This RUclips needs to be linked to every FPV sales site that deals with DJI gear.. I just had a world of issues trying to rebind my gogs with my caddx units, wishing I had seen this first. Thank you for making it very clear on what works, and what doesn't work with, which which version of software
This is exactly the info I was looking for. I loved how he had all the air units, goggles, and controllers as props to keep everything he’s explaining clear. Great job, Ian!!!
what a short video cause I had assumed it would be far longer so you must have done a very good job in nailing it in a short way. Chapeau ! Well done .
While confusing, I think its pretty dam good the new goggles and controller 2 work with all past units and you can still get the old hacks working, you can’t expect full compatibility with everything moving forward, seems like they have maxed out what’s compatible with hardware being the limiting factor and why it is like it is, with so many different hardware combos it’s going to be a little confusing trying to get compatibility, I’m sure there’s some things that could be better, how would you like the mess tidied up? We wanted new smaller Fatshark type goggles and got them, tho not perfect I think dji have done pretty Well to accommodate the many requests and wants of so many, of course there’s always things that could be better, but I’ve never been happier flying digi that i ever was on analog.
@@MadRC Hello. I have DJI FPV and Geprc Mark 5 with O3 system. The idea was use both drones with same goggles and controller ( you switch in Settings > About > Switch Aircraft Model ). I just did it for the first time. I mean I was flying for weeks with my new Geprc, but I wanted to film a cinematic shot on N mode so today I went with DJI FPV. I turned on everything, went to option to switch it up, restarted the goggles and the drone just won’t work. I have “image transmission lost” and the screen is just black with no indicators, nothing. Why? How do I switch back to DJI FPV now if I want to use it?
you saved my sanity, i upgraded the air unit not checking to see if it is the same as the googled, and of course they did not bind, until i saw your video, thanks man..!
Thanks! I'll be downgrading my v2 googles (after I just upgraded) in order to use my vista nebulas on 5 previously built quads. . Do I also need to downgrade my DJI FPV (that I also just upgraded) in order to use my v2 googles with it? Thank you.
Great video & very informative but wow what a mess. I recently upgraded my V2 goggles to the latest firmware along with a new air unit I purchased but now my old DJI remote won't work, I then downgraded the air unit back to vol.00.0608 to match my radio but I can't seem to downgrade my goggles. Is there something I can do or am I having to purchase the new DJI radio? Thank you & I look forward to any advice you can give me, this is so frustrating.
Excellent explanation 👌. BUT these firmwares are really frustrating 😑 lots of people that started in our hobby. It's a deterrent to many people. Lots of folks r not computer savvy.
Your title is very correct! It is definitely a firmware mess... rather than getting new models every few months nowadays, not once a year like before, they should take care for making it a bit easier with the firmware and think things through. Really terrible! But thanks to your video, I might be able to make my v2 goggles work with my vista and my o3...
Mads back to the FPV again and I did upgrade and I'm glad you got it looked at your video I was having kittens trying to get this to work. I'm still on version one Googles not planning to change so thanks very much that was very helpful as I download 0608 and it works! 👍. Does 0608 support canvas mode on BF? I use XFire and LQ would be very handy .....if you know ? Cheers mate
Hi, thanks for the clarifications, if I may, I have a question: say I have the old Dji Goggles V2 and perform the upgrade to the latest version in order to use them with O3 air units, will I still be able to use those Goggles together with the DJI FPV drone and it's original controller?
Bit late in the game but I’ve bound an unused original air unit to my v2 goggles but have no video signal just battery voltage , does this sound like a problem we out the unit or am a missing a step ?? Thank you
Thank you for your help once again mate. I'm astonished that after 6 months they still have not resolved the loosing the binds issue. I have the v2 but don't want to take apart quads to get them rebound again. I thought this long on, they would have sorted this out lol. Blooming DJI :(
Do I even need the DJI remote or can I just run V2s with the vista/ air unit light and my Radio Master controller? I just bought the Night Eagle HD and would like to use it with the goggles V2.
Briliant Ian, My problem is as i have fw 0606 on my v2 goggles and matching on the air unit, after replacing the fc stack i get no further transmission (black) and 'transmission signal stopped' shown. Everything worked perfectly before with the 2 hacks.. Any advice or solutions desperately needed..cheers Ian
I just purchased a drone with the RunCam Link Wasp. Is it still so that I will have to activate it via the old DJI Assistant 2 (FPV Series)? Then I can upgrade to the latest firmware with the Consumer Drone Series? I am using Integra goggles.
