Another job well done. Keep up the good work. I just got myself a 2017 powerstroke and I have the harness on the fire wall rubbing against the ac line just like you showed in one of your videos. I enjoy learning from your vids. Thanks.
You do fantastic work. That took some real detective work to find the exact issue to avoid the same thing in the future. I hope that Ford gets your feedback so they can make changes to protect exposed wires on future models.
Takin my 2015 F250 in tomorrow for my apt for P24C7 , P0544 , and P2031 as well as 21E01 and 21M01 recall and CSP. Although the guy told me one of those isn’t valid anymore 🤷♂️ but I’ve got the platinum extended warranty jank so it’ll cost me $100 deductible even if it’s not. Oh plus my backup camera and proximity alerts failed completely and the cam seems to just be after it rains for couple of days. Already replaced the line from the frame to the camera through the tailgate and didn’t fix it so either the cam itself or the main line. At any rate, I’ll be in a loaner for awhile, but I’ve got an 8” BDS suspension lift so he won’t have too hard of a time underneath my girl lol
I had the bare copper wire on the sensor wire too presumably causing the MIL. I however was unable to unplug the 8 pin connector and instead pulled the sensor controller apart.
Hello my friend after the code p2201 pop up I toked the truck to the dealer and it was the nox sensor than they check again and said it only needed to be reprogram it is normal.?should I go ahead and change the sensor ? This is f 250 platinum 2013 60.000 miles power stroke thank you
I have this code coming up in my 2017 250. Bank 1. If I pull the sensor and clean the soot off it and try that before I replace the sensor what is safe to use to clean it? Can I use brake fluid? No signs of chaffed or corroded wires . Thanks in advance
PowerStroke Tech Talk w/ARod Ok what’s the pin point test? Haha? You have a video on that? It is what’s comes up as the code. I’ll get the number in a second.
Arod can you explain what the purpose is for each EGR sensor? I understand they measure exhaust temperature but what is the computer using each sensor for? Also how do you test NOx sensors? How do you force the exhaust system to have higher or lower NOx to test the accuracy and/or response of the sensor?
Arod, i have a 2018 F350 6.7 and have a P20EE code, dealer just did the TSB and about 20 miles later, the light came back on, I'm good at working on vehicles and wouldn't mind replacing the sensor myself, any idea where to start? I guess my question is, are all the sensors from bank 1 to 4? thanks!
That particular dtc requires a pcm update. I wld make sure you pcm and other modules are indeed updated. Those foolios may have missed a module. All those i get with that dtc is a reprogram. Did two last week same thing.
Mabye you could help me. Why on the cab and chassis does the exhaust go catalyst DPF SCR. But pickups go catalyst scr dpf. In my mind that’s bad idea your constantly getting wet spot for pickups.
I got bank 1 sensor out parameters on 19 f750 my brother has shop and computer I have warranty but I have 4 hour round trip I see parts geek has some for less than fuel for trip just wanted to be sure that’s what it is or should I run it to the dealer I just did nox sensor on ram 2 bank it’s not worth the down time if that’s all it is
Got a 2017 f350 and code P20EE bank 1 would it be the sensor 1 or sensor 2 that I would have to replace maybe it makes sense cuz I'm getting a bad smell when I leave my truck running for a bit. I would really appreciate your help and thanks in advance
Just watched this video, I have another code on my 2013 P220A, I had the truck straight piped and now with all the equipment back on, this is the only code that persists. The connectors are clean. What else should I check, can the sensor go bad just sitting in the exhaust for 3 years?
I have a p0170 code that the dealer can’t fix. I just got it back from them, they performed a “wiggle test” and found “lose wiring” cleared the code and sent me on my way. Light came back on 3 day of driving later.
would this be at all similar to a p2201? I'm getting that code but I can't seem to find much on it other than NOx sensor bank 1, so basically just doing the same thing you did here. I did check the wires though, I didn't see any rubbed through like that truck in the video
What are you doing to the Transit 3.2L that you have the CAC, CAC support, engine dress cover, A/C compressor, starter and coolant bottle removed from? The reason the cab and chassis trucks and pickups have the SCR mixer and DPF reversed is because Ford didn't want the DPF to be under whatever was to be upfitted to the chassis due to concerns of heat. Or so I was told.
