Check the condition of the gear due to over loading
HTML-код
- Опубликовано: 2 окт 2024
- #CheckTheCondition #OfTheGearDueToLoading
#AmazingThing
#AmazingTechnology
Truck body,
Pakistani truck,
Truck maker,
Truck repair,
Repairing truck,
2020,
2021,
Truck videos,
Не ну так каждый может, взял новую деталь и поставил. Надо было по Пакистански: корпус планетарки заварить гнутыми электродами, а шестеренкам зубья нарастить ею же и болгаркой подравнять! 😂😂😂😂
Great Job. You should let the video finish until the gear is put it back on the Truck. 😉. Greetings from Panamá.
I enjoy this thoroughly. No bullshit overdriven intro, just getting straight into the intriguing problem and working on it with very little to use. I hope the content format never changes
The intriguing problem is them. They are the cause of all these failures since they don't assemble the transmissions following the proper guidelines. Just because it works doesn't mean it will last. And they obviously don't!
@@MrCheckmateMarine you are right. It wont last long. There are some delicate procedures overstepped here that will result in premature failure- one being the improper tightening that is performed in several areas of the repair. I would never reference this for anything other than just enjoyable to watch, especially for what little they have to get it going. Not educational.
@@jameskuberski9621 The point is is that they could be so much better for so little extra effort. But they will not bother. They are too dumb or too lazy to bother. That is the real problem.
Muito bom comentario..com tão pouca ferramenta fazem um bom trabalho..
The best part is the whole family on any age is there to take it for future may god bless the whole crew proud of you
Yey child labour, hurray!
@@ckra2001 Not quite as bad when those boys are working beside their fathers/uncles. The adults in this case won't (usually, anyway) overwork and/or abuse them.
Are you smoking crack its child labour and they aint learning much that trans is completely fucked and they are making a poor attempt at rebuilding it
No manual or torque wrench just sheer experience. I think one of them trained in Germany when he said "Gutentight"!
Young mechanic : On how many N/m should that bolt be tightened.
Experienced mechanic: 3 moderate hits with the 1.5 kg hammer.
Hah😂
Maybe they could make that work, but I rather doubt I could!
@@dennisyoung4631 ..
ماشاء اللہ بہت زبردست ویڈیو ہے۔۔۔"ساحل کے سکوں سے کسے انکار ہے لیکن طوفان سے لڑنے میں مزا اور ہی کچھ ہے"😊
The team work is amazing good job guys I like watching your videos.
Thank you sir
Real professionals these team..they know how to dismantle and install without missing anything.. hats off.
These guys have never seen a torque wrench in their entire lives....
Skilled lil' dudes, though..
Impact wrench? Nope. Torque wrench? Nope. Snap ring pliers? Nope. Hydraulic press? Nope, we're good.
There are other vids on YT of Pakistani truck mechanics that show them using all of those except the torque wrench. One even has one guy working an albeit older electrical machine that adjusts a diesel fuel pump for the proper injection order.
I love how his sons are watching and assisting their father with the tear down and re-assembly! They too will become talented men as their father; May God Bless the family!
They all are little geniuses
Their father will end up very proud
Pure talent love it
Always a good idea to film the taking apart so when assembling one can have some guidance!
Lmao
@@Justme-jt1ef These guys could do this in their sleep. They probably done hundreds or even thousands of them and it’s just automatic
@@Radionut lmfao
Love these vids.. how many Pakistani does it take to rebuild a transmission? Answer: 5.2 five grown men and two boys.
It amazes me what these guys accomplish with less than ideal conditions and far from the manufacturers recommended tools, etc, and make it work...
i wonder for how long....
@@danieltaon7333 for long as need be
Oh it will work even if a chimpanzee would have done it, but it won't hold for nearly as long as if everything was built according to manufacturer specification. I would never have let them to fix my car gearbox after have seeing this.
@@dtiydr I agree, just amazes me that they can tear it apart and get it back together, I can get anything apart, but, putting it back together and working......
