Anycubic kossel Linear Plus 3D printer full review and upgrades
HTML-код
- Опубликовано: 26 авг 2024
- Hi guys! This is full review of latest version of upgraded Anycubic Kossel Linear Plus. Very impressive Delta style 3D printer with affordable price. Kossel delta now comes with Heated bed, bigger power-supply, new carbon fiber effector arms ,auto level feature, spool holder. Video includes: Unboxing, assembling, hardware overview, Auto-leveling, Test prints with PLA, ABS and PETG filament with time lapses and detailed look at test prints, speed test, noise level test, heat-bed warming up time test and few useful upgrades with the guide how to install them. If you want to order this Delta 3D printer please check links below.
Get Anycubic Kossel Linear plus from:
Aliexpress - bit.ly/2m4t26r
Amazon - amzn.to/2IMHt98
Banggood - goo.gl/9vKYJ1
Popular Online retailers:
Amazon.com - amzn.to/3k08g0K
Amazon.ca - amzn.to/3c3efiJ
Amazon.de - amzn.to/3rnvj9l
Amazon.co.uk - amzn.to/3blB2qY
Amazon.se - amzn.to/3bhU55l
Aliexpress - bit.ly/2GWF50w
Banggood - bit.ly/2T0R8fG
Ebay - ebay.us/OJuoTs
Cheap filament for 3D printer:
PLA filament for 3D printer
On Amazon - amzn.to/2K6U99U
On Banggood - bit.ly/2pZSiwK
PETG filament for 3D printer
On Amazon - amzn.to/36RHEsz
on Aliexpress - goo.gl/8Cfsrb
ABS Filament for 3D printer
On Amazon - amzn.to/2K5S4LH
On Banggood - bit.ly/2CurLuc
Heat bed mosfet module -- goo.gl/91i7bQ
3D printing surface:
Sticker: goo.gl/WTmmiM
Glass: goo.gl/3GqP6Z
BueTape: goo.gl/7vQMYp
Switch for PSU goo.gl/sKzzkg
Rubber Timing Belt goo.gl/3xtQPv
SCS8UU-8mm-Linear-Ball-Bearing goo.gl/88pgGV
Links of 3D printed upgrades parts in the video:
Delta Endcap -- www.thingivers...
Bottom Corner -- www.thingivers...
Heatbed Clips -- www.thingivers...
Kossel ball feet -- www.thingivers...
Gear that I use for my videos:
www.nexi-tech.c...
You like what I do? Support me on Patreon
/ nexi_tech
I put a lot of effort and time in my videos and I would appreciate if you click on the ''Like'' and ''subscribe'' button.
Thank you so much for your support.
Best Regards!
Nexi
Thank you for the review. It is nice to watch a video with no unnecessary music, without 'funny' segments and lots of tests with different filaments and settings. You totally seem like a guy how knows what he is doing. I'm sold and going to give this printer a try. I perviously had Tevo Tarantula, but over 6 months I was printing (and buying) upgrades 90% of the time. The factory parts were wobbly and the print quality reflected that. I got frustrated, sold the pice of junk and decided that I will never touch any cheap printers out there, but this printer seems to get job done. I salute you and you have earned your subscription and like from a guy who never rates videos. Again, thanks a lot.
Not only did you provide perhaps one of the most comprehensive and detailed reviews I have EVER watched, but you always suggested several basic upgrades! I’m hoping to receive one of these for Christmas in replacement of a heavily modified MP Mini v2 I have.
Benjamin Gates Thank you so much for such a nice and positive feedback. I'm glad that you liked my video and found it useful.
Best regards :)
Nexi
Your place is always so clean! My 3d printer/hobby room looks like a bomb went off inside Radio Shack.
My first printer. I am having great difficulties. This video has restored my faith. Now I must try again using what you have shown. This was a great video, the best on the Kossel. Thank you!!!!!!
This is one of the best product reviews I have seen. You did an excellent job. Thank you for taking the time to share your views and knowledge with us. I look forward to viewing other videos you have made now that I have found your channel.