Ewwww........I've done a couple jobs on these 3.2 Transits myself. Not many, but the few I've done is giving me a real sour taste in my mouth on these Transits real fast. Doing my first EGR cooler on one as I write this. No doghouse access.
I have a DTC that i clear and it returns the very next day. Been dealing with it for a few weeks now. Can you point me in the right direction? P22A7 NOx Sensor Heater Sense Circuit Range/Performance (Bank 1 Sensor 2)
Too much shit hanging under the truck, should be a 4 inch pipe from the turbo back. What happens when these trucks are out of warranty and you have to pay out of pocket to fix that 15,000 dollar exhaust system.
Diesels hit there prime. Thanks to the epa coming up with this garbage many people are going back to gas pickups. Who wants to pay for unnecessary repairs and down time when the emmisions shit craps out? All it accomplishes is problems not solving anything. With a clean tune and the low sulfur diesel you can pass emmisions no problem.
Another job well done. Keep up the good work. I just got myself a 2017 powerstroke and I have the harness on the fire wall rubbing against the ac line just like you showed in one of your videos. I enjoy learning from your vids. Thanks.
+Betts Pools thanks for remembering!! Glad ur learnin 😉😉
You do fantastic work. That took some real detective work to find the exact issue to avoid the same thing in the future. I hope that Ford gets your feedback so they can make changes to protect exposed wires on future models.
+M Cool thanks at least some1 appreciates me
Love your videos man I have learned so much Thanks to you !!! you always teach in a very understandable way !! keep them coming !!
Thanks buddy!!!
Thanks Man! Very well done video!
Thanks for the video man. Very in depth!
Wait till you see fridays
Takin my 2015 F250 in tomorrow for my apt for P24C7 , P0544 , and P2031 as well as 21E01 and 21M01 recall and CSP. Although the guy told me one of those isn’t valid anymore 🤷♂️ but I’ve got the platinum extended warranty jank so it’ll cost me $100 deductible even if it’s not. Oh plus my backup camera and proximity alerts failed completely and the cam seems to just be after it rains for couple of days. Already replaced the line from the frame to the camera through the tailgate and didn’t fix it so either the cam itself or the main line. At any rate, I’ll be in a loaner for awhile, but I’ve got an 8” BDS suspension lift so he won’t have too hard of a time underneath my girl lol
Hah just got my 16 cab and chassis f550 back for the exact same thing and it only has 14k! Great vid keep up the good work! 👍
+sportscarfan1989 no way!! Thanks
Cool stuff! Looks like at emissions have gotten crazy!
I changed the bank 1 sensor still not working? Pressure sensor problems ? Or fuse problems any help?
great vid down to business and spared the nonsense
Gee, thank you
I had the bare copper wire on the sensor wire too presumably causing the MIL. I however was unable to unplug the 8 pin connector and instead pulled the sensor controller apart.
Hello my friend after the code p2201 pop up I toked the truck to the dealer and it was the nox sensor than they check again and said it only needed to be reprogram it is normal.?should I go ahead and change the sensor ? This is f 250 platinum 2013 60.000 miles power stroke thank you
Yepp nox sensor
Id replace both...
@@PowerStrokeTechTalkwARod thank you I will support your Channel after the holidays
🙏🙏🙏🤝🤝🤝
I have this code coming up in my 2017 250. Bank 1. If I pull the sensor and clean the soot off it and try that before I replace the sensor what is safe to use to clean it? Can I use brake fluid? No signs of chaffed or corroded wires . Thanks in advance
Cant clean em. Gotta replace it. Id follow the pin point test b4 u replace because ive had other issues also cause that concern too....
PowerStroke Tech Talk w/ARod Ok what’s the pin point test? Haha? You have a video on that? It is what’s comes up as the code. I’ll get the number in a second.
