Thanks for the video. I am still struggling to get mine to work. I have upgraded all of the firmware. I can not get the drone bind option to work. My drone is the Nazgul with O3 I click the bind button on the drone but don't hear it click and no bind light are blinking. When I click my bind button on the v2 google it makes the binding noice.
Good timing on the video. I've got seven vistas and two air units, and I just rooted my goggles and put HD OSD with fancy fonts on all of them. Now I'm building my first 03 today. Ngl, I was heavily scrutinizing your video... You're a brave man to release any useful information on April 1st.. 😅✌🏻
I've seen somewhere that you can use the V2 goggles for video out on an iPad, android tablet and wondering how you get this to work. I can't for the life of me get this to work. Makes me wonder if goggles need updated for this? I'm on that 0606 firmware still. Thought i'd ask!
It’s funny you should say that, because I recorded this same situation during this video, but edited it out since it was somewhat irrelevant to the topic. The App is call DigiView. Its free and works on my goggles V2, both with my Original air unit and O3 air unit. I thought about making a video on it, but, i think others have already.
The FPV series Assistant software isn't available anymore. What should I do to get my V2's synced to 03. I have 2 x 03 drones, and have always used the Goggles 2 with them, and kept the V2s bound to my Avate, but I really do prefer the V2s so much better than the Goggles 2. & now my Goggles 2 have started turning themselves off (possible a cable issue) & it happened mid air the other day and resulted in ma crash of my GEPRC DoMain 3.6. I was able to trek through Mud and filth and find it, but if it happened over the water or further away, it will result in a lost drone. I've had fogging issues on Goggles 2 inner the start, and this new issue has made me finally had enough. I just want to use my Goggles V2 for the 03 drones now but I've just looked and the Assistant FPV series software is no longer available.
Hello and thank you for your videos! I am hoping you can help me out so I own both the V2 and goggles too and I have the original cameras and the 03 air unit cameras. I cannot get my V2 goggles to update to a version that allows me to switch it to FPV mode. I am using the FPV assistant I do the update and it says that I’m current. It is not the same version that you’re displaying in your video I’ve even tried doing a hard reset and then doing an update, and it still says that I am current, but it does not have the option in the settings to switch to FPV mode, therefore I cannot find with the 03 air unit. Is there something you can tell me that I’m doing wrong? You are the third RUclipsr that I have asked for help from and I’ve received no response. I’m happy to pay you for your time to get me up and going Let me know what that amount is and how to pay you. I just want to get this to work.
Doing updates on these goggles are VERY specific. You have to follow the tutorials(online/RUclips) step by step. The firmware version should not prohibit you from switching to FPV mode. A couple of things to note. (1)There are two versions of the DJI Assistant App. Make sure you are using the correct one. (2) In order for your V2 goggles to work with both the original VTX and O3 VTX, they(VTX) either need to be updated to the latest firmware(making the original VTX behave like an 03 Air Unit. Or you can Root/Hack the original VTX on older firmware, and keep the O3 on latest firmware(this option requires you to switch the googles between FPV mode and O3 mode for each respective VTX). If you need to revert your goggles to an older firmware, you can do so in the DJI assistant app, and there is usually one or two older firmware also listed. If that does not work, your last option would be to use the “Butter” firmware from the WTFOS website to “rollback” to an older firmware.
@@OneManUnmanned Thank you so much for this! I will print this out and keep it and try this tomorrow. I feel like I know that I am using the correct assistant for each platform. I am able to connect my goggles3 to the O3 AU. I was able to connect my goggles V2 to the older air units until I tried to update the older air units then my goggles V2 stopped working with the older air units and I have updated my goggles V2 to the current firmware but the option to switch to FPV mode is not there like I see in the video. again thank you so much for taking the time to type this out. I will print it and study and make sure that I'm doing. I'm doing everything correctly. Wishing you a wonderful rest of your day.
Thanks, very usefull! One question though. How do I enter the camera settings menu (for shutter time, etcetera) with the Goggles V2 when using O3 air unit? With the Goggles 2 it's "swipe up" The V2 has no swipe panel. Thanks!
good day sir.i have goggles v2 and im planning to buy 03 air unit, coz vista and original air unit hard limit is 13km,, is tbe 03 unit can pass over 13km,, ? like 24km?