Possibly the best 3d printer review I've seen. Great work.
I totally second you. Very thorough and clear review which even tackles settings choice and upgrades. Your review may just be the best I ever watched for a 3D printer since I started looking into buying one.
Thank you for your great efforts!
Also I love your Eastern European accent, do not ever lose it. ;)
i was convinced to buy this thanks to your review. great videos man. keep the content coming.
AJax Thanks man! :)
THIS STUFF IS AMAZING...NEXT BIG BUY I GET
freaking upgrading itself xD
@@user-nh9jj2bx5v Mine is doing that. Blue caps for the top. Didn't look good with White one and I didn't want them in Black. Looks good with Blue too.
I purchased one of these and am impressed with the quality and the finish. Both are great. The machine comes well packaged and was easily assembled. I did have a problem with the auto leveler that turned out to be a problem that I designed myself. I put a ty rap on on of the legs of the printer and routed it around to the wrong side. When the printer went to the top it pulled the auto level component out of the circuit board. Was not a big issue and was up and running quickly. Over all the machine is wonderful and I would suggest to anyone that this is a perfect machine if you want to run PLA. There has been talk lately of the problems with ABS and concerns that it might be toxic. I don't know if that is an issue at all but PLA is made of corn and I feel more comfortable with using it as a material. About six years ago I purchased a Qidi printer for my grandson and it worked pretty good. This machine is easier to work with though it does not have the two extruders. For the price of the Anycubic Kossel you won't find a better printer. Did I mention the support? Anyway, these guys are great and will have a note back to you in one day if it is not the weekend or Chinese holiday (October 1-8). I found my machine on ebay for $200. I couldn't be happier.
Word of warning, do not lose a slider off the end of a rail. If the balls come out and you lose some of them, even though they are the same as the HGN12HC, they are not the same. The AnyCubic ones are tighter tolerance ones than the replacements you can buy. The replacement ones will wobble on the AnyCubic rails. You can use the ball bearings from the replacements to replace the ones in the AnyCubic sliders. Leave a gap between the first and last one or they will not work right. And the AnyCubic sliders will not slide onto the short stub of plastic rail that comes with the other sliders. Your other option would be to buy a slider and rail as a set. If it wobbles, send it back as they should not do that when new.
I bought one and am getting fantastic prints. Using cura 15.04.6. Results are excellent.
Awesome! Thanks for update.
I bought this as my first printer after watching this video. Keep in mind I had no other experience with 3d printing. I had no problem assembling it but the firmware was problematic. Thankfully nowadays there is a firmware called "Marlin" with appropriate config files for this printer. After finding and installing this new firmware the printer is 2x better than before!
Yeah, mine just rams the side beam when auto leveling (even though all motors work in manual mode) and ANYUBIC support is some Chinese dudes with broken English.
Mind sending the link of marlin?
I was tiptoeing around the Delta printer idea for a while - you've sold me one :) bought it after your review, now just waiting for the delivery, thanks! Good review mate
Fantastic review. One of if not the best review ever. You missed nothing, explanations were complete and the pace was spot on. Thank you.
Great reviews dude. Im gonna purchase the linear plus and possibly the photon this weekend based on these reviews. There has been alot of negative videos on the linear plus on youtube but anycubic seem to be keen to correct the noted flaws. So hopefully im in luck with the build and firmware i recieve once i print the addon features. Keep up the good work!
How about a tutorial on how to update to Marlin 1.1.9?
The stepper motors will be same temp no matter what print material you use so make the holes, the convection is less than the generated heat from the motor itself while running
Very good review, just saved me 500 euros as i could have ordered essentially the same thing from a different brand but costing 500 euros more. For what i want to do with a 3D printer this is just perfect. Cant wait to get mine delivered !
what firmware please update
Great review and video overall! Thanks a lot. You've convinced me and I've bought one of these off amazon. Organised video, with subtitles for the details of the prints. Keep up the good work!
