Это видео недоступно.
Сожалеем об этом.
How to make a
HTML-код
- Опубликовано: 1 авг 2019
- This is how I make photo carves with my cnc using photoVcarve software
8 inch
Y 6.2875
Z .75
Cutting parameters and tool i used are
Amana tool tapered ball nose #46282
Diameter 0.0313
Pass depth 0.022
Feed 100 inch/min
Plunge rate 100 inch/min
👉** Carving max depth 0.15 was used for This Carving.
However, Between 0.09 - 0.2 works as well... Good luck and try different settings. **👈
Line angle 45.0*
“ Check the cross hatch box “
rapid Clarence gap 0.25 inch
Please like and subscribe to our channel
Let me know how yours turns out in the Comment section below Thanks for Watching
If you would like to support my youtube channel Please visit my Patreon page @
www.patreon.co...
My website on ETSY @ www.etsy.com/s...
My Pattern website (Made By Etsy) @ www.LittleLaru...
Follow me on Instagram @ / little_larue_apiary_llc
Fackebook Page @ / littlelarueapiary
My RUclips Channel / beemanrobert
Thanks for Watching.
Please dont forget to subscribe to the channel and like this video
Thank You
Thank You for this video. I have been struggling in putting a photo in wood with photo carve. Happy New Year to you and Your family!!!
I've started to do better ones with VCarve Pro, And Aspire will be comming soon. Here is one I uploaded the other day.
ruclips.net/video/HufijV0W8Nk/видео.html
Looks great! What software did you use to convert the picture to gray scale? thanks.
You can use GIMP for converting. Its free and there's plenty of tutorials to explain it
I made it with Woodglut plans!