field day with you
Whn i click they say succes=True:. I cant download it...
It could be due to some ad blockers. Can you try again in incognito mode?
Let me know if it works!
Can you make a video with the latest version of SPAN 3.21 The menu there is slightly different than what you show here.
use vst 2 for showing that menu.
@@rykdproduction6639 10x bro
when i open span i dont get all the output routing options any1 got a fix?
make sure you open vst2 version. not vst3.
brother I'm not being able to download the wav file. can you send me a direct link please?
ME TOO
these images are so ai
Which image?
@@polasbeatz All of the "stock" images
I think it’s dope for what this video’s purpose is
Yeah that’s pretty annoying
U care if ppl put their own pictures ? Loser
Hi
👏👏👏👏
❤
nie słychać że jesteś polakiem lol, super film!!!
not at all😏
is bro singing this alr!
🤯🤯
you did kanye dirty. lol
This is a complete lie you dont get anything, unless you sign up for a full course,
😮😮😮🔥🔥🔥🤘
👍👌🤙
always super annyoing vocals - in like every tutorial
Sorry about that! Please send over yours at max@mixelite.com :)
@@theMixElite or just take a splice vocal which isnt annoying af.
NAH BRO WHATS THE SONG NAME 😳🫢
This is terrible advice. It’s critical to use the right mic for the right situation, not fix problems in post based on some BS this guy is trying to sell you.
AI generated images 😔
So I’m in a different DAW and the step where you choose the inputs in Span when you’re setting up. How do I access that window?
❤