@@DonLuc23 Just have an order to where it should go and put it in such a way that it cant be put wrong and it will work fine. Or take photo just before you take on thing apart and then its just to go through the pictures and you will know exactly where everything will need to go.
That takes some doing to get all that back together . I'm impressed 😊
No, it’s very easy. To an uneducated dumbass it would seem complicated though.
@@waynerainey2606 Angry?
pretty good job, we're spoiled over here in America, but this is down and dirty work right here. get're done!
I was gonna say "how the heck do they keep all that straight with so many helping" but i've seen the trucks and how theyre driven, these truck workshops defo have job security
Overloading, on a pakistani truck? Now thats a first.
Всё норм 😜,не могу понять одного, нельзя сделать приспособы, съёмники,чтоб не валить по подшипникам молотком....?!
Этим проверяется уровень мастерства)) хотя не понятно вроде коробку могут перебрать но на остальных видосах когда двигатель собирают даже порядок обтяжки не соблюдают. Похоже когда в городе появляется новая коробка появляется и организация которая ее обслуживает и перебирает раз в неделю.
I have to give these guys some credit... they are a pretty good team, are pretty damn clean considering the conditions and are getting shit done. Of course we are discussing easy to work on machines however... because you aren't doing this shit on any modern truck or car, I can promise you that.
There's always that one person, you are him on this video.
@@jimbossemi-customs3129 So you're saying I'm "The Man" then? Much obliged
@@SquillyMon Sure, that's it. Enjoy being "
The Man"
@@jimbossemi-customs3129 COOL!!!
@@SquillyMon Have a great day my Squilly buddy!!
Well. Question from a 🇩🇪 ZF guy with +40 years experience. How long is that gearbox gonna last until it fails again? At least you got cheap labour. 😁
Would make a great movie “ 6 guy’s and a gearbox “.🤣
these are real mechanics, they understood how it works and work as a real team, great !
10:57 clamping a shaft that seats a bearing or a retainer in the vise leaves marks that spoil the seating.
I made several adaptations of "jaws" of copper, leather, nylon and wood to my vise, I have them with round and square fittings, so as not to mark the objects and pieces.
Excelente trabajo,éso es lo que llamo trabajar en familia ,dios los bendiga siempre, resive un cordial saludo desde Puebla México 🇲🇽
I like watching all your videos, you guys are so great!!!!!
Excellent Job.
I've done a few myself but off course, using Air, power tools.
Really enjoy watching your Videos.
Keep up the good work.
Salutations from Ohio, USA.
It amazes me how he remembers all parts to put together in sequence. These are genius mechanics. Wow!
I was thinking if I did this job I would have to take loads of pictures, number label every part. Have a massive line of order where the first one off is the last one back lined up. Bolts in labeled bags and it would take me days to complete. I also would be using power tools to speed the process up but still take me longer.
see the video recording 😂
I bet he does 3 a day,
@@E69apeTheMatrix420 uy
A genius or even mildly intelligent mechanic wouldnt fit bearings with a hammer in a filthy environment unless he wanted the repair to only last a short time.
Just so much fun to watch master mechanics at work. Very impressive.
They stripped the sun gear and destroyed the planetary gearset......
Once I was on a very full village bus in Goa India and as it slowly lumbered up a slope, when suddenly was this ripping sound as the gears of the rear end stripped out and the bus came to a halt. Naturally everybody got off the bus and walked.
Overloading
In Pakistan there's no such thing
You just put your faith in the elephant face man
And 8 legged man
You will arrive in your destination
Some will say
That's India's
Its sama same
Different name
Same
Sht
Si alguien leer en español lean y esto y me dicen porque:
Soy colombiano y desde que veo estos vídeos de mecánica y reparación de estos indues me pregunto porque aquí en colombia los mecánicos tienen el bendito problema de que se demoran meses en reparar un motor o meses en entregar un trabajo, porque...