Thank you so much for the feedback! It means a lot to me. Comments like yours gives me energy and will to make more videos and stay on you-tube. Best regards mate and good luck with your Delta! :)
How has the Anycubic been? Have you had any issues?
anonimuso, it's a great printer. I've printed about 3kg worth of filament parts.
Firstly I've printed upgrades for it: frame corner reinforcements; belt tensioner (which broke and I've replaced them with the upgraded version from thingiverse), extruder fan shroud, cable clips, buffer legs, ring LED lights. After the structural reinforcement upgrades, the prints became much better.
I had an Anet A8 before and compared to it, this Anycubic Kossel Linear Plus is twice as fast, good for details but it does have some wobbles.
Have you bought one too?
Sergiu S No, I haven't. But thank you for the info. I'm still deciding, but now I'm leaning towards the Tevo Tornado because build size is very important to me.
Just get 2 slabs of concrete 40x40 cm place below and above and off you go with 300mm/s and above, move speed 1200mm/s and jerk at 1. Perfect results. Love my kossel
Fantastic review. Seeing how this prints has really helped me make up my mind that I'm getting this model!
Another awesome review as all your other reviews with a great amount of information. Thank you!
Please review the newest Anycubic 4max when you can! I am an Anycubic fanboy :)
Thank you so much! Your feedback means a lot too me. Comments like yours give me strength and will to continue my work and stay on you-tube.
BTW Anycubic 4max is on the way. I hope I will receive it soon :)
Cheers mate!
I'm receiving my first 3D printer in a few days. It's the Monoprice Mini Delta. But, I'm gonna order the Anycubic Kossel Linear Plus as a Christmas present for myself. Awesome review. I'm gonna print all of the upgrades.
Thank you for the positive feedback. Kossel Linear plus will eat that Mini delta alive :D
PLEASE! Give your CURA profile !!!
YES PLEASE! I NEED THAT CURA PROFILE!
@@adityavakil9371 I can give you my profiles
Are you still using this 3d printer? Would you mind sharing the settings /cura version you are currently using :)
You review and presentation overall is good however there are problems with the presentation on assembly. I do realize that this is not an installation guide but you do take on the task of showing how to build the structure. Within that context here is the list of concerns:
A - there is no mention on keeping the tee-nuts aligned within the aluminum track to achieve the best anchoring methodology.
B - There is no mention of not allowing the linear sliders from moving off the track as the loose bearings will fall out.
C - There is no mention of aligning the railing with the bottom frame.
These above issues are indeed critical and by omission they do not guide your visitor down a safe pathway.
Just got one of these, then remembered your channel for a build overview, just as well you like it, !
You could set the infill before walls setting off. It should make the infill pattern less visible.
Outstanding presentation and parts printing to show the Units capability. I am pretty convinced I can use this printer for my Model Train Parts. Thank You so much.
What scale?
S gauge, larger than HO, smaller than Lionel, made in the 50s by AC Gilbert, American Flyer.
Very good and thorough review! Subscribed.
I have the same printer and upgraded it with a 32 bit SKR1.3 board from AE. Already prints very good, but not as flawless as yours yet. These printers are great to play around and tweak with :)
Like video, so I purchased one. Having one problem with the leveling, 3D printhead stops about 5 to 10mm before the heatbed and that is where it starts printing.
Allen Van Horn Listen carefully from 4:15 when I talk about levelling. You need to fine tune your z offset. You could also follow/read instruction there is detail section how to level the printer.
Thank you for your great video ... that convinced me and I have also ordered this 3D printer.
And thank you for the UPGRADES...
Great information as usual. Hard to watch these without commenting as people are usually quick to criticise but seldom give credit where it's due. I also like your testing techniques as you really try and find if they have any weak spots.
For your next challenge (haha) swap out your controller for a 32 bit one (ie. Lerdge-K) with better micro stepping as the 8 bit boards are supposedly punished with all the floating point maths that's required. The Lerge boards have inbuilt FP unit and run at 168Mhz off memory.
been building mine since 10/3, the mechanical assembly was easy, but now I find the manual is inconsistent for z stops compared to the image in the manual, and it wont home or run the levelling process correctly.