So I just got a cadxx vista for the first time, I already had an 03, which I had working perfectly fine, but now I can't bind the vista, so is there a firmware that will let me use my 03 and the vista, or I have to downgrade the v2 and the vista software to earlier firmwares, and lose compatibility with the 03 or...I'm so confused.
I've had the WTFOS installed on my V2s and they are rooted, can I use the V2s with the Caddix Vista air units if I had to update the DJI side to use my Avata? I did the update to the latest (Yesterday) and I was able to just put the WTFOS and packages back on the DIY side and all seems good.
Good day mate I can get my remote to work on the latest firmware but not goggles if I upload if I upload the 0608 firmware the goggles work but not the controller. Can ya help me out? Thanks. Mark
Great videos sir. I have 4 quads running Vista's, with the v1 goggles and v1 RC, as well as the DJI FPV and Avata (with Goggles v2). Due to the complexity of the firmware between goggles, air units, and RC, it's simply easier to not bother trying to get compatibility, and just use the old rc and goggles with the old vistas. And if I put on my scepticism hat, DJI is ok with the mess, as it encourages users to just buy the newer system. Eventually, the v1 stuff becomes dust collectors, which is such a shame since it's still an amazing FPV system.
If you use the V2 goggles with Avata and remote 2, is it possible to also use the v2 goggles with a vista drone without changing the goggles firmware? That's what is slightly confusing to me.
God... so helpful. Hwy does it have to be SUCH a mess with all of this?! I am going to update my goggles V2 now and hope to still be able to use my caddy vista as well as my O3.
I’ve got a question.. i’ve updated the goggles 2 and my Dji transmitter 2 to the latest firmware versions. The goggles and the transmitter are binding to the O2 Vista unit that has also been upgraded to the latest version. Everything works, except for the transmitter is not seen in beta flight at all, and it will not arm the drone.. What am I missing??
I recently came back to the hobby with my gen 1 goggles and thought it was a good idea to update everything first and tried to bind them for +1h before finding this video. There should be a message in the DJI Assistant or at least in the FAQ on the DJI site. Its also possible there is one and iam just blind. Thx for the video!
Thank you for the clear explanation. Regarding the bind with goggles 2 and grey controller 2 and Air unit O3 it works well, instead I'm loosing the bind with the Avata, and vice versa, if i bind my Avata I'm loosing the bind with the 03, I have to bind again each time I switch between O3 and Avata, tiring....😭 Any suggestion on how to solve that issue? Thank you again.
@@MadRC Thanks! I just downloaded it and tried upgrading the firmware on the vista but it gets to 99% and gets stuck for 10 minutes doing nothing. I’ve tried it 3 times and it never completes the download. Any ideas?
@MadRC hi, a couple of friends all fly with latest Googles and remote 2, some have no problem, 3 have random rx loss followed by failsafe at just a couple of meters away. Do you have any idea why this could be happening ? All using latest firmware. Tjs
Great useful stuff! But I have a problem. My V2 Goggles are stuck in HD Air Unit mode with no option on the Settings/Device menus to switch back and forth between modes. I can still fly all of my digital quads, but I can’t get to FPV mode to update the firmware so I can bind to my brand new 03 air unit. Got a fix or any ideas. Much appreciated.
in my experience the v2s have better range with vista and air unit when i update firmware to bind vista/air unit with goggles 2 the range is far less but googles 2 with 03 has great range
wish i had seen this a few weeks ago. got an O3 at a killer price and decided to install it into a new 7" build, finding out this binding issue now =/ luckily the O3 in my build is very easily accessible to rebind each time if/when i go fly it...ill take the WTF hack for now...BUT if this was in a different quad where it wasnt an easy push of the button id def have even more bitter "feels" =/
Hi Great video. Thank you! I have V2 googles and several vistas with the fcc hack. I did not root the googles but i will do now. I wait for Ifligh AOS 6s with 03 air unit I wonder in my case how should i proceed with the fcc, root and the new 03 I will need max power to all of my guads and if i switch from vista to 03 and lose every hack it will be really annoying What can you recomend me how should i proceed
Maybe i missed it, but.. If i upgrade a vista to the latest “O3” firmware, could i use it on the v2 goggles in O3 mode? Then you don’t need to switch modes and lose your bind every time you go from a O3 to a vista or the Avata.
No when you update to that V01.01 firmware it’s only for Giggles 2. It does not work with V2 in O3 mode as it’s not quite the same as O3. I call it O3 firmware but it’s not the same.
