Anycubic kossel 3D printer upgrades
HTML-код
- Опубликовано: 26 авг 2024
- Hi Guys! Here is my set of upgrades for Anycubic kossel Delta 3D printer! Hope you like video :) If some of you guys want you make order here are links:
Anycubic realease a new model, Kossel now comes with Heated bed and auto level! Much better, easier to use and simpler to assembly! Now its even better!
Get it from Banggood:
Anycubic Kossel 2018 PLUS 3D Printer Kit -- goo.gl/9vKYJ1
Anycubic Kossel 2018 3D Printer Kit -- goo.gl/TfpFaU
Anycubic Kossel PLUS 3D Printer Kit
EU Plug goo.gl/VRFnKG
US Plug goo.gl/Xzdsnd
OLD VERSION In this video:
Use coupon to get discount price! :)
coupon: Kossel10
Anycubic Kossel upgraded pulley version
US PLUG goo.gl/n3HKoj
Anycubic Kossel upgraded pulley version
EU PLUG goo.gl/A4MN2A
3D Printers in video:
goo.gl/Zs3nCh Creality3D CR10
goo.gl/S4vZpX Anycubic I3 mega
goo.gl/p6Acpf Anet A6
----------------------------------------------------------------------------------------
Popular Online retailers:
Amazon.com - amzn.to/3k08g0K
Amazon.ca - amzn.to/3c3efiJ
Amazon.de - amzn.to/3rnvj9l
Amazon.co.uk - amzn.to/3blB2qY
Amazon.se - amzn.to/3bhU55l
Aliexpress - bit.ly/2GWF50w
Banggood - bit.ly/2T0R8fG
Ebay - ebay.us/OJuoTs
3D printers parts and supplies goo.gl/NXVL7M
Cheap filaments
PLA filament goo.gl/D9jY9v
ABS Filament goo.gl/DBL1ok
Flexible filament -- goo.gl/1DMTJf
Premium/special quality filaments
APRINTAPRO shop goo.gl/sgXkAW
PrintaFix adhesion SPRAY goo.gl/Fr9tmU
Heat bed mosfet module -- goo.gl/91i7bQ
3D printing surface:
Sticker: goo.gl/WTmmiM
Glass: goo.gl/3GqP6Z
BueTape: goo.gl/7vQMYp
Switch for PSU goo.gl/sKzzkg
Rubber Timing Belt goo.gl/3xtQPv
SCS8UU-8mm-Linear-Ball-Bearing goo.gl/88pgGV
Thingiverse list of upgrades:
www.thingivers...
www.thingivers...
www.thingivers...
www.thingivers...
www.thingivers...
You like what I do? Support me on Patreon :)
/ nexitech
3D printer deals and coupons:
www.nexi-tech.c...
Please like and subscribe to my channel to help me making more videos.
Thank you so much for your support.
Best Regards
Nexi
I have hard time making BLtouch working correctly with this firmware that I have on my Kossel and there is only one Firmware available now(others are deleted?) and it last firmware Auto level support is totally absent. There is some other solution like using simple micro switch for auto level. I might try that but I already lost 10 hours of work trying to make BL Touch working with this motherboard and I did't have success. Personally I think that AutoLevel is not MUST to have for this DELTA to be honest. Am using it for months now and I calibrate it only twice. BTW if somebody have working firmware codes (right measures) and if wish to share here in comments that would be great otherwise its to much hustle and its not worth it.
If you are still interested I can push my working version to GitHub and link to it in a comment. I haven't found autoleveling worthwhile, after manually adjusting things , all that is needed is a bed height check.
I loved this video and i have been saving it for a long time and i actually just got my printer but i need help with it. I cant level it correctly and i need someone to help me by contacting me.
Moon Light it's a bit tricky as you have a bunch of different things that can be tweaked. Start by making sure the end stops are the same height from the bed, I used three identical spacers between the top braces and my limit switches after making the three top plastic braces level with the end of the vertical extrusion.
Adjust the screws on the top of the carriages so they all are the same distance from the top when homed.
Then you can start leveling (with a Delta it's a bit more than just "leveling" as there are curvature corrections)
I used the test print and instructions at www.thingiverse.com/thing:745523
So why didn't you build the parts at the Delta printer?
Nice printer. I'll be getting one soon. The thing I like about it is that it's all open source and lots of community support for this printer.
Yeah its very cool :) I like it very much! Check video review if you miss it. Regards
Nexi Tech I already did.😊
Defenately some of the best content ever
Thanks!
