Это видео недоступно.
Сожалеем об этом.
Sticking Deadbolt Fix and Troubleshoot - detailed DIY
- Добавить в
- Мой плейлист
- Посмотреть позже
- Поделиться
Поделиться
HTML-код
Размер видео:
- Опубликовано: 13 авг 2024
- Detailed DIY instructions to troubleshoot and repair a sticky deadbolt.
Комментарии • 98
Следующие
Автовоспроизведение
How to repair a Deadbolt that wont unlockMarrazzo Woodworking & DIY
Просмотров 292 тыс.
How to Fix a Door that Wont Latch - Easy Fix Anyone Can DoThe DIY Guy
Просмотров 16 тыс.
How to remove a deadbolt with NO Visible SCREWSseejanedrill
Просмотров 174 тыс.
Chris Gone Crazy - Stay Mad (Official Music Video) Prod. ChewChewChris Gone Crazy
Просмотров 456 тыс.
We Have a Tough Decision To MakeRyland vlogs
Просмотров 366 тыс.
THANK YOU PARIS! Closing Ceremony Highlights | #Paris2024Olympics
Просмотров 3,5 млн
How gold affects Steph Curry's legacy, LeBron named MVP, superteam coming? l FIRST THINGS FIRSTFirst Things First
Просмотров 536 тыс.
Kwikset SmartKey Troubleshooting: 3 Simple Steps to Fix Misprogrammed SmartKey CylinderKwikset
Просмотров 447 тыс.
How To Make a Deadbolt Move So Smoothly Into The Hole :) AWESOME Hack!Mr Know It All
Просмотров 81 тыс.
Schlage Deadbolt - Key turns all the way around & doesn’t unlock - How to RepairSE Lock and Key
Просмотров 123 тыс.
How To Fix a Misaligned Deadbolt | Hard To LockEveryday Home Repairs
Просмотров 297 тыс.
I had to sawzall my deadboltMatthias random stuff
Просмотров 146 тыс.
DEAD BOLT HARD TO TURN? TRY THIS EASY FIXAlex The Handyman
Просмотров 39 тыс.
the change with Schlage B60 deadboltsSE Lock and Key
Просмотров 28 тыс.
How To Fix A Sagging And Rubbing Door That Won't Close! 5 Tips & Tricks That Works! DIY Tutorial!Fix This House
Просмотров 4,1 млн
How to Make a Key That Unlocks All LocksInventor 101
Просмотров 6 млн
Почему отряд "Ахмат" Кадырова не приехал защищать Курскую область от ВСУ? #shortsВОТ ТАК
Просмотров 1,3 млн
Переехал на танке дом 😱 #shorts #start #кино #фильм #сериал #противвсех #танкиSTART
Просмотров 12 тыс.
تشيبس أهوي! 🗝️🍟 كشف رقائق البطاطس المخفية الخاصة بي! #snacksOne More Arabic
Просмотров 4,5 млн
САМОЕ МОЩНОЕ РАСТЕНИЕ В PLANTS VS ZOMBIES! (И ДОРОГОЕ...)IGRARIUM - Игровые обзоры
Просмотров 560 тыс.
ВСУ наступают под Курском. Путин требует действий. Эвакуация в Белгородской области. НОВОСТИРадио Свобода. Новости
Просмотров 1,3 млн
Слетела прошивка на LiXiang L7Настя ЧПЕК Туман
Просмотров 2,4 млн
МУНИСА РИЗАЕВА ЯНГИ МАШИНАСИНИ...FATTOHHON. COM
Просмотров 667 тыс.
Плач дорослих та дітей біля труни полеглого українського воїна #warСуспільне Полтава
Просмотров 192 тыс.
I have been a widow now for two years. Things hubby always took care of are starting to need attention. Thank you so much for this easy to understand video on how to make this fix. Took me longer to get the dremel out and set with a grinding bit than it did to do the wee bit of grinding I suppose the house now being 10 years old is settling a little bit. Such a relief as it was getting harder and harder to turn.
Bless you
Removed lock plate, sprayed the graphite onto the stuck sliding mechanism. Fixed it. Saved me the cost of a locksmith. Thanks!
Thanks so much! My deadbolt had stopped working totally. I tried the graphite and that didn't help. I was about to take the mechanism to the locksmith as you mentioned but then watched further and tried re-aligning the screws and that worked like a charm! I'm really happy I was able to fix it so easily thanks to your help!
Thanks for posting this. I watched the video and read the comments. I had the same problem as Mike Dunn and reading his comments and watching the video gave me the courage to take apart the whole thing and now my door works again!
Thanks, just saved me from buying a new lock. Today I inserted my key and the bolt would not turn. I did use some lubricant (ACF-50) and pulled the key slightly out while trying to turn - eventually I got it working. Then I kept turning the lock and everything to seem have come to where they supposed to be. Great success!