When I try to update to the latest firmware for goggle 2, it gets locked up at 99%, and then goes to retry update. Retied a dozen times and just gets stuck and doesn’t go to upload 100% and completed. Any way to get this to load. Just bought the unit and initial set up. Thanks.
How about the antenna situation with the goggles 2 (linear antenna) so I thought it is just perfect with the o3 antenna. So if we use the vista or the Air Unit then we have worse signal then in the goggles v2 because antenna mismatch right? Can we use a o3 antenna on the vista(?i just wonder which one of the both ufl connectors to connect) because I need my vistas still vor long range and don’t want to have negative sideeffects when using the DJI goggles 2 (switched to goggles 2 because of OSD recording mainly)
It’s not even worth worrying about unless you fly completely flat and level continually. Remember the goggles are MIMO and have antennas at different angles as well.
But the FCC 1200mw mode is only allowed by the location where your goggles is, the firmware will be update when u move to another country and follow the local law(for E.X: China Mainland is SRRC 700mw)
OK. I had my DJI Goggles V2 Bound to Protek25 Cadxx Vista V01.00.608. Then I upgraded Goggles V2 to latest firmware so I can bind to Avata. Now I cannot re-bind to Protek25. What firmware version of Goggles V2 do I need to be able to connect both to Caddx Vista and New DJI 03 AIR unit?
It should work in all versions. You need to select the correct mode from the About Screen. The option to change may be below the last option shown. So go into settings, general and about. And scroll down.
I got it to bind! back to Caddx Vista. Just had to SWITCH TO DJI FPV Mode. (did not power cycle DUH). Thank you for taking time to explain. Great channel just subscribed.
OK. I will go back to the latest version of the Goggles V2 Firmware and try it again (I had downgraded to the oldest version available and got it working) I was just probably doing something wrong in the sequence. I do know what version of the V2 Firmware works now so I can always go back if the latest Goggle V2 firmware does not work. Thanks again.@@MadRC
Hi buddy, I bound the dji fpv goggles V2 with the caddx by downgrade the firmware of caddx but couldn't bind it with dji fpv remote control 2. Plz help
Please please please v1 air unit set firm to v01.00.0608 goggles set to V01.00.0607 like you stated but what firmware for the version one controller that went with the v1 air unit
Not sure really where to start with all this crap but I’m going to try I have dji v2 goggles caddx vista nebula pro for the camera set up so the other day had an issue with the camera sent it back. They gave me a brand new one same camera and transmitter you would think you put it back in the aircraft and bind it to the goggles and you’re good to go, but with me not so good with computers I wish I would’ve left the same firmwear in my goggles, but I didn’t while I was waiting for the camera to come into the mail. I downloaded the latest firmware to the goggles, which is the beginning to all of my problems and frustrations. when I first hooked everything up, I did get the camera and the goggles to bind and I video but the goggles was not recording I had it set up in the goggles so when you first turned it on it started to record so it wasn’t doing that. so you get out and you watch all of these videos such as yours and realize certain firmware in the goggles won’t work with this camera. Long story short now I have no video nothing power to the camera no problem green light comes on and that’s it. The firmware that you mentioned in this video I do not see it on my computer when I go to that website either one of them. (Fpv series.) or ( consumer drone series) I heard something about a new update for DJI assist. Not sure what that’s all about but right now I don’t know which way to turn. I tried DJI support and that was such a freaking joke. Maybe you know what direction I need to go in to get this matter resolved. I really would appreciate some help, thanks Steve
O have a question about my DJI FPV goggle V2 with 03 system. Cuz I'm showing it's at 30 to 33 Mbps instead of 50.8 mbps, what can i do to get 50.8 mbps back?? My dual antenna is in very good condition, nothing wrong with antenna, i have checked the antennas 3 times, but nothing wrong with antennas, i don't get it why I'm showing the 30 to 33 Mbps instead of 50.8 Mbps. Can you help me, please, Ian?? Cuz i have tried asked other drone FPV pilots like Nick Burns and he have no clue why I'm showing 30 to 33 Mbps on DJI FPV goggle V2 with 03 HD system and it's driving me crazy to see 30 to 33 Mbps. But when i switched back to Vista and original Air Unit system, they are showing me perfectly at 50.8 mbps. I don't get it, can you please help, Ian?? This is driving me crazy 🤯.... Could it be from firmware bug???
