FS2020 - How to Toggle Reverse Thrust on Logitech Throttle Quadrant
HTML-код
- Опубликовано: 27 июл 2024
- #FS2020 #flightsim #microsoftfligthsimulator
A few people have been asking for a solution for this - here's the best solution I've found so far! 
Игры
What's really annoying is that the throttle quadrant itself does 100% support reverse thrust below the detent on the axis but Saitek broke this and implemented a soft switch instead. Because I have an investment in Saitek stuff and had built a panel around it, i've recently changed to a Honeycomb yoke while keeping the rest. This raised an issue that one of my throttle quadrants is the one with the PS2 connector that goes into the Saitek yoke. Rather than discard this, I opted to rewire it to work via a Leo Bodnar joystick board and I completely forgot about the 3 switches below the detent but in calibration noticed that the "zero" position at the detent is part way into the potentiometer axis already. I pushed the lever down and lo and behold, a complete axis!
Saitek/Logitech implemented the "switch" entirely in the control board and it's far better without it now and I have a variable reverse thrust axis. My axes are now implemented in Spad.next as "Throttle WITH reverse thrust". Very happy with my modification and the "reverse" switch if desired can be implemented in Spad.next as a conditional event.
Wonderful David & a useful guide for others.
Hi ya everyone. This is all aircraft capable of reverse thrust and applies to Saitek throttle quad. There is a way to get the engines to go full reverse without having to toggle reverse and then pushing the throttle forward again. This is a method that is all done in the sim control options. Set the switch at the very bottom of throttle travel on the Saitek throttle quad throttle lever to hold reverse thrust. This will keep reverse engaged as long as the lever is all the way down on the switch. Next assign decrease throttle to the same switch at the bottom of throttle lever travel (yes you can assign two actions to one switch). When the switch is engaged by the throttle lever reverse activates and stays activated and at the same time the decrease throttle will spool up the engines which are in reverse. Push the throttle lever forward and the reverse disengages. Ole school reverse, pull the throttle down and leave it there until you have slowed to taxi speed. Hope this helps someone.
IT WORKED! Thank you so much, you are a genius!
Oh man you're awesome ahah
keep this comment as a future note
Hi there...can you please be more specific to exactly how that set up is done,to me this narrative is somewhat vague...You say..."next assign"..but what about the first step? is this on the Z axis? unfortunatly I did not understand what was said!
This helped everyone lol
Thank you so much, I was spending a bit of time trying different settings to make it work. I gave up and searched for a video, bingo this is the one. Much appreciated!
Just now seeing this video a year later, I recently bought a T. Flight Stick X from Thrustmaster! Well, it has the throttle built into the flight stick, and as an avid a320 and 737 flyer, I needed to figure out how to get reverse thrust for those awesome landings!! thanks again, dude!
Time flies! Glad it's been useful to you ;)
Thank you so much. I just got Fs2020 a few weeks ago and I didn’t know how to get reverse thrust. If it wasn’t for you I would still be landing without reverse thrust. Thanks 👍
You're most welcome 👍
Hello! I just got my yoke a couple days ago, and I have been watching your vids. Thankss!!
More to come! ;)
Better way:
POWER MANAGEMENT/ THROTTLE/
THROTTLE 1 AXIS - JOYSTICK BUTTON 7
THROTTLE 2 AXIS - JOYSTICK BUTTON 7
THROTTLE 3 AXIS - JOYSTICK BUTTON 7
THROTTLE 4 AXIS - JOYSTICK BUTTON 7
HOLD THROTTLE REVERSE THRUST - JOYSTICK BUTTON 7
Acts funny in setup but works perfectly in sim.
Great tip!
Dude, you're a genius. But unfortunately when switching from Reverse to 0 it is often set to A/THR in the A320. I don't know if it is my Logitec Quadrant (I also have another quality problem on the buttons already), or if it is the Flight Simulator or maybe the setting here... But for the landing only this works fine.
@@DinoDarinoMischtdentorf sometimes going to the zero detent is not perfect. I have found when ending reverse it is better to advance slightly ahead of 0 detent, then quickly back to the 0 detent. Do not know if this could help you.
