Pipeline Welding - Deep Ditch Tie-In - THREE WELDS!!!
HTML-код
- Опубликовано: 8 сен 2024
- In this Pipeline Welding video we go deep into a ditch to do some Tie-Ins. Three welds and a little Oxy-Acetylene flame cutting are shown here.
▼ FOLLOW ME ON INSTAGRAM!!! ▼
/ xazazelx13
#Weld #Welding #PipelineWelding
Never seen it this indept before. Nice rare footage.
I love all your videos, I watch them an how the procedures are, an how the job goes, I'm just a boilermaker but I have a rig and I know how to weld down hand, but I can't get my foot in the door Dx
You have an interesting channel, can't so that for everyone but welding on a pipeline crew I find interesting . We all own a great deal to crews like yours. Without welders,our world would fall apart literally. Great video and be safe.
Got to love that 6010 throwing Sparks like a sparkler you guys do some awesome work I was really surprised you downhill all those welds
okee thnx man. yes I'm sorry its dutch !
ik werk momenteel bij kuijpers piping.
wij doen ook gasleiding etc maar meestal tot 4" 5"
ook wel ooit grotere diameters.
maar het lijkt me echt super mooi om in de pijplijn te werken.
ben ook zeker geintereseert en wil graag leren.
Badass work hand 💪🏾
Now that is welding! great vid dude.
Hola muy interesante estos vídeos, soy de Colombia soy técnico en soldadura y me encanta todo lo que tiene que ver con este arte, me gustaría aprender mucho más de este trabajo quisiera salir de mi país en busca de nuevas oportunidades ojalá haya alguien que me pueda ayudar, es mi sueño trabajar de esta manera muy buenos videos te felicito 🙏
Right on man. Great work.
thank you for the bad ass videos. awesome job you have. super cool man
alright thanks man your the expert
Nice work lads...
Nice video! Keep up the good work guys!
hello beautiful video, here in Brazil we use the electrode penetration and cabamentamos root weld with FCAW and al eletroldo which was used for and how fzazem, thermal protection since it was cold there good luck and congratulations by video
ok thanks anyways. Have you owned a miller before?
thanks for our information.
super
Whipping motion back to basics :o
Dam Bro! Awesome vid ....
I was looking to join the 597 pipefitters but i come from a completely different field...my buddy has been with them for over 6 years and he said he would put in a good word for me..i was wondering if a person with no experience what so ever would have a chance of getting in. He is also teaching me how to weld once a week by the way
Very good vid
you guys rolled welding that up
Nice video as always, looks a little cold there.
what i found interesting is why the secnd electrodes you used were spiting so much sparks arround?
"rolled" did it quickly :)
hey bud i'm thinking of trying to break into pipeline this winter and was wondering if you could give a newbie a few tips and tricks about working on the line. I've done alot of position pipe with uphill 6010 roots and obviously theres some different methods to your mayhem. what's your average amperage per pass and why do you guys whip your fills and caps so much? I appreciate any help you can offer
yeah im not gonna argue with you cuz i dont have one i have small welder but not a welder gen. im only 17 and this is what i wanna do somday
What the average pay ? How often can you work ? Does you r local provide medical if you work a set amount of time? Can you do a video about pipe line welding life and pay ? Thanks Great Vids
yeah i have had good luck with them and not the greatest luck with the incolns but im willing to try any welder. are you certified in AWS B2.1 6G im guessing you are how did you go about doing this, and also what school did you go to? sorry for all the questions just trying to get in the industry.
love ur vids mate!
is it hard to get in to this world ?
im a Tig welder but i would love to get in to this,
yea i know a company here in the netherlands named A HAK. they are also in the pipeline industry.
so I'm just gonna send an email and hopefully they will respond.
Хорошо работают молодцы
way cool
He's doing his job there tiger, how's yours at a warehouse treating you??
I wonder how the paycheck look like in pipeline welding industry. Any thoughts ? *IN CANADA*
oh ic iv been looking at the miller big blue pipe pro 350, what lincoln do you own?
👍😍
6010 5/32 root - 6010 3/16 out? 12 in pipe? Sry just getting an idea
Have u worked for bodell construction
on the right
Dude you guys don't use mud boards?
ZAZAZEL, are you in any of these videos? are these welds x-rayed? and what is the weld tolerances (such as slag, and incomplete penetration?) do you have to regrind out the root?
You almost always grind your root down almost completely flat to bring out any discontinuitys and avoid slag entrapment to insure a good fully penetrated hot pass.
buffing that pipe while in a lift is considered working under a suspended load. i almost got ran off for that. i wish we could do shit like that
Is this in Utah?
I'm looking forward to find an opportunity to help 'n' learn welding on the go, if it is all possible to happen somewhere in one of the States. If someone got the means to help I'll certainly appreciate it. By the way very cool video! Keep the videos coming! Thanks!!!
u guys worked bodell
Where did you guys get your training ?
Just curious questions:
I see most of the welders using a rapid forth-back motion on the stinger, in a way I have not seen in any other stick-welding-scenario before. Is that a way to get tactile feedback from the grove to position the electrode?
And BTW nobody seems to use Auto-darkening Helmets. Too uncool in the trade?
TIA, /Luis
Auto darkening lenses are great. They can be a little finicky using them outdoors. I use the speed glass with the papr. I’m a shop guy though 20 yrs in the field was enough for me. I am a house at now.
How much u make a month bro just waiting for 2013 to get in college for welding and get a degree and certified
Why do the welders have those cuts on the sides of their hoods?
yeah sorry about that, i told him that i work for A-Hak and others..so if he needs a ride.. anyway spoke to him already..
if a welder knows what the hell he is doing good tie in on the toe of the weld
then it should pass x-ray down-hand on sch.120 pipe with 3/16 7010
Who supplies the rods?
running a miller?
I got ya bud
Do they just drag the rod or use the whip and pause method?
For the root pass....bury the rod in the gap and move ..."slide and glide".......Hot pass is gouge, gouge, gouge and move fast........Fill pass is tight arc and slight manipulation and some slight whipping on the bottom.....cap pass is a relatively tight arc and a slight weave to catch the edges of the bevel and some controlled whip and pause on the bottom........a dime wide and a dime high.....Cheers
to be in mainland pipe welding do you have to have your pressured pipe license or no ?
Haha really bro ?
Please do.
Please what is name this company
You gotta pass X-ray at all?
do you own your own rig?
u welded that up pretty fast is what hes saying.
R u union?
I see we never have them and when you go to set your self they get very pissy about it.
@ Gemert freak, ik werk oa voor hak, en diverse andere. als je de leiding bouw in wilt, stuur me dan een bericht, mischien kan ik je helpen..
god dawm wheres the fucking shoring
All welders love working in cold and muddy holes.... NOT!
if the root pass is 6010 why is down hill
elsanababiche ALL PIPE WELDING IS DWN HILL
Ï dream about it’s in my sleep yesterday night sml because ï passion for my pipelines dem just love pipelines omg sml just put gods first in everything me is going to do in my passions yah because it’s just dreams big 📝📝📝ï likes to moves too 📝📝🥽📌
Did they even teach you about WPS's in school? Sounds like you wasted your money or tax payer money...