@@MadRC yes sir, it will recording immediately once armed. And I have tried downgraded or upgraded and even reflash firmware, but nothing seems work. That when other FPV pilots are saying same thing that's really strange, cuz they don't have that issue but only me, that's why it's driving me nuts, sighs....
@@MadRC plus I did try changed to 25 Mbps, then when I use the 25 Mbps, it went down to about 14 to 18 Mbps. Then I went back to 50.8, but it showing me 30 to 33 Mbps. Man I don't get it. Others are saying it might be firmware bug, could it be??
@Mads Tech ohh okay thank you. I was a little confused. I thought fpv air unit meant it would work with the fpv drone. Will there be an update that will make it truly backward compatible ??
This is terrible! why is the controller 2 compatible with the caddx.. but ONLY if you have the goggles 2 and not the goggles v2? My brain is not compatible to this logic!
@@chedil08 yeah, but after the introduction of the DJI FPV drone. I wanted to try it for myself. And now I have the goggles... I'll probably get hdzero one day. But then again. The range isn't great.
If you ever wondered if DJI was for making a dollar, giving a damn or making a difference we have our answer. As they continue adding more incompatible crap, this stinks when you spend all day working on something you think you did wrong that was simply a result of piss poor planning by a corporation. They should have let the hobby develop organically with time developed support if they were not gonna at least add consistency along the way. Sell the branch off to the hobbyists!! I'm sure you have enough other stuff in development.
4 minutes in and im lost as can be... I would need u to not throw so much shit at us all... if u do this then that. but if u don't then this will happen but only under the conditions of 000 being 0010 and 01010 to 001 and with the change to 000110 nothing will work and 000.1 now we are fractional and infinity and beyond!
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
This RUclips needs to be linked to every FPV sales site that deals with DJI gear..
I just had a world of issues trying to rebind my gogs with my caddx units, wishing I had seen this first.
Thank you for making it very clear on what works, and what doesn't work with, which which version of software
1 year later and this video is still helping us out!
This is exactly the info I was looking for. I loved how he had all the air units, goggles, and controllers as props to keep everything he’s explaining clear. Great job, Ian!!!
Glad I could help! Thank for the kind feedback and I massively appreciate the donation.
is this still a thing? i just got my vista and i dont want to mess things up
@@notso_sober this is still valid
what a short video cause I had assumed it would be far longer so you must have done a very good job in nailing it in a short way.
Chapeau ! Well done .
DJI needs to watch this so they know just how MESSED UP their compatibility logic is.
Yea it’s a total crap show Ken.
While confusing, I think its pretty dam good the new goggles and controller 2 work with all past units and you can still get the old hacks working, you can’t expect full compatibility with everything moving forward, seems like they have maxed out what’s compatible with hardware being the limiting factor and why it is like it is, with so many different hardware combos it’s going to be a little confusing trying to get compatibility, I’m sure there’s some things that could be better, how would you like the mess tidied up? We wanted new smaller Fatshark type goggles and got them, tho not perfect I think dji have done pretty Well to accommodate the many requests and wants of so many, of course there’s always things that could be better, but I’ve never been happier flying digi that i ever was on analog.
@@MadRC Hello. I have DJI FPV and Geprc Mark 5 with O3 system. The idea was use both drones with same goggles and controller ( you switch in Settings > About > Switch Aircraft Model ). I just did it for the first time. I mean I was flying for weeks with my new Geprc, but I wanted to film a cinematic shot on N mode so today I went with DJI FPV. I turned on everything, went to option to switch it up, restarted the goggles and the drone just won’t work. I have “image transmission lost” and the screen is just black with no indicators, nothing. Why? How do I switch back to DJI FPV now if I want to use it?
They use this video for training their employees I bet
you saved my sanity, i upgraded the air unit not checking to see if it is the same as the googled, and of course they did not bind, until i saw your video, thanks man..!
Thanks! I'll be downgrading my v2 googles (after I just upgraded) in order to use my vista nebulas on 5 previously built quads. . Do I also need to downgrade my DJI FPV (that I also just upgraded) in order to use my v2 googles with it? Thank you.
Great video & very informative but wow what a mess. I recently upgraded my V2 goggles to the latest firmware along with a new air unit I purchased but now my old DJI remote won't work, I then downgraded the air unit back to vol.00.0608 to match my radio but I can't seem to downgrade my goggles. Is there something I can do or am I having to purchase the new DJI radio? Thank you & I look forward to any advice you can give me, this is so frustrating.