The function "decrease throttle" works fine to reverse too. Try it
@@claissonferreira I tried Option/Controls/Saitek Pro Flight Throttle Quadrant.
Deleted:
THROTTLE 1 AXIS - JOYSTICK BUTTON 7
THROTTLE 2 AXIS - JOYSTICK BUTTON 7
THROTTLE 3 AXIS - JOYSTICK BUTTON 7
THROTTLE 4 AXIS - JOYSTICK BUTTON 7
HOLD THROTTLE REVERSE THRUST - JOYSTICK BUTTON 7
Then added:
DECREASE THROTTLE
Did not reverse props
Then added:
THROTTLE 1 AXIS - JOYSTICK BUTTON 7
THROTTLE 2 AXIS - JOYSTICK BUTTON 7
THROTTLE 3 AXIS - JOYSTICK BUTTON 7
THROTTLE 4 AXIS - JOYSTICK BUTTON 7
DECREASE THROTTLE
Did not reverse props
Could you be more specific?
Exactly, and I mean exactly, what I was looking for! Thank you. I had a button set up for reverse thrust on my x52 throttle but during a landing sometimes the button would not take and I would end up in major forward thrust perfectly ruining an otherwise good landing. So I bought the quadrant an was trying to figure out how to use revers thrust on the black lever. I intuitively put it all the way down expecting it to work, but no. So the secret is to put it all the way down momentarily as a toggle then go forward. Again, thank you very much.
Great to hear this is still helping people.
thanks! works on Caravan too -very helpful, thanks again!
Most welcome!
Thanks for the support! I really appreciate it, have a good day!!
Most welcome and you too!
Very thanks buddy!! you resolv my problem on quadrants!!!
Great to hear!👍
Thank you, the best solution ever seen.
You're welcome.
Just assign z to decrease thrust command. Not toggle. The problem with toggle is that you need to hit the key but if you don't pay attention reverse wont apply. After that you just push all the way down to z and reverse will apply to the 25%. Remember Decrease Throttle with the letter z.
omg cant believe i am only figuring this out now, didnt think it was possible
Glad to be of help!
Thx I was having difficulty doing this so this vid is approximated by me
Hi! Late to the party...typical. The old reverse on FSX is F2. Still is in MSFS. Assign throttle quadrant detent to "Decrease throttle" and it works a charm:-)
Excellent suggestion!
Yet another great Vid you are the best
You Honour me
It's counter intuitive to push the throttle forward while trying to stop. I like the old flight sim where toggling it meant reverse thrust + full power. FS2020 never quite got it together.
Cracking, this solved the problem (albeit my problem!) In minutes. Thanks.
That's great to hear.
Très bien expliqué. Merci!
très bienvenu!
Thanks ! Would you recommend to have your version (toggle and throttle up to activate) or the "old school" version by SilkyPJ (hold the lever full down, then push it up again to deactivate the reverse) ?
I find it much easier to just assign a button on the throttle to hold rev thrust until you let it go myself, that way you are not left wondering what mode you are in. My throttle does not have a detent, sadly, so have to do it this way, but it works, LoL
Yes I now use 'hold' reverse thrust myself; much better👍
@@Huddison when searching for a way to set reverse thrust with this quadrant, your video comes up. Since you've found "hold" reverse thrust to be better, you might want to just remove this video and make an updated on. If I hadn't gone to the comments, I wouldn't know the better way.
Thank you this vid is very helpful!
No problem!
In this latest GOTY edition & update, these settings no longer appear to work with the new addition of 'on push' & 'on release' settings added - can you please help/advise as to reassign the original settings as per this old video tutorial for my Logitech Throttle Quadrant? Thanks in advance 👍
I'll have to look into it.
@@Huddison thanks, it'll be much appreciated 🙏
I’m also having the same problem, haven’t found anything to fix yet.
I've not seen any other RUclips vidz that have announced/discovered this change. Any joy yet anyone??
@@christomlinson5139 I have the same issue, I can set it to reverse and it does work the problem I have is that when I spawn into the plane at the start it seems to be in reverse as default
Congratulations on 300 Likes!