If I have I to do firmware corrections or anything other tahn uploading a new version, then its going back. Not a good kit for a beginner. Glad yours work good for you.
Great informative video. I think a lot more people will get hold of one thanks to your great video.
Jeremy Feldmesser Thank you so much for positive feedback! Best regards
I am reading this on an Amazon rating: "Cura is a pain, sometimes it makes layers shift when using supports it generates. Flavors don't always work save with Marlin and it shifts layer riprap and it's fine." It seems other reviews on Amazon also state that Cura is not the best to work with. Rating posted on: April 22, 2019.
what is power consumption, and what is better for this price this Delta or Ender-3?
Great review - many thanks to you !
Could you please show your Cura settings for this awesome prints .
Beautiful review, is it a good first 3d printer?
Is it good for Miniatures?
Thank you so much for this great video! I was unsure about this printer but with so many examples shown by you - I see it is a great deal as long as you know what you are doing. Great job!
Awesome review! Mine comes in the mail today, I'm super excited!
xxroyalxtigerxx That's man! Good luck with your machine! :)
I'd love a larger bed , maybe 350mm🤔. But I'm just about sold on this unit. Great review!!! 👍👍
Just bought this printer because of your (great) review.
Niram1969 Cool :)
Nice vid. Really really good print quality. Not a fan of delta printers personally, but I will look into this one. Thanks for the camera info :)
LMF5000 Nice. You welcome my friend. Best regards ;)
Wow man...what a great review! Keep up the good work!
Great review. I own this printer and it is spectacular for its price !
Christelle Deneau Thanks! I agree
hey: i own this printer too nut ... i have tried everything to calibrate it (aut calibration doesn't work at all) but i unfortunately can't arrive to a good print quality: when it prints something for more than 3 hours it start to print in the air completely randomly... can you help me ? for example sharing with me your cura configuration or better how you calibrate this printer ... thanks a lot f you'll do it!!
That was a really good, very complete review!
Patrick Giagnocavo Thank you very much
Wondering if you could share your Cura profile for the Anycubic Kossel Linear Plus.. I tried copying your settings for PLA, but can't seem to get the same quality.. Only got close but not the same when I up-ed the flow rate to 200%...
Hi, I am a huge fan of Anycubic Kossel Plus. How about your Kossel Plus after one year ? Is it working good ?
Hi great vid. You seem to be the lucky one as my printer will not auto level. When it is powered up it just says welcome Anycubic Kossel and does not show which firmware version it is. When I try to auto level it will only probe the left side and goes off the print bed as well. I had lots of QC issues Two corner pieces at the bottom were upside down. The power supply was dead. The screen never lit up because the usb jumper was set incorrectly. Sorted all therse problems out and now it wont auto level. I think there are quiet a few people with this problem. Any chance of you leaving a link to a firmware that works cheers Tim
Your review is great. Could you share your Cura profile for this printer? I am using same printer for quite long time and i can barely achieve half of your quality. What is more, my models are always over extended (for example when i print model with hole 5 mm i get only about 4mm and so on) so whenever i want to print model which join some elements together it never fit to each other. Further more i always have to turn cooling fun manual from printer while printing, because setting it from cura profile don't work. I really can't get over this issues, and i think that it could be maybe software of printer or bad setting of cura profile, but i do not know to what i am suppose to change (yes i tried some changes)
hi im completely new to this printer (i got it used from a friend) i tried to print and it seems stuck trying to print on the back right of the print bed. any suggestions? im not sure how to do a firm ware update.