Hello do you know wich version of firmware I need to use on my Googles v2 to connect them to my caddx vista ?
Excellent explanation 👌. BUT these firmwares are really frustrating 😑 lots of people that started in our hobby. It's a deterrent to many people. Lots of folks r not computer savvy.
Your title is very correct! It is definitely a firmware mess... rather than getting new models every few months nowadays, not once a year like before, they should take care for making it a bit easier with the firmware and think things through. Really terrible! But thanks to your video, I might be able to make my v2 goggles work with my vista and my o3...
Mads back to the FPV again and I did upgrade and I'm glad you got it looked at your video I was having kittens trying to get this to work. I'm still on version one Googles not planning to change so thanks very much that was very helpful as I download 0608 and it works! 👍. Does 0608 support canvas mode on BF? I use XFire and LQ would be very handy .....if you know ? Cheers mate
Hi, thanks for the clarifications, if I may, I have a question: say I have the old Dji Goggles V2 and perform the upgrade to the latest version in order to use them with O3 air units, will I still be able to use those Goggles together with the DJI FPV drone and it's original controller?
Bit late in the game but I’ve bound an unused original air unit to my v2 goggles but have no video signal just battery voltage , does this sound like a problem we out the unit or am a missing a step ??
Thank you
Thank you for your help once again mate. I'm astonished that after 6 months they still have not resolved the loosing the binds issue. I have the v2 but don't want to take apart quads to get them rebound again. I thought this long on, they would have sorted this out lol. Blooming DJI :(
Do I even need the DJI remote or can I just run V2s with the vista/ air unit light and my Radio Master controller? I just bought the Night Eagle HD and would like to use it with the goggles V2.
Briliant Ian,
My problem is as i have fw 0606 on my v2 goggles and matching on the air unit, after replacing the fc stack i get no further transmission (black) and 'transmission signal stopped' shown.
Everything worked perfectly before with the 2 hacks..
Any advice or solutions desperately needed..cheers Ian
Does the O3 also have the stop record - slow SD issue?
No
do you meant that issue in the goggles v2? because i have this with goggle recording all the time with my v2s
@@FreshPanda97 Yes exactly, no idea what to do about it.
I just purchased a drone with the RunCam Link Wasp. Is it still so that I will have to activate it via the old DJI Assistant 2 (FPV Series)? Then I can upgrade to the latest firmware with the Consumer Drone Series? I am using Integra goggles.
So I just got a cadxx vista for the first time, I already had an 03, which I had working perfectly fine, but now I can't bind the vista, so is there a firmware that will let me use my 03 and the vista, or I have to downgrade the v2 and the vista software to earlier firmwares, and lose compatibility with the 03 or...I'm so confused.
I've had the WTFOS installed on my V2s and they are rooted, can I use the V2s with the Caddix Vista air units if I had to update the DJI side to use my Avata? I did the update to the latest (Yesterday) and I was able to just put the WTFOS and packages back on the DIY side and all seems good.
Cheers Mate! I was going freaking insane.
Hi Mads can you point me in right direction for FCC ?for my dji fpv quad? Im in Spain and need more range Ive got the V2 goggles with it
Good day mate I can get my remote to work on the latest firmware but not goggles if I upload if I upload the 0608 firmware the goggles work but not the controller. Can ya help me out? Thanks.
Mark
@Mads Tech, did you say that the goggles is compatible with the DJI Avata at 4:30?
Yes Avata I s supported in V2, Goggle 2 and Integra
@@MadRC Wow thank you!
Great videos sir. I have 4 quads running Vista's, with the v1 goggles and v1 RC, as well as the DJI FPV and Avata (with Goggles v2). Due to the complexity of the firmware between goggles, air units, and RC, it's simply easier to not bother trying to get compatibility, and just use the old rc and goggles with the old vistas. And if I put on my scepticism hat, DJI is ok with the mess, as it encourages users to just buy the newer system. Eventually, the v1 stuff becomes dust collectors, which is such a shame since it's still an amazing FPV system.
If you use the V2 goggles with Avata and remote 2, is it possible to also use the v2 goggles with a vista drone without changing the goggles firmware? That's what is slightly confusing to me.
God... so helpful. Hwy does it have to be SUCH a mess with all of this?!
I am going to update my goggles V2 now and hope to still be able to use my caddy vista as well as my O3.
I’ve got a question.. i’ve updated the goggles 2 and my Dji transmitter 2 to the latest firmware versions. The goggles and the transmitter are binding to the O2 Vista unit that has also been upgraded to the latest version. Everything works, except for the transmitter is not seen in beta flight at all, and it will not arm the drone..