Thanks ;)
Please help... I have the same yoke and throttle quadrant. They worked perfectly in FSX. Now in fs 2020 my throttle won’t work although the yoke does. There is power to the quadrant as there is the green light on. Strangely the speed brake engages and disengages constantly whilst the throttle unit is connected to the yoke housing and unplugging it from the yoke housing stops it !! At my wits end with this now....any ideas or suggestions would be greatly appreciated
I've heard of this issue before, but unfortunately, I don't know what is causing it - I'll pin this post, with the hopes that others who have had similar issues, may be able to help.
@@Huddison thanks for responding so quickly...hopefully someone can identify the issue..thanks for the helpful videos btw 👍
@@lenwilliams2333 most welcome 😊
I buy my fsx 2020 two days ago and have same problem with my throttle won’t work although the yoke does. I try to look over internet and cant find the answer so I delete fsx 2020 from my computer reset my windows 10 to factory and than connect my saitek pro first with all sticks down on idle position than reinstall the mfs 2020 . After install fsx the quadrant start working normally with no problems. After that I go to my fsx- PROFILE - than to CONTENT MANADGER and download all files UP TO DATE.
@@openmind9314 thanks for this information it’s greatly appreciated 👍
Dude, u da man!!! Thanks.
My pleasure👍
Hi Huddison, thanks for your time to develop those helpful videos for us. I have two logitech quadrants and I want to use it in the Cessna 337 Skymaster or any other aircraft that have two props. I set the others (throttles, propellers and mixture) and works perfect, but the Feather switch for props don't works. I have set toggle feather switch 1 for prop 1 at RX; (that's the click sound when you move the lever of prop below zero mark) and nothing do. Any ideas or fix to do this in the video but for propellers? Thanks a lot and keep going!!! Take care!
Please ask this question in our Discord: discord.gg/3kra6JfHZT - I remember a similar conversation on this there, in the recent(ish) past.
very useful knowledge
Thanks
Thank you for this.
You're most welcome.
Hi Huddison, after a few hiccups I managed to install the PMDG-737. Of course I had some of your tutorials on my second screen but there' s one function that behaves strange. I want to use the Left lever of the Throttle quadrant to toggle the Speedbrake, that worked. I like the middle one to act as thrust (both engines). But as soon as I push this lever beyond 80% my right lever kicks in the reverse thrust (full). I checked if I had assigned a key to this (reverse) function but there doesn't seem to be any assignment connected to the right lever. Do you have any idea' s or suggestions? Thanks in advance ;-)
Did you assign your throttles as 'Throttle Axis'; not throttle 1,2 etc?
@@Huddison Solved (thanks). I had chosen "Throttle AXIS 1 (0 TO 100%)" in stead of "Throttle 1 AXIS". I also assigned the Third lever (Down) to toggle / activate "Reverse thrust" using my middle thrust lever. Anyway, we're getting there ;-)
Great to hear Ed ;)
Hi I have this set up and for some reason the rudder C1& C2 buttons dont work on the Cessnas. Do you know why or how I can fix that? I have them set to my 10keyless keyboard and would love to have them work on the yolk?
Thank you in advance!
Hi, Have you checked my other video first, about setting up the Yoke in FS2020?:
ruclips.net/video/HFw40R6IEIY/видео.html
There's a part in that showing you how to set-up your buttons. Out of interest, what are you trying to set C1 & C2 to?
Cheers, I was thinking about ordering a set of these, there are like rocking horse poop right now though. Did you review them?
Yes check through my 'Flight Sim' playlist, you should find a review in there😉
Hi Huddison, I have a problem with my Saitek Pro Quadrant. I can't get full travel on the throttle lever(the middle one of the three I use) After I set the axis it only moves from idle to reverse. Can't move up to increase Autothrottle, CL/Flx/ and Toga. Sorry if its a stupid question but its driving me crazy! I'm using this on the Flybywire A320neo. Everything else seems to be fine. Any help gratefully appreciated. Thanks
Hi, come and ask this in the Discord: discord.gg/3kra6JfHZT
We can talk you through troubleshooting better there.