I have installed a heated bed & 30 Amp PSU to mine, I love this printer. Out of the 6 printers I have this one gets used a lot.
Hi Paul! Nice work! Yes I love this delta too. Best delta for price and great quality kit. Beauty :)
I want to thank you for putting up this video. I made the filliment up-grade and it works GREAT!!! Thanks again.
You welcome my friend! Am glad it works well for you. Thanks for positive report. Nexi
very nice to see you upgrade this printer. i have made the motor covers and am working on dual extrusion with a prometheus hotend. the bed clips are really great, but i am looking for/trying to design manual bed leveling as well.
that said, could you please talk us through the install and firmware changes of the BL Touch as well please? might be a better solution.
Nice video! I'm interested in the auto leveling part and the struggle with it. Can you make a video on that too? Or about not needing it?
So that's what those planetary gears are for? I thought the were just a 3d printing gimmick to show off in place 3d printing which is neat too.
Why you not use kossel linear plus for printing those upgrades?? (Just a question because i want to see kossel l. P. In action)
Its ok im print it in this printer
Are you going to add any cross bracing between the uprights to help reduce or eliminate possible twisting of the unit? Are you also planning to add the springs between the pairs of arms that hold the hot-end? Is there much risk of vibration of the unit by having the weight of the spool on the top of the unit as it gets turned while the filament is being fed to the hot-end?
Hey! great video I was just wondering does the kit come with extra screw and stuff for additional add-ons
great video ... only essentials
Where do you get those inserts for the bolts and also the bolts that go with them? To connect to the frame.
Very nice
Thanks :)
will the bed clips work with a heated bed? being pla etc - possibly make them 3mm higher???? love the top mounted spool holder, been bouncing this around in my head for a couple of weeks now, cool to see it done. good vid, cheers heaps
Well If you have heat-bed on your delta then you might want to print this clips in ABS. PLA will melt on high temps. So ABS here is better solution but not the best. ASA is better solution.
Great Video Nexi Glad to see your subs going up you deserve it ! As Always Happy Extruding......
Thank you so much for positive thoughts! Am glad you like it! Best regards or should i say ''best extruding'' ;)
What screw and nuts were needed for the top spool holder?
You should have scaled that top piece so it's long enough for it to not need the extra 3 pieces since you're using 1 nut and bolt on each side anyway.
hello, I have a problem, when I have to prepare for automatic leveling, it is not good, it seems that the Z does not go, because it goes to one side and stops. What's this' ? Thanks
I love this printer , but the inscribed square is only 12.5cm , good looking now! Are you planing the tcm2100 drivers for it?
Is your bed mounting can work for 220mm heatbed
Hello Nexi! I finally could complete the mechanical part of the assembling and I have printed some stuffs but I cannot reach a good quality I tried to use the parameters from the 3d printer manual. Could you please share your basic and advance settings of cura?
Thanks a lot!
Hi Alan! Nice! Thanks for feedback. Here are general print settings for CURA 2.6.2 Version for Anycubic Kossel goo.gl/3sVKuC but please understand that I change my settings on every model I print. I have no standard settings that I use beside this. Best Regards! ;)
Awesome, thank you very much! I have been trying to make my best effort calibrating my printer. It's a lot of fun! Thanks for all you shared. regards!
Pls pls anser i am strugeling Betren the anet a6 and this Printer nur wich ja better???? Pls help
Hi, can you do a video comparing the Kossel with the A6? :)
I love that your printed almost every upgrade on different printers. Where did you get that clear bowden tube? Is it PTFE?
Yeah its pretty cool :) Actually that tube is Teflon tube that was in printer kit with this delta. Check video review of this kossel delta if you missed it. Cheers!
Awesome video as well, thanks for it!!! :)
getting this as my first 3d printer. gearbest is sending me one to inbox and review. I am a total noob never done anything with 3d printers and just getting into it. do you recommend any software I get or anything that works well with this printer.
Good luck mate hope you will do it right. Well Cura works nice.
Hello! Some days ago I asked you about some 3d printers and the last weekend I decided to buy the Anycubic Kossel Delta!
Thanks a lot, this upgrade you made, excited me to bought it.
Just one question..
Do you thinks that the prints can be better if I add walls of acrylic and add some fans?
Hi! Cool! You welcome am glad you like my video. You mean to make some kind of enclosure to print ABS? Fans? Nope You don't need any more cooling. This printer has very good fan and duct nozzle.
