I just finished running the EZBED wizard to auto-level my Linear Plus for the first time. It worked perfectly, exactly as the video and instructions say. I'm now printing my first test piece and the brim support is perfectly even throughout the whole piece. Thank you so much! Easily the best $25 I've spent on this project to save the headache of trying to manually adjust everything. Huge time saver!
Used mine last week. I got some trouble to upload the custom firmeware, but managed to make it work in the end. And it's awesome. I'll eventually recalibrate my printer when I'll put the heatbed. For now the printer is working everyday.
Definitely going to be utilising this in a few days when the printer arrives! Bed levelling issues were the only thing putting me off from getting a delta but this looks easier than even the auto-levelling on the cartesians I've used!
awesome, when my anycubic comes in the mail, i will definitely use this. Is it reliable? because sending money then waiting for an email seems a bit sketchy
I thought so too but its legit. From my experience he got back to me pretty fast with questions too. The program works. I had a slight issue Connecting after installing firmware. I restarted my computer and re opened the software it finally went to the next step. Also I cant close he program I have to use task manager. Im on windows 10. Besides that. Its easy and Its worth the money. I hate bed leveling my printer.
Hey man I have the pulley version and I can't for the life of me figure out what's wrong with my auto leveler. I'm using the included one but it just goes off the print bed and off to the side getting itself stuck...
I purchased the software more than 24 hours ago and still have not received an email back. There is no contact information on their website and this is the only way I think I can contact EZBED. Could someone please help me with my issue?
www.mouser.de/ProductDetail/Honeywell/V15H16-CZ100A06-K/?qs=sGAEpiMZZMtFyPk3yBMYYC7N8d8Se1PIwnqtJkJTGeY= but many electronic store will have same size/style in stock.
I just finished running the EZBED wizard to auto-level my Linear Plus for the first time.
It worked perfectly, exactly as the video and instructions say. I'm now printing my first test piece and the brim support is perfectly even throughout the whole piece. Thank you so much! Easily the best $25 I've spent on this project to save the headache of trying to manually adjust everything. Huge time saver!
Thank you !
The calibration was perfect after using this. This has saved me hours and will save me many more I'm sure. Outstanding product.
Used mine last week. I got some trouble to upload the custom firmeware, but managed to make it work in the end. And it's awesome. I'll eventually recalibrate my printer when I'll put the heatbed. For now the printer is working everyday.
Thank you for this and the software! I printed the part, grabbed a roller switch at fry's for $3ish and had the wires already. Pretty snappy!
Definitely going to be utilising this in a few days when the printer arrives! Bed levelling issues were the only thing putting me off from getting a delta but this looks easier than even the auto-levelling on the cartesians I've used!
Ordering my Linear Plus next week, Will be contacting you for this software. Thanks in advance!
I just sent my $ to you guys and I can not wait to try it out!!
awesome, when my anycubic comes in the mail, i will definitely use this. Is it reliable? because sending money then waiting for an email seems a bit sketchy
Don't worry that's reliable.
I thought so too but its legit. From my experience he got back to me pretty fast with questions too. The program works. I had a slight issue Connecting after installing firmware. I restarted my computer and re opened the software it finally went to the next step. Also I cant close he program I have to use task manager. Im on windows 10. Besides that. Its easy and Its worth the money. I hate bed leveling my printer.
very good !
can you send me the hole list of hardware for the sensor kit and cable
it would be greatly apriciated
Hey man I have the pulley version and I can't for the life of me figure out what's wrong with my auto leveler. I'm using the included one but it just goes off the print bed and off to the side getting itself stuck...
I sent 25 usd 5 minutes ago. But I do not know where to find the pieces to do self-leveling. Can you help me to level?
I purchased the software more than 24 hours ago and still have not received an email back. There is no contact information on their website and this is the only way I think I can contact EZBED. Could someone please help me with my issue?
I just made the payment so that I sent the software and it still does not reach my email, what time do I have to wait?
I want to buy using paypal but it show that ur email is not valid anymore
Where can i buy the micro switch Honeywell #V15H16-CZ100A06-K in Germany? Link Please!
www.mouser.de/ProductDetail/Honeywell/V15H16-CZ100A06-K/?qs=sGAEpiMZZMtFyPk3yBMYYC7N8d8Se1PIwnqtJkJTGeY=
but many electronic store will have same size/style in stock.
I wrote to you on an email, but I still did not receive a reply. Please check.
Did you ship to Turkey?
Please read instruction carefully, there's no shipment.
Does Anycubic Kossel Pulley work?
Yes it work on pulley too.
Is this for a anycubic plus?
Yes, it's in video title "LINEAR PLUS". Plus version comes only with linear rails.