I have the same problem
Perfect, thanks
Hello I use the DHC-4 Caribou. I followed your approach and it worked very well. Recently I installed the ornithopter (Dune) and for some reason, when I put the Caribou back on, the reverse command no longer works. I've tried everything to get it back to how it was before and I can't. Do you have a solution for me?
Not certain why installing the Omithopter ruins controls for some; will aim to look into it.
you always save my life
Good to know 😉
Is it possible to toggle full reverse just by hiting the soft switch without putting the lever full forward after?
It was possible before on FSX and Prepar3d
I do believe that there are one or two combinations one can use - I should revisit this subject.
Come & ask this question in our discord: discord.gg/3kra6JfHZT - lot's of inventive chaps in there!
I can activate this with the big airliners and the Cessna 208B and TBM 930. But i can not go backwards on the taxi way with the King Air 350 and with the Cessna Longitude. Or is it generally not possible in real life? Thanks!
Good question & I'm not sure from the top of my head. Hopefully others will chip in on this one.
@jrd210 The airliners go backwards with toggle thrust, but the Longitude have also turbines and do not go backwards. The TBM 930 and C208 have props and go backwards, but the King Air 350 with props do not go backwards. I dont understand it!?!
hey man i have the same controllers as you. how do i set flaps on the throttle controller? is there a video i tried in game and set joystick r axis x + and joystick r axis - to increase and decrease flaps, but it was only doing either full flaps or no flaps and i want it realistic where i can adjust the amount of flaps with the middle throttle with blue cover lever. if that makes sense
Hi check this other video of mine - it should help:
ruclips.net/video/N18KdQct9n4/видео.html
@@Huddison wow that was a huge help now my flaps are set to 0,10,20,30.... now it seems my Rutter pedals are messing up. Whenever I hold them to turn left they move left then move back the straight and you can’t properly steer and taxi it goes out of control
@@speezy1414 I still haven't managed to get a hold of rudder pedals, so won't be much help to you there currently.
I have been flying propeller aircraft and have had a miserable time trying to get the saitek throttle to work. I only have 100% and 0. I have tried doing the 90, 88, etc, what am I doing wrong? I have been featuring with F2 and F3.
Best joining the discord (we can better help you in there): discord.gg/3kra6JfHZT
Hi Huddison, thanks for the great video . I have applied the toggle setting exactly as per your explanation, I am also using the same Quadrant that you have but when I toggle it for reverse thrust the aircraft still doesnt go into reverse. Is this setting limited to certain air craft or what i am doing wrong
See a video I released a few weeks ago for a work-around. Can't link it as I'm at work, but reverse thrust is in its title.
same did you ever find a fix?
Thanks a lot man
Happy to help
thanks for the video.
is it possible to set it normaly as it has to be like fsx? i mean, only with pulling the throttle lever down below the idle position
I don't believe so yet, but give it time - it's bound to be an option soon.
Reverse works better if you put your input in “Decrease throttle”.
If there's an in-game settings option to turn toggle off, then it should just engage full reverse thrust when you click it down, then back to neutral when you click it back up. If reverse only has toggle option, then set the Z to decrease thrust control, and it should drop thrust to neutral and continue into reverse.
Thx!
Most welcome!
Is there a way to make it to where when i bring it to the reverse position the engines go to reverse and then max reverse automatically like real life?
Let's call that a work in progress - remind me to come back to you.
thank you
do you have a video of how to set up all the buttons on the logitech yoke or does it do it by it self ?
FS2020 as default, sets some of the buttons for various functions - you're best going through the controls options yourself and set the buttons up, as you would like them.
Check my other videos for setting up the flight System in FS2020😉
umm NO defaults for my Saitek Cessna Yoke help
@@g4kfjve7kfj34 planning on making a video on this
@@Huddison oh grand many thanks
Hey o tried it and it doesn’t work like it’s on the menu but when I try to use it it doesn’t work
Hey! thanks for your video ! I need help for calibrating a double quadrant (2 throttle quadrant Saitek). Thank you !
Thanks. I haven't yet done a double quadrant setup myself yet, but I'm sure there's plenty of helpful videos out there!
Do you have Star Wars squadrons, If so will the throttle work with that game?