I wonder if you can assist me with this problem. I have an 03 system and I have 2 off the old AIR UNITS. I have Goggles V2. On the Old Air units and my V1 goggles are on 01.00.06.08. All work great. My V2 Goggles are on 01.07.00.00 and work only with the 03. Even when I switch them from 03 to FPV/Digital etc. What firmware shoud the V2 Goggles be on to work with the old AIR UNIT and the 03. That way I can give my V1 Goggles to my son? Any help would be appreciated as I have gone to the field to fly and then realised "Darn, wrong drone or goggles" back home no flying.
Sorry if I missed it, but do you have to update all of your original vistas too for this to work across the board? And do you have to rebind when going from O3 to vista and vice versa? Thanks for the guide. I will come back to it when/if I get an O3 unit.
Good question.. For this to work with O3, you only have to update your O3 and Goggles. You can remain in your existing firmware with your original Air Units. On the other hand, you will have to rebind your goggles everytime you switch between the Original and newer O3 AirUnit. It is an inconvenience.
@@OneManUnmanned Appreciate the info. I was afraid that was how it was going to be. Maybe either DJI or WTFOS will make that easier at some point. Plus, I have the DJI FPV potato that has been hacked for no NFZ or altitude limit, so that might further complicate things for me if I go this route one day.
@@OneManUnmannedwell, I didn't make it as long as I thought I would and now have two 03 air units😁 Thanks again for this video as it made the transition smooth for me. And I didn't lose the altitude or nfz hacks on my DJI FPV drone either.
@@OneManUnmanned I only meant to get one, but promptly broke one of the ufl plugs when I took the antenna off to get it into a build. Sent it off to DJI and knew it would be a while before I got it back, so I bought another to finish the build. I will use the second one in the new betafpv whoop frame when I receive it. I modified my Crux35 frame and dropped it to 3" props for the first build. I am fine with only having them in small cinematic builds and keeping Vistas in the larger stuff that can carry a gopro. At least for now:>)
hello, congratulations for your videos because they are really beautiful and easy to follow !! Should I root the goggles, associate with O3 and then install the wtf packages with all my drones with old air units? every time you switch from O3 to old air units do you have to rebind and that's it or do you always install the WTF packages? thanks 😔🙏🏻
Yes, Every thing you said is correct. You should Root the goggles first, then update your goggles and air Unit so that they bind. Then install WTF and the associated Packages that you want on your goggles. Yes, you will have to re-bind every time you switch between the old and new Air Units. I have heard, the most recent firmware allows you to keep a bind in the O3 air unit, but not for the older style Air Units. I have not tested that firmware yet, but at least that's one less binding to do.
Perfect thank you, I did the root and installed all the packages. as soon as possible then I will do everything again and I really hope that future firmwares avoid having to bind the drones with air units. thanks again and keep it up 😎✌🏻
It's called the Nord5HD.. I've done a premium build using this frame and have a full review coming in a few weeks. ruclips.net/video/XlAcWgLRIoU/видео.html
Too much "about-around-maybe", honestly. This info could be served more efficiently pal. Still better then Bardwell, he uses 20min to say something that could be said in 1 minute :)Regards. JJ
Thanks, I was struggling to bind my Goggles V2 to my o3 air unit and this answered all my questions!
Thanks for the video. I am still struggling to get mine to work. I have upgraded all of the firmware. I can not get the drone bind option to work. My drone is the Nazgul with O3 I click the bind button on the drone but don't hear it click and no bind light are blinking. When I click my bind button on the v2 google it makes the binding noice.
Good timing on the video. I've got seven vistas and two air units, and I just rooted my goggles and put HD OSD with fancy fonts on all of them. Now I'm building my first 03 today.
Ngl, I was heavily scrutinizing your video... You're a brave man to release any useful information on April 1st.. 😅✌🏻
Haha, true..Others are making spoof videos. Maybe next year….
Can u still use older dji vtx'es on 1200 mw?
Yes
Great video! I wonder what app we need to update the controller?
can I turn off the osd display in the goggles 2 if I want a clean recording?
Great video, I notice you don’t have your antennas on your external module. Is this not bad.?
Technically it is acceptable since it’s a receiver and doesn’t transmit a signal.
I've seen somewhere that you can use the V2 goggles for video out on an iPad, android tablet and wondering how you get this to work. I can't for the life of me get this to work. Makes me wonder if goggles need updated for this? I'm on that 0606 firmware still. Thought i'd ask!
