UNBOXING & BUILD Sonicmodell AR Wing Pro 1000mm Wingspan FPV Flying Wing
HTML-код
- Опубликовано: 12 сен 2024
- Get one here: bit.ly/3oF8bC0
Radio I use: amzn.to/2ykFXUF
Receiver used: bit.ly/39svbhb
FPV Camera: bit.ly/38FJUGj
Similar battery: alnk.to/aAGsBQJ
ISDT Battery Checker : bit.ly/3ow5ZgD or on Amazon amzn.to/34uRzFq
Receiver I use: amzn.to/3osePfa
Camera used: amzn.to/3hmHXS3
My Amazon store: www.amazon.com...
Amazon links are affiliate links, free for you to use, but give me a tiny commission off the sale, to help fund my channel! Thank you!
I came up with a finished weight of 1lb8oz RTF minus battery. Assembly/Build was pretty easy, manual is very vague and doesn't show much, so I hope this video fills in any gaps!
It flies amazing, be sure to watch the flight videos!!
Description:
Brand Name: Sonicmodell
Item Name: AR Wing Pro
Material: High Quality EPP
Wingspan: 1000mm (39.37'')
Length: 450mm (17.71'')
Wing Area: 18dm²
Version: KIT, PNP (optional)
KIT Empty Weight: 340g
PNP Empty Weight: 500g
Recommended Sonicmodell Power Combo Configuration:
Motor: 2216-1400KV
ESC: 40A w/5V 3A BEC
Servos: 2pcs 9g metal gear servo
Propeller: 2 blades 8x5
Recommended Battery: 4S 3200-3500mAh Lipo, ZOHD Lionpack 18650 4S2P 7000mAh, Click Here
Recommended Flying Capability:
Max. Speed Tested Without Structural Failure: 220km/h with no structural damage or twist on elevons
Max. Recommended Takeoff Weight (with SONICMODELL power combo): 1425 grams
Reflex On Elevons: 1.5-2mm at level
Recommended Max. Throws: 12mm
Features:
- The World 1st FPV Wing with dedicated nose camera bay and main hatch bay for DJI HD Air Unit System, no need any cut or DIY to fit the DJI System.
- Aerodynamic designed FPV pocket in both sides of fuselage, with high efficient NACA air cooling system to ensure the FPV gear work in perfect condition.
- Molded by tough EPP material, built-in CF spar for enhancement, super stable flying capability and crash resistance.
- Extra nose and side camera bay and main hatch that compatible with all FPV and AIO cameras in the market.
- Nose camera slot compatible with all HD Auction cameras (for Gopro, DJI, Runcam etc) in the market.
- Multiple tunnels inside all quipment bays, easy to layout wire between each bay.
- Detachable main wing and wing tip, glue-free assembly, portable for outdoor flying.
- Built-in CF rod in the ailerons will give precision and sharp action to your inputs.
- High accurate ball link control system brings agile and quick response in control.
- Special-designed “servo arm built-in” structure will protect your servo arm from impact.
- Large battery bay for extended flight time and more rooms for various Flight Controller.
- Decent rear bay for ESC, isolate interference from other FPV equipment.
- Built-in plate inside fuselage for extra enhancement.
- Extra CA Hinges for DIY will bring you more stiff and agile control.
- Optimized air-cooling design will keep your gear safe from overheating.
PNP Includes:
SONICMODELL AR Wing Pro KIT with power combo (uninstalled motor, esc, servos, propeller, and hardware.)
PNP Package Size: 42*31*15.5cm
PNP Package Weight: 1500g
Note: Battery, charger, transmitter and receiver are not included.
#sonicmodel
#fpvwing
#rcairplane
Get one here: bit.ly/3oF8bC0
Radio I use: amzn.to/2ykFXUF
Receiver used: bit.ly/39svbhb
FPV Camera: bit.ly/38FJUGj
Similar battery: alnk.to/aAGsBQJ
ISDT Battery Checker : bit.ly/3ow5ZgD or on Amazon amzn.to/34uRzFq
Receiver I use: amzn.to/3osePfa
Camera used: amzn.to/3hmHXS3
My Amazon store: www.amazon.com/shop/johnvhrc
Amazon links are affiliate links, free for you to use, but give me a tiny commission off the sale, to help fund my channel! Thank you!
Nice video , I buy my rc but y don’t know about all this extras I need 😂😂
Those wood pieces are for different types of GoPros in the front Bay and the other wood piece is to line the DJI fpv mount in the hatch.