I do but on PSVR - may buy it for PCVR one day
Can I ask ... Was thinking of buying a logitech throttle quad... Can you tell me, can I just power it from the PC USB or do you need a yoke as well? Thank you
Hi, you can apparently buy _separate_ throttle quadrants that have USB connectivity - so these should work independently.
I haven't got one myself, nor tried it, so I cannot confirm how/if it works.
@@Huddison Thank you so much and thank you for doing the videos.. I am a bit reluctant to buy Logitech as have an excellent Nav control panel bought directly from them in October.. The silver knob, from day one started to work loose.. I was happy under their instructions to fix the pot but was told not to.as its under guarantee .. Had to send them email after email and a video only to have radio silence now from them ....Not impressed at all with LOGITECH SUPPORT on a new product...Left with a faulty £70 unit
@@alwatt9367 Your experience with them, doesn't sound too good at all.
I did send them an email a while ago & know that they are struggling (as with many companies), because of the current pandemic, so that might be an equation - keep on trying to contact them.
By the way, keep an eye out for a video from me later on today - I think it'll be right up your street ;)
@@Huddison Thank you for the reply... This has been going on for nearly 8 weeks and I keep being asked for additional info and who I bought it from...As requested sent the invoice from them etc and they still keep asking for more info... This is a new unit and covered under a warranty which they admit is correct...Sad since I could buy more of the logitech flight gear, but not sure of back up service now.
THANK YOU!!!!!!!!!!!!!!!!!!!!!
You saved me Bro
Great to hear 👍
SU5 just killed my throttle axis I now have forward and reverse throttle on the same axis split in half.... if I put my axis down it immediately controls the reverse thrust and if I push it forward it controls the normal thrust..... Is there any way to set this back? It just happened after sim update 5... and I really want the old controls back where I could switch between the thrust modes with a button and have my axis control only one thrust at the time....
I'm not quite sure off the top of my head, what's causing that. Ask in the Discord discord.gg/3kra6JfHZT
I remember somebody there who had similar issues.
I was having similar problem setting mine up…I noticed that if you are using the FlyByWire A320 you need to open the FlyPad to right of pilot then go to Settings and Calibrate the Detents…by default, reverse full is calibrated into the range of the throttle (comes on at about 25%)…I had to put the lever at 0% and select that I want it to be idle when there (no reverse thrust)…you then need to Save & Apply…then you can set the lever down (button 7) on the Throttle Quadrant as Decrease Throttle…works for me now 😉
Ah thanks for this, I thought it was put it in the down position to toggle 100% reverse thrust, not toggle the operation of the lever :) is there a way so when you press it down and hold it there it just gives 100% reverse thrust?
I don't believe you can have 100% reverse thrust by putting the lever in it's down most position.
You can set a button as 'Hold Reverse Thrust', which is more definite, so to speak.
@@Huddison is so easy to fix with the z. Just assign z to decrease thrust command. Not toggle. The problem with toggle is that you need to hit the key but if you don't pay attention reverse wont apply.
@@samuelaponte7746 Yes that's certainly another option if you prefer.
@@samuelaponte7746 I like that idea, make it the same as pressing and holding F2 so it goes to 100% reverse thrust.
@@teenflon 😃
When I do that it constantly switches between regular thrust and reverse thrust on its own. I can't control it.
Toggle it once for reverse and the throttle acts as a reverse thrust when you increase it; toggle it again for ordinary thrust.
can I set the blue throttle separate as reverse thrust ??
You can certainly set the detent on it for toggle reverse thrust or similar.
I'm 2 years late to this but I'm having a problem I've set it to the Z axis but when i pull the thrust back it goes full throttle and vice versa
Tick the reverse Axis box in controls Options.
How do you find or know what "z", etc refer to on the hardware?
I'm not fully clear on your question: but you can see what buttons are assigned to which function, via control settings.
@@Huddison I found it in the manual for the throttle and yoke.
hello, I have multiple throttles so am using the Throttle 1, 2 etc. separate axis but part of the axis is reverse thrust any ideas?
If you check the reverse thrust binding and clear it, that may help. Can you provide me more information, as it's difficult to picture what you mean?