I have watched your review many times and i purchased the printer based on your review and now i wait its delivery)), as this will be my first printer can you tell me any upgrades you would reccomend to the machine?, can it print carbon fiber filament? and what is the extruder nozzle as i would like to buy spare parts but don't understand which ones to buy. So sorry for all the noob questions but your advice would be great. Great review and thanks. Alan
Really struggling with first layer, had printer a few months now and just can’t get it right
Can you maybe share your cura profile?
can you share your petg settings? im getting lot of strings
Hi dude. It was my dream after when you did review.😧 Today I couldn't resist and desided to get one too.😁 So, we'll have the results in a couple of days. By the way this thing cost me 188 bucks on taobao. Thx
Hi, I am curious if you could print nylon and polycarbon with this printer?
Hello, sorry for my bad english.
I really like your videos.
I will soon receive my Anycubic Kossel linear plus, on your video it prints aparemment very well! especially at 100mm / s, I use Simplify3D, is there a profile for this printer?
If not, can you download your Cura profile for this printer?
Very useful information, fantastic video. I never had a Delta before but this printer is very cheap and looks very good. Thank you!
LV-481 Thank you so much. I agree. I love this delta.
hi, I received anycubic 3D printer linear plus. The button to turn on was out of place, I mounted the button but I do not know if missing some pieces, are two or three ? I do not hear the shot, it will not turn on ? Thank
Can anyone help me find the stl for the vase?
Hi Great review the best of the anykubic kossel, one question im waiting for my kossel arrive and im programing the slicers can u share with me the cura profiles or simplify 3d profiles u use?? Ty
Very informative video i have one question how did you get (Anycubic Delta Linear Plus) in the printer section of Cura
can you please share your cura settings.
Great review. I will now buy one.
Enhorabuena por tus vídeos. Son increíbles y se nota el trabajo que les dedicas. Una pena que no sean en español jejejeje. Un saludo!!
Google translate from Spanish to English: Congratulations for your videos. They are incredible and you can see the work you do for them. A pity that they are not in Spanish jejejeje. Greetings!
Thank you so much my friend! Am glad that you like my videos and that you see my hard work behind my videos. Best regards from Sweden!
P.S. Sorry for not knowing Spanish I turn on subtitles :D
Thank you very much for your video, I decided to buy the anycubic linear kossel plus printer after watching your video. I am very happy with the printer, but I have a question, and I would be very grateful if you could answer me. What profile have you used in the Cura program? I am using the DeltaBot profil. Thank you very much
Any chance you could share your CURA profile you are using as i cannot get mine to print well.
I THINK you should try silent steppers, flying extruder, tpu, and also enclosing the whole thing for ABS.
womplestilskin Silent stepper drivers sounds good,I might change them. Any suggestions?
Nexi Tech tmc2208
womplestilskin Thanks :)
Great video! You said all I wanted to know. Thanks!
Just one last thing... The calibration sensor should be removed after the levelling?
ComputermanAM13 Yes it should be removed as it obstructs the nozzle. You’d end up damaging the sensor
Yes, thank you.
I have just received it and works fine!
How much did it take to print the vase? Did Cura solve the 0.5mm issue in the latest update?
I am a Korean. This is a translator. I made a 3D printer in March, 2017, when I was 13 years old. And it doesn't get any better.If possible, tell me how to set up the CURA. My 3D printer model is an anycubic kossel delta 3D printer pulley.
is this still sold ? would be great to get this printer with TMC upgrade by default
Hi I know I am a bit late, but could you share your Cura Profile/Settings? I can't get mine to print as nice as yours. Or do you use a different programme? Thanks! We actually bought this printer after seeing this video.
I bought this printer and it is having trouble homing and getting the z axis position, was wondering if you might be able to put up a link to your firmware. it looks like a lot of these machines are coming with problems with the auto home and I'm hoping that your software might fix this.
Thanks to your video, I also purchased my kossel linear plus. it is a great printer. by the way how do you level the bed I have a bit the issue. Do you upgrade your firmware? Marlin1.19 or anycubic firmware.
Does it support nylon and PC plastics?
Excellent review. So much so that I bought one. subscribed and 'belled'
You print Benchy but you don't measure him? It'd be nice to know if the Kossel LP prints a 10mm line when you ask it to.
