This Odyssey Case fits the XDJ-RX3, DDJ-REV7, & more

Please excuse the handheld lo-fi video. Needed to do this video outside the studio because of the size of the discussed item. I needed a case that fits the XDJ-RX3 and the DDJ-REV7. I found this case from Odyssey and am glad to find that it works with a few minor modifications!
---------------------------- PRODUCT LINKS -------------------------------
Odyssey 810318 XDJ-RX3 Industrial Board Flight Case (without glide)
amzn.to/3zEmBuD
Odyssey 810288 XDJ-RX3 Industrial Board Flight Case (with glide)
amzn.to/3MRusb5
Isolation Feet
amzn.to/3MSFqgk
Acoustic Foam 12x12x2 (12 piece)
amzn.to/3aZ2r3U
CAMERA/AUDIO/LIGHTING used to produce this video:
Zoom H8 multitrack portable recorder (dialog) www.zzounds.com/a--3970758/it...
Samson Q9U broadcast microphone www.zzounds.com/a--3970758/it...
Sony ZV-1 Vlogger Camera (front) amzn.to/32jLc9l
Sony HandyCam FDR-AX100 (overhead) amzn.to/3rEiWXN
MOVO LP4 omni-directional lav microphone amzn.to/3HGsXuM
Weelyte RGB wifi camera light (backlight) amzn.to/3Fwn8yd
NEEWER 660 LED panel pair amzn.to/3nzcyAq
NEEWER softbox diffuser amzn.to/3DyyHEI
K&F camera stand amzn.to/3DBCwc2
------------------------------ SPONSOR LINK ------------------------------
Direct Music Service www.directmusicservice.com
30% off first month, use promo code PJMONTHLY
10% off first year, use promo code PJYEARLY
------------------------------- DISCLOSURE ----------------------------------
The product links below are from my affiliate partners, which can include zZounds, Sweetwater, and Amazon. I earn a small commission if you click on the link and purchase an item. You have no obligation to do so however it does help me fund content like this video which I hope brings valuable information to you!
I am also an official product demonstrator for Pioneer DJ. However, this video is not produced in collaboration or partnership with Pioneer DJ.

[@priyonjoni]

PRODUCT LINKS:
Odyssey XDJ-RX3 Industrial Board Flight Case (without glide)
amzn.to/3zEmBuD
Odyssey XDJ-RX3 Industrial Board Flight Case (with glide)
amzn.to/3MRusb5
Isolation Feet
amzn.to/3MSFqgk
Acoustic Foam 12x12x2 (12 piece)
amzn.to/3aZ2r3U
Direct Music Service www.directmusicservice.com
30% off first month, use promo code PJMONTHLY
10% off first year, use promo code PJYEARLY

[@DJTHORR..]

Nice case i brought the Previous release for the XDJ-RX when it first came out... Odyssey cases are built like Tanks ...solid !!

[@DJTURNCUT]

Great informative video :) Thankyou.

[@deepsoulfulsounds]

Great to know! Thanks!

[@599_RiD3R]

Nice Video.. I bought a Dj controller case too for my but I went with the ProX brand due to its less heavy than the Odyssey..

[@1nfamousme210]

You mentioned the DDJ1000 SRT - Do you happen to know if you can go back and forth between the DDJ1000 and the REV7?

[@volcanik11]

hey Pri Yon Joni, Im looking for a case for the DDJ REV 7 that has a laptop slider but Im afraid that the slider is going to get in the way of the pitch control that is in "battle" position on the REV 7. Have you had an experience with using the REV 7 with a slider case and having enough room at the pitch controls?

[@justinjrahman]

Any case recommendations for the RX3 that includes wheels and laptop stand? As well as a good x Stand that’s not too low or too high

[@DjGCue71]

Im having a similar problem. I have a pioneer ddj sz2. With a case with a glide laptop shelf. I just bought a numark ns7iii with the screens. In thought i can fit the numark innto the case i have but it didn’t work.

[@justinjrahman]

What X stand are you using or would recommend? Will wait for link so I can get u percentage ((;

[@mixxterdj]

02:10 Did your RX3 come with locking type IEC power cable or did you get it separately?

[@priyonjoni]

RX3 does not come with the locking type. It just happens to be the one that came with CDJ-3000s that I grabbed.

[@mixxterdj]

@@priyonjoni That’s what I thought. It looked similar to the ones that come with CDJ3000. Now I gotta find one so that there is no more mishaps in upcoming gigs. Appreciate your input.✌️👍

[@priyonjoni]

The locking IEC cable serves no function on the XDJ-RX3. It doesn't lock on. I just happened to be using it.

[@mixxterdj]

@@priyonjoni Oh ok! That’s a bummer. You just saved me a few bucks.😀. May the force be with you ✌️

[@jermaine_event]

I can't find stock for any RX3 case in the US. Please help guide me in the right direction! My magma case won't be here until September and I can't wait that long!

[@priyonjoni]

Check the product links provided in the description.

[@jermaine_event]

@@priyonjoni Out of Stock

[@664sigarms]

Where did you get the feet ?

[@priyonjoni]

It’s listed in the description.

[@user-mi2ng3xr1r]

I'm #50 likes. Hey Everyone.