What am I missing??
I recently came back to the hobby with my gen 1 goggles and thought it was a good idea to update everything first and tried to bind them for +1h before finding this video.
There should be a message in the DJI Assistant or at least in the FAQ on the DJI site. Its also possible there is one and iam just blind.
Thx for the video!
Any update on the binding issue yet? No good fix yet?
Thanks for all the info, Ian!!! 😊
Stay safe there with your family! 🖖😊
My 03 air unit walnt even go into bind mode when I hit the button. Any thoughts?
Thank you for the clear explanation.
Regarding the bind with goggles 2 and grey controller 2 and Air unit O3 it works well, instead I'm loosing the bind with the Avata, and vice versa, if i bind my Avata I'm loosing the bind with the 03, I have to bind again each time I switch between O3 and Avata, tiring....😭
Any suggestion on how to solve that issue? Thank you again.
There is no DJI assistant 2 on the App Store. Am i missing something?
You have to download it from DJI website for your pc
@@MadRC Thanks! I just downloaded it and tried upgrading the firmware on the vista but it gets to 99% and gets stuck for 10 minutes doing nothing. I’ve tried it 3 times and it never completes the download. Any ideas?
@@SuperheroArmorychannel are you using PC or Mac
@@MadRC A Mac laptop. The assistant 2 detects the vista and seems to download but always gets stuck at 99%.
I have the same problem / issue, anyway to get it to upload. Thanks.
My O3 won't bind to my V2 goggles but they did before, I haven't changed anything like firmware or crashed. Any suggestions?
@MadRC hi, a couple of friends all fly with latest Googles and remote 2, some have no problem, 3 have random rx loss followed by failsafe at just a couple of meters away. Do you have any idea why this could be happening ? All using latest firmware.
Tjs
Great useful stuff! But I have a problem. My V2 Goggles are stuck in HD Air Unit mode with no option on the Settings/Device menus to switch back and forth between modes. I can still fly all of my digital quads, but I can’t get to FPV mode to update the firmware so I can bind to my brand new 03 air unit. Got a fix or any ideas. Much appreciated.
Got the same issue as you, do you perhaps solved this issue?pls let me know, would be much appreciated!
in my experience the v2s have better range with vista and air unit when i update firmware to bind vista/air unit with goggles 2 the range is far less but googles 2 with 03 has great range
wish i had seen this a few weeks ago. got an O3 at a killer price and decided to install it into a new 7" build, finding out this binding issue now =/ luckily the O3 in my build is very easily accessible to rebind each time if/when i go fly it...ill take the WTF hack for now...BUT if this was in a different quad where it wasnt an easy push of the button id def have even more bitter "feels" =/
What firmware version i need on v2 goggles to bind in vista air unit? Thanks
Hi
Great video. Thank you!
I have V2 googles and several vistas with the fcc hack.
I did not root the googles but i will do now.
I wait for Ifligh AOS 6s with 03 air unit
I wonder in my case how should i proceed with the fcc, root and the new 03
I will need max power to all of my guads and if i switch from vista to 03 and lose every hack it will be really annoying
What can you recomend me how should i proceed
Should i put the 2 hacks in the V2 googles?
Is rooting affects the fcc hacks?
Maybe i missed it, but..
If i upgrade a vista to the latest “O3” firmware, could i use it on the v2 goggles in O3 mode?
Then you don’t need to switch modes and lose your bind every time you go from a O3 to a vista or the Avata.
No when you update to that V01.01 firmware it’s only for Giggles 2. It does not work with V2 in O3 mode as it’s not quite the same as O3. I call it O3 firmware but it’s not the same.
When I try to update to the latest firmware for goggle 2, it gets locked up at 99%, and then goes to retry update. Retied a dozen times and just gets stuck and doesn’t go to upload 100% and completed. Any way to get this to load. Just bought the unit and initial set up. Thanks.
How about the antenna situation with the goggles 2 (linear antenna) so I thought it is just perfect with the o3 antenna. So if we use the vista or the Air Unit then we have worse signal then in the goggles v2 because antenna mismatch right? Can we use a o3 antenna on the vista(?i just wonder which one of the both ufl connectors to connect) because I need my vistas still vor long range and don’t want to have negative sideeffects when using the DJI goggles 2 (switched to goggles 2 because of OSD recording mainly)
It’s not even worth worrying about unless you fly completely flat and level continually. Remember the goggles are MIMO and have antennas at different angles as well.