Great Review and actually the one that pushed me over the edge to buy it
did you buy it? tell some abaut it bro
Which is better this ons or ender 3?
Hey Nexi, dunno if you remember me but I'd bought the CR-10 Mini from your affiliate link after chatting in your CR-10 video's comments section last April (you mentioned the Mini was better because the smaller bed heats up faster than the large bed in the CR-10). I've learnt a lot over the last 4 months and I'm ready to try something different. I'm tempted to get the anycubic kossel linear plus to have the delta's speed, but I'm not a fan of the small build volume. What are your thoughts? Would you recommend it? Or would you get something like an Ender 3 instead?
I need a little help, I just put my Kossel Linear together and it's working great I print from SD card only no PC connected to printer. Whenever I turn on the printer and start to print I must run the bed leveling procedure or it will start the print like 10 inches from the build plate, running the complete leveling procedure then printing from sd works perfect. I must be missing some simple step can anyone help? It's a pain to run the leveling procedure all the time.
great video man, very helpful, keep it up the good work!
Thanks man! :)
Can you upgrade this printer using Klipper?
great video, thanks
Nice printer and review! Do you have links (cad files) to the additional parts (covers, feet).
Thank you! Check video description I just add links. Regards
Thanks for adding the links.
Great review! Did you run in to any of the issues with the software that were mentioned in other videos like the hotend crashing into the build plate during auto level?
tykelly310 Thanks! Crashing in to the Build plate? Wow! Not at all. Maybe they didn't follow instructions or did not connected wires to the motherboard correctly. When I connected my auto probe I test it first with the finger is it work or not. I can't image someone push "auto home" on any 3D printer without extra check all wires and connections and confirm are they connected and I are they actually work in the first place.
Nice video! Thanks!
what about the time to print?
hey, first of all great vid!
I’m the owner of the same model. After watching it through, I’ve noticed that you get much higher bed temperature. I’m allready struggling to get to 95°C and it takes quite long... Did you had any issues with the temperature or do you have any Idea what could be the issue?
greetings
This or cr10s pro or cr10s? Anybody help me decide
What PETG did you use? :) awesome videos continue the great work :D
Thanks mate! :) Check video description I add PETG link of seller. Cheers!
Could you please tell how you modified the gcode to resume print
Nirman Aggarwal Open your G code file with the Note plus program, measure by hand exact point Z-height where your printer stop, Ctr-F to found the Z axis point in the G code file, then delete all G codes from the beginning up to your Z measurement or closest one( Don't delete the start G codes only the movements!) Then add G0 Z( your measurement) before the movements line, to tell the printer to rise up print head first to that height and save the new G code. Done
If you compare thia delta to CR 10 or CR 10s, do they have same quality? Is this good for mass production printing?
SimRacing Gaming I got to say that for mass production printing CR10 OR CR10S is better choose and yes, they have slightly better print quality.
P.S. Under my CR10S/Mini/S4 videos, you have coupon code for discount price. Feel free to use it.
Great review and great printings.
I have a question for you, is it not needed to modify the printer firmware?
Thank you
Daniele Alghisi Thanks. No i didn't need to mod firmware or anything. Regrads
So good review Nexi, as always! I found this printer on Aliexpress with a considerable lower price, do you recommend to buy this one on Aliexpress? Thanks in advance!
Thank you mate! Considerable lower price? I just check price on Anycubic store on Aliexress and price is very similar. Depending of country it can add more shipping cost. Make sure that you was looking in the same version like in this video (Linear plus version with Auto level). There is a lot of version of this printer. Some don't have auto level, Linear rails, Big power-supply, metal spool holder etc... This is the best version that you can get. And of course you can order it from Aliexpress directly from Anycubic store if you like. It's safe. Cheers :)
great vid have you had a chance to take a look at the FLSUN QQ ?
Fantastic Job. Great Review 👍
RON Thanks :)
Would you suggest Kossel plus or Mega i3 plus?
Excellent Review. Thanks.
Very good review! Thanks alot
Glad you like it :)