P220A
PowerStroke Tech Talk w/ARod I’m trading the truck in a month or so. What can happen if I don’t replace the sensor?
PowerStroke Tech Talk w/ARod I’m trading the truck in a month or so. What can happen if I don’t replace the sensor?
Arod can you explain what the purpose is for each EGR sensor? I understand they measure exhaust temperature but what is the computer using each sensor for?
Also how do you test NOx sensors? How do you force the exhaust system to have higher or lower NOx to test the accuracy and/or response of the sensor?
You shld put this in an email...
Arod, i have a 2018 F350 6.7 and have a P20EE code, dealer just did the TSB and about 20 miles later, the light came back on, I'm good at working on vehicles and wouldn't mind replacing the sensor myself, any idea where to start? I guess my question is, are all the sensors from bank 1 to 4? thanks!
That particular dtc requires a pcm update. I wld make sure you pcm and other modules are indeed updated. Those foolios may have missed a module. All those i get with that dtc is a reprogram. Did two last week same thing.
Nice boots!
hello Is it necessary to replaced the module when you replaced the nox sensor? does anyone knows please...
I wld
hello again , when replacing the nox module is there a computer reprograming that is needs to be done? please let me know
Must be programmed in
Mabye you could help me. Why on the cab and chassis does the exhaust go catalyst DPF SCR. But pickups go catalyst scr dpf. In my mind that’s bad idea your constantly getting wet spot for pickups.
+Justin Taylor emissions and because of the cab configurations
2011 Ford 6,7L, I keep getting a P164A code , replaced nox multiple times , keeps coming back . Any suggestions?
Yea check TSB 15-0042.....
@@PowerStrokeTechTalkwARod thanks, is there an expiration date for this at the dealer?
No. Probably wouldn't be covered under warranty
regen
I have a 15 550 with a P2201 NOX. Sensor circuit range performance, Bank 1 Sensor 1. Have you seen this code with a failed sensor?
Prolly a leaking egr valve if its a cab chassis....
need help : 2011 ford 6.7 , installed new nox sensors, still a p164a code with .0009 volts , what causes this low voltage ?
Powerstroketechtalkwarod@gmail.com
@@PowerStrokeTechTalkwARod email sent
Responded!
PowerStroke Tech Talk w/ARod how do I change the no’s bank one sensor and where is locate
PowerStroke Tech Talk w/ARod code p2201. How do I change the no’s sensor bank one
I have a 16 F350 srw and code comes up knock sensor bank 6. Any ideas?
Did u follow the pinpoint test
I was told at Ford school that the SRC is flipped due to 4x4 transfercase clearance.
Hi, can you please help me out?
I do have code p2209, p2200,p220e for nox sensor bank1 sensor 1 and I'm looking where is located
Its the 1 i replaced. Did u watch tje video
I got bank 1 sensor out parameters on 19 f750 my brother has shop and computer I have warranty but I have 4 hour round trip I see parts geek has some for less than fuel for trip just wanted to be sure that’s what it is or should I run it to the dealer I just did nox sensor on ram 2 bank it’s not worth the down time if that’s all it is
Are all four EGT the same part number?
Yes
Got a 2017 f350 and code P20EE bank 1 would it be the sensor 1 or sensor 2 that I would have to replace maybe it makes sense cuz I'm getting a bad smell when I leave my truck running for a bit. I would really appreciate your help and thanks in advance
Pretty entailed pin point test. I would advise to push a few regens thru with a scan tool & re-evaluate post cleaning
The front and rear are different!. The front sensor has bigger openings than the rear, different part numbers too.
Are both NOX sensors the same part number?
No
Tks
Hey 'ol wise one.... Did you get a new tool cart? Did you trade in the Cornwell cart? (I thought I seen one in a past vid)
+klint duin lol yea, i crushed the corn holio one hahaha ill tell ya on the phone lolol
Just watched this video, I have another code on my 2013 P220A, I had the truck straight piped and now with all the equipment back on, this is the only code that persists. The connectors are clean. What else should I check, can the sensor go bad just sitting in the exhaust for 3 years?