@@Huddison I have removed all reverse thrust bindings, what I mean is for my throttles' axis at 50% down the axis it engages reverse thrust
@@Huddison I believe I have fixed it, thanks anyway
@@AviationAlex Great! I was just about to reply and say ensure you have throttles set to correct axis bindings - but it looks like you figured it out for yourself ;)
@@Huddison :D
I click throttle and that it i don't see any throttle options. I got my flight sim this year has the options changed
You should be seeing options John, but the latest Sim Update might've reset some settings.
I'll aim to look into this at some point in the near future.
Is there a way I could put two throttle quadrants together
Yes, you can buy an extra throttle that has a usb connection and use dual throttles.
someone knows how to do the feather on the prop lever?
Thank you very much, I don't understand how msfs2020 is not prepared for the flight yoke system.
It is, but there are so many Flight controller systems out there!
I have the same throttle quadrant and no matter how many times I try reversing the axis the action remains backwards in the game. For example when I push my lever forward with my hand, the plane loses power. So I invert the axis in settings and it doesn’t save that no matter how many times I tell it to.
When you thought that you've heard everything..😗.
Do you have your quadrant configured in a separate program/software?
Huddison no
@@colbyjamesreynolds1516 Did you find a solution? I have the same problem
greetoz I actually ended up turning the actual quadrant itself upside down. I took the clamp off the back and inverted the clamp so it’s upside down from how I had it before, but now the simulator recognizes my hand going forward as adding power.
@@colbyjamesreynolds1516 I found out the indication in FS2020 is not correct under the settings. But the actual throttle does work. I just have it set WITHOUT the reverse axis checkbox and the throttle acts normally. The indication under settings is just wrong.
All microsoft had to do was add a axis to thrust reversers. Breaks immersion for me.
Yes that would've been ideal.
thanks
You're welcome
when i push the throttle forward it increases. But when I pull the throttle back, it stays at full power. what's wrong? for example at a Cessna.
Info: I have the Saitek pro flight yoke system with throttle quadrant
Is this in normal flight? Watch through this video, to see if it helps:
ruclips.net/video/N18KdQct9n4/видео.html
I did exactly what you do in the film, but still the accelrate stays the same
@@ster100 I'll investigate further for you.
Can no one tell us how to configure the Saitek throttle quad for a 737 or a 2 eng jet? The Saitek is recognized but they are configured throttle/prop/mixture not throttle/throttle/speedbrake. That's what I need. Plus, all I see is button pushes, and the game keeps displaying a X-Box game pad when I'm on a PC. All this is TOTALLY unintuitive compared to XPlane, which I needed no tutorial for. I cannot begin to figure it out.
You might have some luck with this on our Discord: discord.gg/xDKwFYDsZk
which button do you use for the brakes ?
The wheel brakes? I typically use the toe brakes on my rudder pedals.
@@Huddison no have pedals .which button do you this for brakes?
@@itohulkgameplay Set one up that suits yourself.
@@Huddison thanks
A video on how to set the throttle and mixture?
So without reverse.
I can't even get the trhottle quadrant to work at all. It won't let me even set any controls to the throttle quadrant. THe only thing that shows up is the yoke.
Is the green light on, on the throttle quadrant?
i still dont know how that works ..what has the keyboard key "Z" to do with the throttle lever ?
Not quite with you there.
Can I add a second throttle and use with msfs2020?
Yes, you can buy the Logitech throttle quadrants separately and they connect via usb (to your PC or Yoke hub).
@@Huddison how do I get them both to show up in my hardware settings? It seems to show just one?
@@kenfriess3108 hmm, I don't have 2, but the added one should surely show in Options/controls?
Will keep at it. I confess my competence with control mapping is limit...thanks very much.
All good worked it out...lol
How can you turn to right and left on the ground ( not in the air) with that flight yoke system?
If you don't have rudder connected, the yoke will steer your plane on the ground.
When i try flying the captain sim 777 the throttle either starts going back and forth and if i bind it using Z it doesn’t activate at all. anyone know a fix?
Re the Z assignment - see the appropriate part of this video: ruclips.net/video/GbfpGGQaAsk/видео.html
👍👍👍
👍🤩
My screen always freeze when I try to validate, do you know why and how to prevent it?