It’s funny you should say that, because I recorded this same situation during this video, but edited it out since it was somewhat irrelevant to the topic. The App is call DigiView. Its free and works on my goggles V2, both with my Original air unit and O3 air unit. I thought about making a video on it, but, i think others have already.
The FPV series Assistant software isn't available anymore.
What should I do to get my V2's synced to 03.
I have 2 x 03 drones, and have always used the Goggles 2 with them, and kept the V2s bound to my Avate, but I really do prefer the V2s so much better than the Goggles 2. & now my Goggles 2 have started turning themselves off (possible a cable issue) & it happened mid air the other day and resulted in ma crash of my GEPRC DoMain 3.6. I was able to trek through Mud and filth and find it, but if it happened over the water or further away, it will result in a lost drone.
I've had fogging issues on Goggles 2 inner the start, and this new issue has made me finally had enough. I just want to use my Goggles V2 for the 03 drones now but I've just looked and the Assistant FPV series software is no longer available.
Thanks for going through this effort and saving me some time not getting O3 OSD recordings!
Yeah, It’s the only downside of the V2 goggles at this time.
@@OneManUnmannedGreat Video. I just got a Nazgul and I wonder if that is still the case?
Hello and thank you for your videos! I am hoping you can help me out so I own both the V2 and goggles too and I have the original cameras and the 03 air unit cameras. I cannot get my V2 goggles to update to a version that allows me to switch it to FPV mode. I am using the FPV assistant I do the update and it says that I’m current. It is not the same version that you’re displaying in your video I’ve even tried doing a hard reset and then doing an update, and it still says that I am current, but it does not have the option in the settings to switch to FPV mode, therefore I cannot find with the 03 air unit. Is there something you can tell me that I’m doing wrong? You are the third RUclipsr that I have asked for help from and I’ve received no response. I’m happy to pay you for your time to get me up and going Let me know what that amount is and how to pay you. I just want to get this to work.
Doing updates on these goggles are VERY specific. You have to follow the tutorials(online/RUclips) step by step. The firmware version should not prohibit you from switching to FPV mode. A couple of things to note. (1)There are two versions of the DJI Assistant App. Make sure you are using the correct one. (2) In order for your V2 goggles to work with both the original VTX and O3 VTX, they(VTX) either need to be updated to the latest firmware(making the original VTX behave like an 03 Air Unit. Or you can Root/Hack the original VTX on older firmware, and keep the O3 on latest firmware(this option requires you to switch the googles between FPV mode and O3 mode for each respective VTX). If you need to revert your goggles to an older firmware, you can do so in the DJI assistant app, and there is usually one or two older firmware also listed. If that does not work, your last option would be to use the “Butter” firmware from the WTFOS website to “rollback” to an older firmware.
@@OneManUnmanned Thank you so much for this! I will print this out and keep it and try this tomorrow. I feel like I know that I am using the correct assistant for each platform. I am able to connect my goggles3 to the O3 AU. I was able to connect my goggles V2 to the older air units until I tried to update the older air units then my goggles V2 stopped working with the older air units and I have updated my goggles V2 to the current firmware but the option to switch to FPV mode is not there like I see in the video. again thank you so much for taking the time to type this out. I will print it and study and make sure that I'm doing. I'm doing everything correctly. Wishing you a wonderful rest of your day.
do you still need to press the pair button each time you switch to dji o3?
Unfortunately, you do.
Great video! I have subscribed!
Thanks, I appreciate that. 🙏
Thanks, very usefull! One question though. How do I enter the camera settings menu (for shutter time, etcetera) with the Goggles V2 when using O3 air unit? With the Goggles 2 it's "swipe up" The V2 has no swipe panel. Thanks!
Great video bro. I’ve watched so many and none mentioned about changing the menu to o3 air unit in the settings
Thanks..Glad the video helped.
How does the fcc hack work with v2 goggles and 03 unit.. I have a 03 unit and v2 goggles also
It does not work in conjunction with the O3 Air Unit. But if you rooted your goggles, you can easily use it with the original Ait units.
Nice video I had but dji sistem experience whit dji if you use the air unit 03 and vista air unit is a big head it when you tried to switch between
Yes, switching between the two requires a re-binding procedure. It kind of sucks, but don’t see DJI doing anything to fix it on the V2 goggles.
You explain this very well! Thank you!!
Thank you Joseph!
good day sir.i have goggles v2 and im planning to buy 03 air unit, coz vista and original air unit hard limit is 13km,, is tbe 03 unit can pass over 13km,, ? like 24km?