No, you wouldn't think so...
Which NoX sensor is "sensor 1 bank 1" front of the dpf or rear of the dpf
looking for a good ford code reader, any suggestions?
IDS!!!
Hey bud, where are the o2 sensors located? 2017 6.7 f350
I have a p0170 code that the dealer can’t fix. I just got it back from them, they performed a “wiggle test” and found “lose wiring” cleared the code and sent me on my way. Light came back on 3 day of driving later.
Wow! Unreal....whats ur email yo
would this be at all similar to a p2201? I'm getting that code but I can't seem to find much on it other than NOx sensor bank 1, so basically just doing the same thing you did here. I did check the wires though, I didn't see any rubbed through like that truck in the video
Id be doin the pin point tests
@@PowerStrokeTechTalkwARod good point. I did find a tsb on it for 2017's so fingers crossed all it needs a pcm update
😬
Nice catch Bro.
+Paul Rodrigues thanks
Good find !!
Thanks bud, hope things are well?!!
I just checked mins, all good !!
I just did 1 today f550 again!
What are you doing to the Transit 3.2L that you have the CAC, CAC support, engine dress cover, A/C compressor, starter and coolant bottle removed from?
The reason the cab and chassis trucks and pickups have the SCR mixer and DPF reversed is because Ford didn't want the DPF to be under whatever was to be upfitted to the chassis due to concerns of heat. Or so I was told.
+Michael Chan had to replace a long block...
Ewwww........I've done a couple jobs on these 3.2 Transits myself. Not many, but the few I've done is giving me a real sour taste in my mouth on these Transits real fast. Doing my first EGR cooler on one as I write this. No doghouse access.
+Michael Chan private message me be4 u start!!!
Nice vid. How long did it take you to find that wire? Is it a common problem?
+bill beckett thanks, no not that common.
I have a DTC that i clear and it returns the very next day. Been dealing with it for a few weeks now. Can you point me in the right direction?
P22A7 NOx Sensor Heater Sense Circuit Range/Performance (Bank 1
Sensor 2)
Powerstroketechtalkwarod@gmail.com hope ya got venmo or Paypal.....🤷♂️
Is this a common problem with the knock sensor rubbing. Great video thanks
Not that much
Would you put some wire loom on to protect it in those areas that it rubbed through or secure it with zip ties, other?
+Ajc125kx yea i suppose you cld do that.
PowerStroke Tech Talk w/ARod Someone's up early lol
+Ajc125kx bout 2 leave fer more fun at the shop. Makin a bagel...mmmm
I'm dropping the kids off at the pool.
+Ajc125kx oooooo kerplunk...!
When does the DEF actually get injected. All the time? Only during regen?
+Arden Briggs private message me n well go over that
I don't have a utube channel
+Arden Briggs it doesnt matter if ya do, i responded to your private message yesterday evening...
so where do I see it
+Arden Briggs where do you see what??
Too much shit hanging under the truck, should be a 4 inch pipe from the turbo back. What happens when these trucks are out of warranty and you have to pay out of pocket to fix that 15,000 dollar exhaust system.
+Graveltrucking well two things, u towed it in, no fixy.....ull tow it right back out. Or fix it
searched one online, 2300 out the door, you install, I can hang with that
No doubt
Delete when warranty is up my problem is it’s 4 hours road trip but they gave me 10 back and 10 years on dpf filter
Way too much shit connected to an exhaust pipe..lol
New 1s are worse
Oh i believe it brother..
Diesels hit there prime. Thanks to the epa coming up with this garbage many people are going back to gas pickups. Who wants to pay for unnecessary repairs and down time when the emmisions shit craps out? All it accomplishes is problems not solving anything. With a clean tune and the low sulfur diesel you can pass emmisions no problem.
Why did you not repair it? It is designed to fail. they are in the parts business!!!
............
Hope ford paid for that one.
+Patrick S covered under emissions..
L low b 🙂
+George Smith HiEEEEEE bea