Y veo estos indues tan talentosos trabajando en equipo y a la fija, te desvaran te dan con el chiste del daño y ya te entregan tu carro o moto rápido solo es cuestión de horas, entonces porque aquí en Colombia le dan tanta vuelta al asunto no comprendo...pero bueno
5 guys working on one gearbox, I’m curious would all these guys be getting paid?
Companies don't need proving grounds , just send your machinery to pakistan
Transmissão é como montar um quebra cabeça, quebrou o redutor, as engrenagens , interessante os anéis de câmbio, marchas, good work 🚜🌾
Thank you for a amazing video, just wanted to know how much is charged for this job.
Of course it was overloaded! Have you seen those trucks in India?!
Вау, новая запчасть !! .. думал заварят , и зубья болгаркой нарежут
I love watching these guys ! Like a colony of bees getting at it ! Working together ; helping each other as a team ! It's amazing how they're all on the same page ! It's almost as if they wrote the Parts & Assembly catalogue and manuals themselves !! No one Leader ; they all just pitch in and get it done !!
Если в Пакистане коробку ремонтирует 5 человек,то сколько человек будет в Индии коробку ремонтировать 😁
Во молодцы !!! Почти,как мои деды лендлизовскую технику ремонтировали, без талмудов, без динамометрических ключей, всё по наитию и РАБОТАЕТ !!!
Тоже интересно. Раскидали в десять рук, как знают откуда что. Ни моментов затяжки, ни приспособ, молоток и зубило)))
Amazing how fast they work ! They have funny voices too …
Their torquemeter is a hammer.
I bet I know how that finger got pinched!
鉄粉が けっこうありますね😅 それだけ削れてるってことですね
直すのにいくらぐらいかかるんですかね
This is just real amazing mechanical work
I want to see till it run on the truck 🙏
Next time
Wrong hammer to do that ,should be brass
Awesome skillful work! & I really admire the way the whole shop attacks the issue at hand as a team 👍🏾 and know leftover mysterious pieces like my DIY work 🍺
How much did you charge the customer to install a $375.00 dollar part ??? Extraordinary rebuild.
Whole engine they rebuild and reinstall in 200$, parts price are separate.
Nice team work, I wish I have that in my work 😞👍👍👍👍👍👍👍
This is the same transmission they repaired last month and re used the oil.
😂😂😂😂 I ALMOST believe that....
I was gonna make the comment that it looks like that has been opened up recently
These guys can't get parts so they have to fix everything with minimal tools...very impressive.
De memoria saben donde va cada pieza, son fabulosos.
Like Racing pit oompa loompas
Who gave dislike try to do this
That is one tore up planetary
Totally amazing it never ceases to amaze me that every single component part of any given vehicle seems to be readily available off of the shelf
Except that part that they mentioned the price on most likely had to be ordered and shipped to them....
They blow up so many transmissions, axles, engines from overloading, lack of matainance, crappy roads that's theres plenty of parts to go around.
Due to overloading ? I didn’t think they knew that was a thing 🤣
Mui buen trabajo le encanta ver con los pocos recursos que teneis los grandes trabajos que haceis saludos desde españa
These little boys will never lack anything when they grow in adulthood due to wider exposure to practical engineer at young age to that gentleman behind all these I offer my deepest salute to him ,his name will last forever and his legacy.🙏
Unfortunately they live in poverty all their lives struggling to make ends meet
@@tuffguy8656 Quite unfortunate to hear that 😟😟😟
Those boys are probably "freelance helpers" that hang around the area, quite common in the third world (I'm from the 3rd world). Shop owners (some are former helpers themselves, some are sons who inherited the shop from their fathers) call them whenever they're needed to assist in working on a workpiece then get paid after the job is done, then off to another shop that might need their help, be it a machining shop, radiator, or battery repair, even construction, etc. They are what you call jacks of all trades.
The logic behind this system is it wouldn't be financially sound for the shop owners to keep any of them on a regular daily payroll since their shops don't get a steady stream of jobs.