I wonder if you can assist me with this problem.
I have an 03 system and I have 2 off the old AIR UNITS. I have Goggles V2. On the Old Air units and my V1 goggles are on 01.00.06.08. All work great. My V2 Goggles are on 01.07.00.00 and work only with the 03. Even when I switch them from 03 to FPV/Digital etc. What firmware shoud the V2 Goggles be on to work with the old AIR UNIT and the 03. That way I can give my V1 Goggles to my son?
Any help would be appreciated as I have gone to the field to fly and then realised "Darn, wrong drone or goggles" back home no flying.
So what about the RC2. How to we bind that?
Sorry, I don’t own the RC2, so I don’t know how to do that.
Love your tutorial and just subscribed! Thanks a lot for sharing this!!
Thanks, I appreciate that! Glad the video helped.
Bro what do you do for a living I would love to know
Sorry if I missed it, but do you have to update all of your original vistas too for this to work across the board? And do you have to rebind when going from O3 to vista and vice versa? Thanks for the guide. I will come back to it when/if I get an O3 unit.
Good question.. For this to work with O3, you only have to update your O3 and Goggles. You can remain in your existing firmware with your original Air Units. On the other hand, you will have to rebind your goggles everytime you switch between the Original and newer O3 AirUnit. It is an inconvenience.
@@OneManUnmanned Appreciate the info. I was afraid that was how it was going to be. Maybe either DJI or WTFOS will make that easier at some point. Plus, I have the DJI FPV potato that has been hacked for no NFZ or altitude limit, so that might further complicate things for me if I go this route one day.
@@OneManUnmannedwell, I didn't make it as long as I thought I would and now have two 03 air units😁 Thanks again for this video as it made the transition smooth for me. And I didn't lose the altitude or nfz hacks on my DJI FPV drone either.
Wow, two O3 Air Units? That's pretty good. I'm still using one O3 and one Vista. I do want another O3 since it's performing very well.
@@OneManUnmanned I only meant to get one, but promptly broke one of the ufl plugs when I took the antenna off to get it into a build. Sent it off to DJI and knew it would be a while before I got it back, so I bought another to finish the build. I will use the second one in the new betafpv whoop frame when I receive it. I modified my Crux35 frame and dropped it to 3" props for the first build. I am fine with only having them in small cinematic builds and keeping Vistas in the larger stuff that can carry a gopro. At least for now:>)
hello, congratulations for your videos because they are really beautiful and easy to follow !! Should I root the goggles, associate with O3 and then install the wtf packages with all my drones with old air units? every time you switch from O3 to old air units do you have to rebind and that's it or do you always install the WTF packages? thanks 😔🙏🏻
Yes, Every thing you said is correct. You should Root the goggles first, then update your goggles and air Unit so that they bind. Then install WTF and the associated Packages that you want on your goggles. Yes, you will have to re-bind every time you switch between the old and new Air Units. I have heard, the most recent firmware allows you to keep a bind in the O3 air unit, but not for the older style Air Units. I have not tested that firmware yet, but at least that's one less binding to do.
Perfect thank you, I did the root and installed all the packages. as soon as possible then I will do everything again and I really hope that future firmwares avoid having to bind the drones with air units. thanks again and keep it up 😎✌🏻
Hi. After i updated the v2 to 01.04, my old drones with caddx vista is not showing video anymore. Do i have to rebind it?
What if you don't have the option under Setting/About to switch a/c models? All I have is Rest All at the very bottom
thanks for the info subscribed to your channnel thank you
Thanks very much..I appreciate it.
What frame is that?
It's called the Nord5HD.. I've done a premium build using this frame and have a full review coming in a few weeks.
ruclips.net/video/XlAcWgLRIoU/видео.html
For anyone using v2 with O3, how's the image quality like? I heard its notably worse than using goggles 2 with O3.
I don’t own the Goggles2, but my image quality is fine. Hopefully someone else can chime in.
Thanks.
Thank You Timothy
Just don't want to lose my wtfos
i don’t have o3 option….
Jidion's older cousin, PreDion.
Too much "about-around-maybe", honestly. This info could be served more efficiently pal. Still better then Bardwell, he uses 20min to say something that could be said in 1 minute :)Regards. JJ
Thanks, I appreciate it, and the feedback.
Lol bartwell can't shut up,??
thats fpv v2 goggle... get your shit right