@@MadRC i fly flat long range not high up in the sky...always close to the ground because this is what gives me joy
But the FCC 1200mw mode is only allowed by the location where your goggles is, the firmware will be update when u move to another country and follow the local law(for E.X: China Mainland is SRRC 700mw)
2024 allmost 2025 and I still need this :) thnx again Ian.
OK. I had my DJI Goggles V2 Bound to Protek25 Cadxx Vista V01.00.608. Then I upgraded Goggles V2 to latest firmware so I can bind to Avata. Now I cannot re-bind to Protek25. What firmware version of Goggles V2 do I need to be able to connect both to Caddx Vista and New DJI 03 AIR unit?
It should work in all versions. You need to select the correct mode from the About Screen. The option to change may be below the last option shown. So go into settings, general and about. And scroll down.
I got it to bind! back to Caddx Vista. Just had to SWITCH TO DJI FPV Mode. (did not power cycle DUH). Thank you for taking time to explain. Great channel just subscribed.
OK. I will go back to the latest version of the Goggles V2 Firmware and try it again (I had downgraded to the oldest version available and got it working) I was just probably doing something wrong in the sequence. I do know what version of the V2 Firmware works now so I can always go back if the latest Goggle V2 firmware does not work. Thanks again.@@MadRC
Thank you!! This helped tremendously.
Hi buddy, I bound the dji fpv goggles V2 with the caddx by downgrade the firmware of caddx but couldn't bind it with dji fpv remote control 2. Plz help
Please please please v1 air unit set firm to v01.00.0608 goggles set to V01.00.0607 like you stated but what firmware for the version one controller that went with the v1 air unit
Is there a fpv goggle that is compatible with ALL the different HD camera/transmitter units?
Nope. Not possible. You can use HDZero with Avatar with the VRX module but DJI has no option for this. They are all proprietary systems
That's all we want to know. Thanks for the video!!
Very well done! Thanks for all you do!
Not sure really where to start with all this crap but I’m going to try I have dji v2 goggles caddx vista nebula pro for the camera set up so the other day had an issue with the camera sent it back. They gave me a brand new one same camera and transmitter you would think you put it back in the aircraft and bind it to the goggles and you’re good to go, but with me not so good with computers I wish I would’ve left the same firmwear in my goggles, but I didn’t while I was waiting for the camera to come into the mail. I downloaded the latest firmware to the goggles, which is the beginning to all of my problems and frustrations. when I first hooked everything up, I did get the camera and the goggles to bind and I video but the goggles was not recording I had it set up in the goggles so when you first turned it on it started to record so it wasn’t doing that. so you get out and you watch all of these videos such as yours and realize certain firmware in the goggles won’t work with this camera. Long story short now I have no video nothing power to the camera no problem green light comes on and that’s it. The firmware that you mentioned in this video I do not see it on my computer when I go to that website either one of them. (Fpv series.) or ( consumer drone series) I heard something about a new update for DJI assist. Not sure what that’s all about but right now I don’t know which way to turn. I tried DJI support and that was such a freaking joke. Maybe you know what direction I need to go in to get this matter resolved. I really would appreciate some help, thanks Steve
Wow so much info ,Thank you Ian.
O have a question about my DJI FPV goggle V2 with 03 system. Cuz I'm showing it's at 30 to 33 Mbps instead of 50.8 mbps, what can i do to get 50.8 mbps back?? My dual antenna is in very good condition, nothing wrong with antenna, i have checked the antennas 3 times, but nothing wrong with antennas, i don't get it why I'm showing the 30 to 33 Mbps instead of 50.8 Mbps. Can you help me, please, Ian?? Cuz i have tried asked other drone FPV pilots like Nick Burns and he have no clue why I'm showing 30 to 33 Mbps on DJI FPV goggle V2 with 03 HD system and it's driving me crazy to see 30 to 33 Mbps. But when i switched back to Vista and original Air Unit system, they are showing me perfectly at 50.8 mbps. I don't get it, can you please help, Ian?? This is driving me crazy 🤯.... Could it be from firmware bug???
Ok that is bloody odd. It should be 50Mbps. When you arm does it start recording ? Have you re flashed the O3 firmware ?
Please come onto my discord to help diagnose this. N
@@MadRC yes sir, it will recording immediately once armed. And I have tried downgraded or upgraded and even reflash firmware, but nothing seems work. That when other FPV pilots are saying same thing that's really strange, cuz they don't have that issue but only me, that's why it's driving me nuts, sighs....