Those boys should be in school but since their families can't afford it, they do manual labor to help put food on the table.
In our country, kids might want to go to school since it's free anyway, the problem is lunch money, bus fare, etc. And besides, their parents need their help to earn a living.
For a number of reasons and maybe luck, some of them makes it big in their adult life, but most don't.
I love this..just doing it.
Muito bom. Parabéns. Saudações do Brasil.
Who needs power tools when they have power hands
When they hammered the bolt and nut with a hammer and thus totally don't care at all for any torque spec or pre lube any glidning surface or needle bearing, just make me feel sick when ppl call them pros. Not pro.. just not.
5 person team at work...who needs power tools?
Excellent job, no manual required.
Bhai bohat awla video.bass eik suggestion hai.part rebuild abd vehicle mein refit honay kay baad driver ki comments dalo.ap ki intl audience hai unko samjh ayay gi.thanks
The Gear box is the most complex part in an automobile ! For these guys ofcourse dismantling and fixing them back is a piece of cake , every day affair 👌😃
The hell you work on the ground for? 😐
Absolutely geniuse work... respect to you, as you just get it done...MAGIC....
These guys make my puny mechanical aptitude and experience look totally inconsequential!
Grandes mecânicos sem o mi mi que existe aqui no Brasil.com poucos recursos fazem um excelente trabalho.
N.
Brilliant at the 15.00 minute mark, re-assembling the gearbox while talking hardcore on the cellphone. Natural born genius.
How do they ever get it all,back together 🤯
This lead mechanic would be a mechanical engineer in almost any other country where he’d have had some more opportunity. Dude has skills! Where is this Pakistan? NW India? No indicators, no digital micrometers and not one damn torque wrench anywhere, and they get the job done!
And not a workshop manual insight.....respect
14:53 reverse idler gear , The old man has been inside a gearbox or 2.
I'll go out on a limb here, maybe stop overloading. BTW excellent team (family) work...
How does this guy put all those parts back together from memory............................................
Man I think the technical word we are looking for to describe the condition of those planetary gears is .. "Fucked" btw is this being filmed on the planet Endor? cuz they sounds an aweful lot like Ewoks
I think it's time for a new gearbox guys what do you think .
That planetary would be 2k here in the states
The sped up footage makes them sound like really sociable chipmunks and i happen to find that mildly amusing. Great job on the box btw
Some poor Japanese or German or Swedish engineers spent years of their life building and maintaining factories to produce bearings made to exacting tolerances and standards of cleanliness only to have a chap in Pakistan fit them with a hammer in an environment full of filth and dirt. The casings are then fitted with a Pakistani micrometer(a large hammer) instead of a torque wrench.
Exelente profissional e equipe parabéns a vcs..top..
Unreal,,no half million dollar press no 1,000 dollar torque wrench and no parts left over
Me encantan todos sus videos son unas máquinas humanas con todo respeto son muy profesionales en lo que hacen el señor es un gran maestro y les en seña alos niños todo lo que el sabe ellos aprendenderan su arte y son muy unidos que Dios los bendiga un abrazo gigante desde Colombia 🙏🙏hay les doy un lake
so easy lol I can do it on my own but after I’ve finished 😁 2-4 big nail screw still lay around
Good 👍👍👍🌹
Probably the owner voided the warranty. Is this the truck we saw taking an entire village?
👍👍👍👍☕
Always solving problems. No bullshit, no moaning about conditions or not having proper equipment. Just get in there and get it fixed! Fantastic!
Very comfortable interesting content
Here in America they would make it a series with bullshit drama, tons of commercials but not show you segments like these, now this is real content people!
how many of these people who are
now in USA doing backyard mechanic???
The lack of any safety gear is shocking. Sandals ffs! How many of the poor bastards have lost toes or worse.
Yo sabia que en la vida real los minnios eran mecanicos jajajaja
100K MILLES AFTER REMONT GEARBOX WILL DIE AGAIN BECOUSE POOR TOOLS FOR TASKS