Looks awesome...i jest rattle canned green flames on my chalkboard black 2003 buick century.. But I've been thinkin of repainting it all lime green with some faux rust effect as im going more towards the apocolypse look
I feel like the car looks so much better now with this orange paint and the engine bay paint sets it off it’s something different the whole car really flows well together and it’s. Definitely worth painting the engine bay with it in the car much less work than pulling it
wow i didn't trigger because of the mismatched color :) love faded great song by alan walker. um, dip the dizzy cap if you can like the turbo compressor outlet :) love your work mate
Irvin Dorsey It would have been a little bit longer because you have to take both CV axles out and then carefully putting it back in. Either way though I could have done it all in a single night
It looks pretty good for the engine not having been removed. Fun idea for a project for the channel. Either do an AWD Civic, a RWD LS/RB/JZ Civic or even a frame swap sounds like a lot of fun.
Hello brother let me know painting engine bay with ordinary paint like u did ok or we should do VHT paint as bay is facing very much heat from the engine
chris Keim Dependswhat bed liner you use. Herculiner is more rough and sandpaper feel along with rustoleum truck bed liner, raptor liner has more of a smooth but bumpy feeling.
Black Pit Viper The paint was rustoleum but I didn’t clear it. Only because I don’t have enough money to buy any clear but i prefer to use 2K clear from spray max or speedokote 2k clear.
Unfortunately that paint isn't very chemical resistant. Did a motor cycle gas tank once and looked good until some gas dripped on it then it wrinkled and fell off in those spots and looked like crap.
Here is how you can donate to autism awareness! This don't go in my pocket in ANY WAY!
donate.nationalautismassociation.org/team/269326
#EducateDontVaccinate
wow its so educational, tnx for sharing idea
Looking good! Keep up the great job. I noticed the hood hinges too, that was a good idea. Can’t wait to see what’s next.
Looks awesome...i jest rattle canned green flames on my chalkboard black 2003 buick century.. But I've been thinkin of repainting it all lime green with some faux rust effect as im going more towards the apocolypse look
I feel like the car looks so much better now with this orange paint and the engine bay paint sets it off it’s something different the whole car really flows well together and it’s. Definitely worth painting the engine bay with it in the car much less work than pulling it
June_thegoat June yes indeed!!
This is now my official favorite channel! You rock buddy!!
Kirk Decker Well thanks! Appreciate that! I try to think outside the box
Great job on the masking and painting...looks like the engine was removed during paint.
SprayWayCustoms I have done so many bay painting jobs like this and no one really knew until I told them
The car is looking sick dude!
awsome job and the story why you did the colors is even better
looking awesome sir again you make it look so easy God bless till the next video
Rudy Flores It seems easy to me but im weird like that I guess lol
Good work. 👍
Man this turned out great!
Very nice man! And extremely colorful!
i agree and my children love it!
@@JamesDguy oh I could imagine looks like Lego pieces!
😍😍😍 looks sick! Also thanks for showing me how to do it with out pulling the motor!🤙🤙🤘
Wyatt Combs No problem im here to help!
Its be cool if you cut out some hood vents or something, probably hard to do now with truck bed coating on it.
Great job on the engine bay!
rmahi17 Thank you
Early morning video before work and tacos lol
Joey Dc4 Yumm tacos I literally just got done eating homemade burritos 👌🏻
@@JamesDguy lol if your ever in san Antonio you should try rolando super tacos basically a footlong taco with a pound of anything you want in it
Joey Dc4 😍😍😍
Great.job bro
Looking good 👀 👍 😍 🕶️
wow i didn't trigger because of the mismatched color :) love faded great song by alan walker. um, dip the dizzy cap if you can like the turbo compressor outlet :) love your work mate
Greg Winfield Thanks! Im gonna go with a red msd or VMS dizzy cap to throw some red in and also gonna look even better with the rad hoses
that looks very cool.
Rafael Angel Thanks
Nice job ! :) (french sub here :p)
Thank you and awesome! I love seeing where everyone is from! HELLO FROM TEXAS!!!
Great vid but I feel like pulling the swap would be faster if you have experience with it
Irvin Dorsey It would have been a little bit longer because you have to take both CV axles out and then carefully putting it back in. Either way though I could have done it all in a single night
Hey James, another trick is to use aluminium foil for thr lines against the firewall! Its faster and effective, great video though!
AK I didn’t have any but yes you are right lol
Sweet
I've never seen any of this before, I didnt know you could do that, woah! New car peep here
WELCOME!!!
GREAT JOB
IGNACIO CRUZ Thank you
Neat......keep it up pal
Oscar Duran Thanks will do
Good stuff
Good lessons
It looks pretty good for the engine not having been removed. Fun idea for a project for the channel. Either do an AWD Civic, a RWD LS/RB/JZ Civic or even a frame swap sounds like a lot of fun.
Link the Duelist That is way out of my price range and need a shop to do them but yea would make for good content if I could afford it
@@JamesDguy the AWD set up is affordable in comparison to the rest but I agree with you on that.
Link the Duelist Still hard to find all the stuff for it but would be better to have a garage or shop to do any of that.
Hello brother let me know painting engine bay with ordinary paint like u did ok or we should do VHT paint as bay is facing very much heat from the engine
Looks good. What’s that truck liner feel like? Is it rough to the touch?
Its odd its smooth but textured. Only way i can describe it. lol
I was wondering because I’m doing the bottom of my truck with it next week
chris Keim Dependswhat bed liner you use. Herculiner is more rough and sandpaper feel along with rustoleum truck bed liner, raptor liner has more of a smooth but bumpy feeling.
How has this held up 3 years later? Paint condition and sheen
Any tips how to remove broken bolts from battery stand/holder?thank you
robert vega I suck at removing broken bolts so I wouldn’t be any help 😑
Do you have a wire tuck video? Showing you what you have to do and add?
Dang I wanna paint my car but I have putty damage and it needs to fix lol. I gotta wait till summer if I’m going to have to do any painting.
Raferu T i know the struggle!
What sand paper grid did you use?
What brand you use
And what to use to protect it
Black Pit Viper The paint was rustoleum but I didn’t clear it. Only because I don’t have enough money to buy any clear but i prefer to use 2K clear from spray max or speedokote 2k clear.
whats the name of the purple bro?
quick question, why did you prime and then paint some part of car (right side of engine car bay) when you were already using primer+paint spray?
I was about to ask the same. Maybe using the lighter color over the dark gray wasn't ideal. The purple and dark blue covered pretty well by itself
What he did was ensure the color to come through yellow is a very touchy color for almost anything
Diff color wheels ???
Jesse James I’m thinking of hydro dipping the wheels lip with puzzle pieces
What intake setup are you running?
I'm here from the Ebay build
Ok
ANOTHER TIP IS TO GET A 36 INCH PIECE TUBE LIKE ON A CAN OF BRAKE CLEANER. GET IN TIGHT PLACES THEN WIPE OFF WITH RAG.
Looks like a 5 year olds car
thats......kinda the point lmao
Unfortunately that paint isn't very chemical resistant. Did a motor cycle gas tank once and looked good until some gas dripped on it then it wrinkled and fell off in those spots and looked like crap.
REBUILT ENGINE IN A CAN.