This is the second home in which ruclips.net/user/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU we've replaced our "regular" doorbell with a Ring video doorbell and we really enjoy it. It is very easy to install and it works very well, with a clear picture through the app and good in-home use (we added the chime, which is also easy to install and doesn't require another thought to use).
Thank you for sharing this information...after using the graphite lubricant, my keys turn the cylinder like “butta” !!..I get a little more life out of the lock and shared your handy tip with my daughters!!
The 1000th liked! I tried lubing this deadbolt with my DRY 3-1 one stuff I use for my casement windows-not carbon, it just never dawned on me to take apart the deadbolt itself. Two screws - two sprays- DONE! SO SIMPLE! THANK YOU!
My front door deadbolt was sticking. I tightened the screws and now the bolt doesn't stick. (watch at 4:00). Thank you!
Thank you! The deadbolt lock on my apartment front door wouldn't retract completely and I was stuck inside. I could turn it only about half way before it would stick and not turn anymore. I tried loosening the screws and wiggling the lock as I turned it just like you instructed. After a few tries I managed to get the bolt to retract completely. I'm free! It's still sticky so I will probably have the property management replace it.
The bolt gets stuck 2/3 in as we use the inside knob, twist. No apparent screw heads. They must be under ornamental cover/plate but can’t find slot to pop it off.
As far as the graphite, get a powdered graphite and not the stuff he's using here. No mess, no black gunk and nothing that stains. Just got some yesterday at Home Depot for just over $2, quick and easy fix, it made the key slide right in with no hesitation.
Rock N i
Extend the bolt and look carefully at all 4 sides of it. If rubbing, it will show as the bolt surface will be scratched shiny. File the strike plate to match the location on the bolt and if necessary, the wood inside. One issue: If you grind much of the inside long length, you weaken the strike plate's ability to resist a forced door entry.
Well done video, easy to understand and follow.
Thank you for showing all the problems it could be. The last issue was mine.
Hello and thank you for your helpful video ! I had trouble all through winter and your suggestion of loosening the screws and moving the cylinder abit for better alignment did the trick !! super !!
thank you, this fixed my sticking dead bolt, smooth as butter now!
WOW, Thanks a Million !!!!!! I truly understood your instructions/Demo.....
Just wanted to add that your instructions saved me the price of a Locksmith!!!! Thank you again for being so very clear via your Tutorial !!!!!!!
I used my trumpet valve oil to lube up the inside and it works perfectly now lolol. This video helped me take the thing apart and put it back together again confidently tho so thank u!!!
I have a new lock and new striker plate, that was replaced last fall .
That locksmith enlarged around the hole and added several screws.
I didn’t replace the wood door .
The deadbolt opens easily with and without the key - could it be the striker plate??
I have to sometime slam the door to get it to close.
Deadbolt hasn’t been opened since the fall .
Water gets in from along the threshold (settling?).
It works sometimes, but not others .
Would Graphite lubricant help ??.
And to which part?
Thanks
ขอบคุณคลิปนี้มาก ช่วยแก้ปัญหาเสียบกุญแจแล้วขยับเปิดไม่ได้ ให้เปิดได้...แต่ไม่มี graphite spray เลยใช้ WD-40 แทน ได้ผลเหมือนกัน
Graphite powder works really well!
Thanks for this very informative video. Now I know what to do for my deadbolt on h front door.
Thank you. Just needed to loosen the screws and adjust the position a little. All good now
Took me 20 seconds watching, a Phillips head and wd40 and hooray! You fixed it.
I have a deadbolt with keys on both side s. The inside works fine with the key but outside doesn’t. I think a friend might have damaged it forcing a wrong key but not sure. What should I do?
Did what you said with the graphite spray and it worked THANK YOU!!!
thank you. you fixed my lock. my lock (turning piece) was hard to turn.
What an amazing video! Im going to try this today!
door is closed and LOCKED. Both key and or the little knob (switch inside) just turn and bolt does not retract.
So I took out 2 screws from inside. and exposed it. I turned the mechanism and its turns but bolt stays extended into jam it doesnt retract.. HOW do I get it to retract it without trashing door? Any help would be appreciated. ...I think its the same thing DoGon is asking below.?!?
any chance you know how to get deadbolt to retract is cam slot just spins. Both key and thumb knob turn the cams and cam slot spins but doesnt retract deadbolt. Door is closed keep in mind. Im able to open lock up from inside...just dont know how to retract deadbolt ..once i get that retracted im golden ;-) Help Please anyone?!?
Thank you. This gave me a quick lesson before I had to fix one.
What would you do if the lock mechanism works but the deadbolt doesn't move and is stuck in the locked position?
I have an ancient Schlage double dead bolt lock on the front door,and the key would lock it fine,but it was a bitch to open,and I was afraid of bending the key. If I twisted hard enough,the lock would suddenly release with a loud snap,and I could open the door. I took the whole thing apart,and the trouble was with the mechanism that moved the bolt in and out. I applied generous amounts of lube to the sleeve holding the bolt,and worked it back and forth. It eventually moved freely. I suspect there was some corrosion where the bolt went through the sleeve holding it.