Nevermind it works now
Giggity
Can you also set idle reverse?
Possibly, not really looked into that one.
So couldt you use the red lever as flaps lever?
Yes it's how I have it set up.
@@Huddison Amazing👍🏼 and thanks for the help btw!!
@@Huddison what do you use the blue one for?
@@biopower5160 This will better explain my setup: ruclips.net/video/38T03hm48es/видео.html
@@Huddison ohh! Ive seen that vid but I didnt realize it was you😂 thanks buddy! Keep doing the amazing work!
Is that possible in X flight 11 as well?
Do you mean X-Plane 11? I've not messed around in that sim for a good while.
@@Huddison Sorry, X-Plane 11 of course, yes 😂 Boeing 737 800. The idea would be 2x Saitek throttle with (from l. t.r.) speed brake, throttle, flaps, 2x fuel and gear up-down. 3+3 so to say. What do you think about? 🤭
@@nobudgetkalle That sounds like a good use of them.
It toggles rvereser then when i move it forward to reverese it disengages?!!!
Hold reverse it a better way - I'll aim to revisit/update this video.
Thank you, most useful!
Most welcome 👍
the geakery is strong in this one
I don’t like the toggle option for reverse thrust. You’re only asking for problems.
If it doesn’t toggle correctly the first time or for some reason it toggles twice, you could be full at thrust with breaks on and not much runway left. Not good.
That's a good point. I been experimenting with 'Hold' reverse thrust and it's a little more definitive.
@@Huddison That’s a good idea. Might try that!
Just assign z to decrease thrust command. Not toggle. The problem with toggle is that you need to hit the key but if you don't pay attention reverse wont apply. After that you just push all the way down to z and reverse will apply to the 25%. Remember Decrease Throttle with the letter z.
Yes, I set my toggle reverse thrust option to one of the rocker switches beneath the throttle. If you hit the wrong one by mistake and thus do not toggle reverse thrust, and then go to full forward power instead, it goes very poorly, I assure you.
@@airborneyyc Same here. But can’t find a better way.
I followed your tutorial, but whenever I try the reverse thrust, it simply won't activate. Could you please help me?
Reverse thrust isn't working as it once was, after the last update - see this video for a work-around: ruclips.net/video/GbfpGGQaAsk/видео.html
@@Huddison Thanks a lot!
@@Huddison Does this work around work with the logitech throttle quadrant as well? That's the one I have.
Sorry but shouldn’t it be that when you pull it down you should leave it down and it should go max thrust reverse and when you pull it back up should go forward with the engines?
No in this case, it 'toggles' reverse thrust mode; so the engine power will effect that level of reverse thrust.
'Hold reverse thrust ' is actually the best (& safest) way to deploy it.
@@Huddison o ok thanks very much!
you was setting z on the yoke ;)
The quadrant is plugged into the yoke and is treated as the same controller.
Why does it have 3 thr thingys
smart
Ok so Julian talked me into it. Here is a video on how to get full reverse thrust with Saitek while remaining in detent. ruclips.net/video/mfH3n4H_LYA/видео.html
It just didn’t work for me ;(
Try setting a button for toggle reverse thrust - watch this:ruclips.net/video/qTmt5i5gjiM/видео.html
When i assigned Z, not working😖
Don’t work for me
Not working
So Realistic, push a button to activate Reverse, I dont know who was the smart pants who advisored Microsoft to do that, they said they were advisored by real pilots, Yeah Sure!!! hahahahahaha
Hi Huddison, when I put the reverse thrusters down it flickers between idle and reverse thrusters any thing you know about it?
You may be best setting a button for hold reverse thrust.
@@Huddison thanks i fixed it it works now
Schon wieder english pohhh
Well, I would speak Japanese if I knew how..
Worst flight sim I have ever used. Best looking, worst performing. Not ANYTHING even CLOSE to realistic. FUlly configured, full right rudder and right brake and a kingair 350 can't stay on the runway. As a king air pilot myself, this is the farthest from reality of any simulator I have ever flown (been simming since '94) GARBAGE!!!