Cool Video, i really like your reviews. Do you have other Delta 3D Printers you want to make a Video about?
Thanks mate! Nope I don't have right now but I hope i will received in 2-3 weeks one HUGE delta ;)
amazing
Thank you :)
What do you think of the new Creality Ender-4? A ~250€ CoreXY (faster than any prusa, slower than deltas) with Ultimaker style bed, seems like a perfect fit for a review on your channel. I'm building a corexy printer from scratch right now, but this one would be something i would look into instead, if I hadn't started my build some time ago.
Yeah actually! Well price is good and It looks pretty nice as well. Just in between Delta and coreXY. Could be good choose. I try to get one for review.
BTW i think first upgrade on this one will be adding V rails on other side of heat bed to support Z carriage :) Keeping whole Z carrige in middle air don't see like ''strong' solution. But that's just my quick look ;)
Yeah i never understood that choice of bed design... It's cheaper, but you need to build it so much more rigid just to keep it from wobbling.
@Nexi, won't the bed holder warp and get flimsy due to being PLA and the bed heating up? just a thought. I think you should print it in ABS to avoid the change in its size or it warping.
I don't think there is a heated bed on this printer
Then it won't be a problem.
No heat-no problem :)
I'm having a difficult time with the auto level, I'm using a microswitch. It auto levels fine but it doesn't seem to use the values it probed, I guess I need to spend some more time on it.
Did you add G29 in start G codes? Am still waiting for my extended cables for BL touch. We will see how it goes.
Will you upload a video of the install and auto leveling process once your cables come in?
Yes of course
I have hard time too making BLtouch working correctly with this firmware that I have on my Kossel and there is only one Firmware available now and it don't even have support for Autolevel. I lost 10 hours of work trying to make it work with BL Touch and I did't have success. And I think that AutoLevel is not even must to have for this DELTA honestly. Am using it for months now and I calibrate it only twice.
How do you get such good prints without a heated bed??
You don' need any heat to get nice prints :) Only good settings and perfect leveled bed ;)
It's true you don't need a heated bed. Once the first layer is down and sticking to the bed, no more need for the bed to be heated. Its not doing anything to the continued layers on the piece.
Quick question, where is he PSU?
This delta use Power adapter similar like Laptop power adapter .
I just got one of these printers. Just finnished setting up but it wont show any of the files on sd to print. they show up on pc but in printer all folders apear empty. Any one know why?
batteryphil Check your LCD cable and try another SD card. Also what slicer you use? Files need to be G-codes.
Did you get auto-level installed? Thank you for the video.
I have hard time making BLtouch working correctly with this firmware that I have on my Kossel and there is only one Firmware available now and it don't even have support for Autolevel. There is some other solution like using simple micro switch for auto level. I might try that but I lost 10 hours of work trying to make it work with BL Touch and I did't have success. And I think that AutoLevel is not even must to have for this DELTA honestly. Am using it for months now and I calibrate it only twice.
Doesn't it have auto leveling right out of the box after assembly?
Luc- leroyal This one does :) ruclips.net/video/HL3mAHV-9Ds/видео.html
When will you do a video on the auto bed leveling?
Laszlo Feledy I received my BL touch cables yesterday. A will do video soon as possible.
I have hard time making BLtouch working correctly with this firmware that I have on my Kossel and there is only one Firmware available now and it don't even have support for Autolevel. There is some other solution like using simple micro switch for auto level. I might try that but I lost 10 hours of work trying to make it work with BL Touch and I did't have success. And I think that AutoLevel is not even must to have for this DELTA honestly. Am using it for months now and I calibrate it only twice.
how many 3d printer do you have?
Not nearly enough :) I hope I can get much more and try out and review every 3D printer out there(good ones) and give my honest thoughts about it to the people with same interest. Am fascinate with 3D printers! :)
Hopefully we can help you rise up and you start getting high end machines (BCN sigma r17) to review but I d really like that you are kinda the budget printer go to guy.
What would you recommend upgrading to print with nylon?
Dalton Sessumes Well, The Hot end can go to 260 Degrades so you only need powersupply and Silicon round heater(to install under glass) or new aluminum round heated bed. Firmware already has support for heated bed and there is port on motherboard. That's it.
Hi, how much did you pay for this in the US?
Around 200usd. Check links under video description and check review video as well. Cheers! :)
first
:D :D :D