@@MadRC plus I did try changed to 25 Mbps, then when I use the 25 Mbps, it went down to about 14 to 18 Mbps. Then I went back to 50.8, but it showing me 30 to 33 Mbps. Man I don't get it. Others are saying it might be firmware bug, could it be??
Thank you for clear information. I hope Goggles 2 will works dji FPV drone
Livesaver. Great video. Thank you
how do i get the old firmware
Work the goggles 2 with the potato?
Sadly no. Not enough starch.
@@MadRC Haha 🥔🚀
I just got my integra goggles. Tried to bind with my DJI FPV drone but no luck. Switched over to fpv air unit in setting but still not connecting.
The Integra does not work with the FPV drone. Only the V2 goggles.
@Mads Tech ohh okay thank you. I was a little confused. I thought fpv air unit meant it would work with the fpv drone. Will there be an update that will make it truly backward compatible ??
So you're saying that I must use the 03 air unit since I have the goggles v2 and controller 2. What a PITA.
Thanks for this Ian!
Thanks, your video solved my problem! 👌
Thanks for this clarification, Ian. This video should come from DJI, but that won't be a DJI thing.😂😂
Thank You! Great Work!
Thanks for this video. Just subscribed.
Any update on this?
Nope. It’s still a shitshow .
wtfos hack, it is now also usable with the new firmware on the v2 Google or am i not allowed to change it?
All firmware versions can be rooted now with Butter. No restrictions or limits.
tnx a lot ❤❤❤
Thank you
Thank You!
Thank you!!!!!
thank you very much
Why do you call it DYI mode, that's not a mode I see in the goggles?
DJI FPV has often been calluses DIY since the FPV drone as it’s easyer to separate.
👏👏👏 Loud and clear! Thank you Ian! ♥ ¶ : - )
They needa fix the bind loss issue for V2’s and switching between O3/Vista!
How can connect goggles v2 to mini pro 4 ? Is it possible guys ?
Sadly no. Only the Goggles 2 and Integra
Ok thank you. This is bad ... @@MadRC
Thanks bro!!
No OSD version firmware air unit v01 00 0608 wtfos
Simply put : just upgrade all your quads to O³ and Goggle 2 / Integra 😅
DJI should be paying this man...
I carry a paper clip with me to be able to bind the different transmitters.
“Why cant we all get along”
😅 👍
It seems like DJI is phasing out the dji fpv assistant.
now watch this video again and pretend that you don't know what any of this means... 😂 sounds like version & compatibility hell
Because DJI decided to NOT make their FPV gear compatible..... I ran away from DJI.
But it is.
This is terrible! why is the controller 2 compatible with the caddx.. but ONLY if you have the goggles 2 and not the goggles v2? My brain is not compatible to this logic!
So you are forced to buy the new product
@@chedil08 yeah, DJI doesn't love us.
@@SanneBerkhuizen there are some open source digital FPV systems on the go, obviously it is a self building affair, but I think that is the way
@@chedil08 yeah, but after the introduction of the DJI FPV drone. I wanted to try it for myself.
And now I have the goggles...
I'll probably get hdzero one day. But then again. The range isn't great.
@@SanneBerkhuizen I have an Avata bought used low price with goggles V2 in Europe you have to stay 150 meters far from houses as it is more than 250g
It is a mess intended to force you to buy the new one
What a mess
DJI hate us
If you ever wondered if DJI was for making a dollar, giving a damn or making a difference we have our answer. As they continue adding more incompatible crap, this stinks when you spend all day working on something you think you did wrong that was simply a result of piss poor planning by a corporation. They should have let the hobby develop organically with time developed support if they were not gonna at least add consistency along the way. Sell the branch off to the hobbyists!! I'm sure you have enough other stuff in development.
First one :D
I can't even downgrade firmware :( I got totally sucked into the dji avata system and now I can use the controller with older units! wtf
Please explain to what you mean. What remote are you using and what Goggle
jfc dji! wtf!...
wtf, DJI are you healthy in your head
Yes so people buy new product
4 minutes in and im lost as can be... I would need u to not throw so much shit at us all... if u do this then that. but if u don't then this will happen but only under the conditions of 000 being 0010 and 01010 to 001 and with the change to 000110 nothing will work and 000.1 now we are fractional and infinity and beyond!
F DJI I sell my stuff for cheap!
Screw dji