Thank you - this helped me fix our deadbolt!
I am an elderly lADy on my own my garage has a deadlock it hasnt been replaced in 26yrs I locked it the other day now I cant get in the garage it wont unlock at all n feels like something loose or broken when the key goes in
What can I do to open it without damage as I am in a rental ps I have arthritic hands
So the part where the key goes in was sticking out, like noticably. What can cause that to happen?
My door has a deadbolt and the key is stuck inside and the door is locked and I can't pull the key. What can I do I need help please.
We just bought a house and I have 6 deadbolts to change on the outside and none of the doors on the inside (or outside) close properly. Thanks for the tips! Hoping to not have to call a locksmith.
Graphite is terrible for the lungs. Silicone spray works great. Not messy like graphite
Exactly what I needed!
Thank you. Really nice video and demonstration, really nice explanation and voice!
Soprano
My key won't turn on the winter. What should I do? I have to use both hands to turn the key. I'm afraid the key will break soon. Help
Thanks !!
What about if you locked out n u can’t get in to change the lock
very helpful and clear
At 3:46, was very helpful, thank you
Very helpful! Thanks
you saved me some money thank you
My deadbolt doesn’t have screws on the inside so how do I take it apart
My issue with my key is that the original key turns but the new one doesnt turn went back to get the new key re-done but still nothing
youtube is amazing!
great tips before i attack my finicky deadbolt lock!
My keys get stuck after I unlocked the door I will try your tips 😊ty
Toucan DIY That accent are you Canadian? Aboot !!! Years of watching South Park....😁
thanks ! great video
Excellent
Thanks
Yes the graphite lube worked ,thank you
Thanks, very helpful.
So the deadbolt mechanism is broken I think. The door is closed and I can't retract the deadbolt enough to open the door. Ideas??
Exact same issue with me. Any help anyone?
What type of door do you have? Mine was an outdoor gate where the deadbolt wouldn't move. I did the following:
1. WD-40 into the lock ideally with a straw nozzle to get into small places
2. Spray into deadbolt area where it goes into the door
3. Hammer very lightly around the keyhole, lock, maybe gently with the key in the lock tap the back of the key with a hammer gently to transmit a little bit of force to the locking mechanism, if something has knocked out of place inside the lock.
4. This is the hard bit, and depends if you can see any part of the deadbolt. Try to get something thin and metal like an Allen key nudge the deadbolt up and down using the hook part of the Allen key. See if it gives you play to spray some more WD-40 into the deadbolt hole. See if you can insert the Allen key in between the deadbolt and the locking plate see if you can wedge the deadbolt back.
Good luck
Why can’t you use oil? Can you use a spray?
i have a problem.
i picked a deadbolt lock andbit successfully picked open and shut for me, however the key doesn't work in there now :/ OH NO! what do i do?! also other keys aren't working.
* and it
Thanks, worked very well.
How do you open a deadbolt from the inside without a cover? Mine is stuck and I can't open it
Lucaria Heralinn haha, same problem here, finding nothing
Thanks! It fixed my problem
Awesome!! Thanks!!
Thanks, you solved my problem.
It's happening on a new one with me. What gives? It happens when everything is installed?
I realize this is an old post, but if it's only happening when the hardware is mounted, and if you're certain the deadbolt is properly aligned, and has sufficient clearance, you might try loosening the screws on the thumbturn side a little, and seeing if that helps. Over tight screws can result in a latch being hard to turn. Also, for the latch on the edge of the door itself, did you use the screws that came with the lock, or longer ones? If those screws are too long, and penetrate into the larger hole, they could interfere with the mechanism. Without being able to physically visit your location, those would be the things I would recommend checking first.
Thank you it worked for me
Hey I completely fucked up my parents deadbolt smart key. they bought a kwikset smart key set I tried messing around with re keying on the deadbolt and didn't follow the instructions properly. so now I can lock it from the inside but we cannot use the key on the deadbolt. they key was working perfectly fine locking and unlocking from the outside. till I was messing around with the key and key tool. now I can't move the key left or right won't budge. The instructions don't mention this problem at all what do I need to do?
Hey, how did you resolve this issue? I literally just did this about 20 minutes ago.
Im literally doing the same right now.. But i have a deadbolt lock and a smart door behind it.. fuck
Thanks, it worked!
New cylinder? Does that mean a NEW KEY⁉️
It's a new deadbolt so um pretty sure it doesn't need to be lubed up or new key hole.
thanksbro
Fixed! Thanks!
Thank YOU!
Electronic dead bolt
I’m actually stuck in my bedroom rn so I’m pretty fuck lmao welp
have you made it out yet ?
nope my dead body is still there, I'm writing this from the skies bruh.
Damn .... rip bruhhh must be tough , hopefully someday someone can figure it out and at least recover your body and that ps4
Hope so
🧀
Just buy a new lock for 20 bucks installs in 5 minutes.
Way way to much talking explaining to much get people lost