I just got this in the mail today this video helped me a lot great video
Great! Enjoy!
Great video John, thanks for sharing 👊🏼👊🏼
Thanks man!
Nice build vid, dose look nice and strong.
Yessir, it feels solid!
extra wood pieces are for different cameras
2 of the wood pieces are for front nose straps. each one allows the strap to go in a different direction.
the other wood piece is for the DJI hatch
Great video i will start my built tomorrow thanks
You have to add an HD camera in the front to make the center of gravity correct, typically a GoPro Hero 6,7,8 or DJI osmo action the one with piece with the two holes in it or is for a battery strap to go around the GoPro session 5 camera styles that are square.
It's designed for fpv.. specifly DJI Painless is the man! But two different minds work differently.. great video 💪💪👊👊
Yep. Thanks!
@@JohnVHRC drones allot of Help Vids.. I think the more the better.. I need to share some knowledge.. blue falcon I understand way better the guy who thinks he knows all and by end of his video ..you too will know he knows it all . 😂😂😂God bless and really thanks.. to get mine next week.. excited!! Like when I got my first drone.. now to break some distance records.. 😂😂😂
@@JohnVHRC question.. what motor and esc.. and servos come with kit. I got the pnp version. Didn't realize I needed FC?? Matek f7 wing one looks like be pick.. bit spendy.. bit on drones.. f7 way better.. more uarts.. Inav very close to beta Flight....
Funny thing about that, My instructions were so faded they were useless, the online instructions are the same. Glad yours appear to be legible!
Foam safe isn't needed for epo or epp foam, question is, how did you get it to stick? it always chips off....
I dont know, it works fine for me
Hey John appreciate the great video and time, what do you think the biggest lipo you could got in that bad boy?
I put 1 (pnp) in my cart, but I thought I seen a 3 blade carbon fiber prop. Any link to these?
2) what size (s & mah) lipo fits?
Thank you! 👍
Hi, what would be suitable motor out of the used 2216 1400kv.
I already got 2814 1050kv and going to by flying 4s battery , is it ok ?
Thanks for the video. What kind of glue do I need?
foam tac. foam safe ca.
ep 6000 can get it at walmart
Thank you sir I have been intrested in wings for quite a long time.I fly long range 8inch digital fpv quads. This one seems like a very good fit for me. Any immediate upgrades I should do? Build it right the first time I'll be using crossfire. Thank you in advance between you and Painless360 in fully sold on this being my first wing.
Upgrades? Ive only flown it box stock, works great.
Great video thanks, I would like to install the included ca hinges on this wing but looking at manual it shows were they go but not how. Do they glue to outside of foam or should the foam be hollowed out to except hinges if so foam is very thin were manual showing the hinges? I've searched far and wide for information on this but no luck. Thanks again
I would take a razor knife, make a slot/cut where the hinge would go in, and glue it into place. Always do a dry fit before gluing.
@@JohnVHRC Ok thanks I'll give it a try have you used these particular hinges before?
@@egtreadway4232 On wood airplanes, yes.
Is anyone else having an issue where the screws provided with the servo connection rods are too big for the holes in the servo horn?
👍😊
🤜 🤛
I have one can you put a (RTH) Return To Home on it ? and a Airplane in area alert system on it were can I get it ?
What glue did you use to put the ailevon flaps in with?
The spars and control horns? The ailevons come connected out of the box.
@@JohnVHRC the spar. Sorry I was multitasking haha the spars in the ailevons
@@attackfpv @08:00 ca glue
hello, what are those two wires that dont connect to nowhere, coming from esc? i dont find info about them
@19:00 I show it hooked up to my fpv camera, its power
You said "reflex is 1.5-2mm". What is "reflex"?
Thats where the elevons are both UP a little bit.
@@JohnVHRC So does “reflex” refer to the center resting position being trimmed upwards?
@@Jacobghel basically, both are trimmed for some up elevator
Dumb noob question sorry: Could something like this be modded to work just like the parrot disco? I mean for super long range maybe using a GSM or LTE module? Anyone knows this?
Hi can ı use 5s lipo and turnigy 3648 1450 kv motor ?
I dont know
my motor mount does not fit. and the wires from my motor either.. i have the kit 🤔
hi is it suitable for long range fpv?
Sure
What motor did u use?
The one it came with.
a month to get items
I thought this crap already came pre assembled if we got the PNP?