I just did this and I did not have to do the CLI command. DJI assistant upgraded just fine. WTFOS must have added the ADB removal to the automated removal process.
Haven't watched the full video yet. Guess new update has worthwhile features? I only have V1's and WTFOS installed on all vistas, colour OSD in goggles too. Still good enough for me. If I had money, I'd get V2 not goggles 2.
Please help me how can I update my air unit vista to the latest firmware? The update process freezes at 99% I deleted wtfos with the button, then I need to go to the cli but after deleting wtfos it is not active, it swears at ADB and asks to re-route
After removing WTFOS i get the following message when trying to reconnect "Could not connect to device, make sure that adb server is not running on your machine (adb kill-server) and that you are not connected in another tab/window." So i am unable to open CLI and run the code. Any ideas on how to get around this issue?
I have one question about audience mode on Goggles 2 and goggles V2 . And you might have both. I have 2 dji goggles V2 and audience mode works well. Did you teste audience mode with a dji goggle2 as master and goggles V2 as spectator?
No, I only have V2 goggles. On top of that, audience mode for G2 works in a different way than in V2. Goggles are rebroadcasting instead of V2 listening to Air Unit
I have this issue trying to bind a link to g2,I got the same error,so removed wtfos,and followed this video to remove the adb aswell,and the cannot load firmware error still comes up in dji assistant,please help us im stuck as to what to do now
@@aryabolang2021 what worked for me as I remember,is I removed wtfos and the adb,and it still didn’t work I tried a couple of times with no success,it was only on my 3rd and last attempt before I was going to throw it in the bin in a rage!,that it worked😵💫
@@serang Right, imo they are annoyed they got hacked and trying to close the door again with firmware updates and lock us out again. Just wait for it ;-) Sticking with WTF for now.
@@flyingdutchmanfpv IMO they're too stupid. People do like WTF-OS, the MSP DP is perfect for any firmware, and we can customize the font. But they don't copy the work of WTF-OS. What they did is making simpler OSD that was Betaflight centric. They forgot people with fixed wings existed. I believe they could make more money if they cared more about the community. Up until today I'm holding off to buy O3 because I don't want to see question marks on my INAV OSD.
@@philthayer4087 what I ended having to do was root it again reinstall wtfos install a couple of the programs or what ever they are call then while it’s still connected uninstall Everything again and it finally worked.
Right in time, I was literally about to give up with the "cannot load firmware error". Then I discovered this video
Glad I could help
Hi ..unfortunately, despite the deletion attempts, I can't see the firmware in Assistant 2...how can I do it? Sorry for my English as a translator
wtfos-remove-adb, thanks for sharing this helpful command
Thanks for the tutorial, Pawel! 😊
Stay safe there with your family! 🖖😊
It's your own fault, you could have kept the V2. 😅😝
tried removing wtfos but it takes so long. tried how many times (almost 15mins eveytime) but still no good result. is there any fix on this?
Thank you for this Pawel!! Looking good bud, keep them coming!
More to come!
Great information
Glad you liked it. Happy flying!
I’m doing it according to your video, after deleting wtfos I can’t go into the cli to register wtfos-remove-adb, it’s not active
I just did this and I did not have to do the CLI command. DJI assistant upgraded just fine. WTFOS must have added the ADB removal to the automated removal process.
Thank you for this video, I very much appreciate it 🙂
Haven't watched the full video yet. Guess new update has worthwhile features?
I only have V1's and WTFOS installed on all vistas, colour OSD in goggles too.
Still good enough for me. If I had money, I'd get V2 not goggles 2.
Please help me how can I update my air unit vista to the latest firmware? The update process freezes at 99% I deleted wtfos with the button, then I need to go to the cli but after deleting wtfos it is not active, it swears at ADB and asks to re-route
THANK YOU!!!!
You are welcome. Happy flying!
My concern is the online installer/uninstaller. Can we go back to default DJI firmware if the wtfos website goes down?
after unninstalling it doesn t want to connect anymore so i can t go through the cli command
I tried this and still doesn’t allow me to downgrade my vista.
Do you have good range when combined goggles 2 and vista? I get very poor range.
After removing WTFOS i get the following message when trying to reconnect "Could not connect to device, make sure that adb server is not running on your machine (adb kill-server) and that you are not connected in another tab/window." So i am unable to open CLI and run the code. Any ideas on how to get around this issue?
Ciao, a me non si binda con G2😢 Soluzioni?
How is it a one way trip if you can downgrade?
I have few planes and drones and all of them are analog for now, if I want to upgrade to digital what googles you recommend v2 or 2?
Get DJI V2, before they disappear "new". Not goggles2. IMO, from reviews.
is this new ? does it also work with the v2 googles ?
Still flying analog and want to switch over to digital soon. Will this new DJI stuff allow us to have full INAV and Betaflight OSD?
Yes
I have one question about audience mode on Goggles 2 and goggles V2 . And you might have both.
I have 2 dji goggles V2 and audience mode works well.
Did you teste audience mode with a dji goggle2 as master and goggles V2 as spectator?
No, I only have V2 goggles. On top of that, audience mode for G2 works in a different way than in V2. Goggles are rebroadcasting instead of V2 listening to Air Unit
@@FPVUniversity So the goggle you are holding in your hands in this video is just a 3D printed moke-up of G2??
:D
Do we have full HD OSD now ????
I have this issue trying to bind a link to g2,I got the same error,so removed wtfos,and followed this video to remove the adb aswell,and the cannot load firmware error still comes up in dji assistant,please help us im stuck as to what to do now
me to
@@aryabolang2021 what worked for me as I remember,is I removed wtfos and the adb,and it still didn’t work I tried a couple of times with no success,it was only on my 3rd and last attempt before I was going to throw it in the bin in a rage!,that it worked😵💫
So does the original air unit now work with msp displayport and Goggles V2? Or only with Goggles 2?
Also can't you use fpv-wtf/butter to force flash original firmware which would wipe wtfos?
Official MSP Displayport will work only with Goggles 2, not FPV Goggles V2
Falled detecting ADB, please (re-)root your device! This is the error that appears
Did you find a fix? How? :)
So qq: if I have the goggles 1 v2 can I update the dji firmware and get the msp osd stuff or do I need the goggles 2?
Only Goggles 2
Like what he said "WTF OSD is much better"
@@serang Right, imo they are annoyed they got hacked and trying to close the door again with firmware updates and lock us out again. Just wait for it ;-) Sticking with WTF for now.
@@flyingdutchmanfpv IMO they're too stupid. People do like WTF-OS, the MSP DP is perfect for any firmware, and we can customize the font. But they don't copy the work of WTF-OS. What they did is making simpler OSD that was Betaflight centric. They forgot people with fixed wings existed. I believe they could make more money if they cared more about the community. Up until today I'm holding off to buy O3 because I don't want to see question marks on my INAV OSD.
I cannot get wtfos to uninstall. It’s says it did but never does.
😡
yeah out of my 3 units 1 was easy the rest I can uninstall and remove wtfos-remove-adb. However I can't load latest dji
@@philthayer4087 what I ended having to do was root it again reinstall wtfos install a couple of the programs or what ever they are call then while it’s still connected uninstall Everything again and it finally worked.
@@EliteFpv Same for me, I had to root again reinstall, then uninstall and it worked second time.
Mozna po Polsku lub chociaż napisy dodać polskie. Było by miło
wtfos-remove-adb