Amazing tutorial! Thanks for sharing. For an even better result, consider adding a speed control feature to the blower. This would make it even more versatile.
Gostei muito da manutenção da máquina. Pena que você não tirou o excesso de cola que ficou na bateria. Ficaria um serviço perfeito. Tupiara/ Brasil- Rj
Another impressive work sir you are awesome engineer thanks for the sharing this video sir 👍 😊❤❤ what Guage winding wire if you used please tell 😊thanks
Thank you very much sir, for your great video. Please tell me the price of your services fee for undermentioned for my needs. I'm appreciate, if you would give me or you recommend and proved me the technical books or issues or your technical advices or help regarding to remodeling of change a motor for adapt to battery type.
IF you could ,Please give me your advice to my question. 1) the Name of tool maker for this puller that you used on time: 4:04 in your video. i'm very interesting to get this item so that Japanese makers same product is too expensive for me 2)12 segment commutator: Detail SPEC and how to get this item. 3) the using wire : Detail SPEC and how to get this item. 4) winding tool? for the amateur (rod made of wood ): Let me know the tool's name and where you get it 5)i'm very glad, IF you give me especially advices when I will be winding The Wire on the amateur. 6) The motor unit (time on 11:29 on your video.)where used part of machines? starter? for motorcycle or EV bicycle? 7) Do you make the bush that colored blue in your video for use of liner for motor housing by your 3D Printer through your PC?. 8) The parts switch, motor brush , etc...Do you reusing existing facilities? Look forward to your replying. Best regards FM JP
De acuerdo con ella totalmente si el no quiere abordar el tema y se aleja de ella si puede que ver a su ex lo allá echo reabrir una herida y no sabe manejar lo pero al no querer hablar de eso la esta dañando a ella por su inseguridad si debería mudarse y hablar de lo que pasa con los padres de el ya que la ayudaron mucho.
There's not much material left to hold the front bearing behind the impeller. Also balancing wasn't properly done neither in the rewound motor nor the impeller (after drilling a hole initially). Excess glue wasn't removed either. This restoration video seemed to be rather rushed.....
Looks like it's running fine now. I'd like to see a follow-up, though, after extensive use. I always enjoy his videos. Although the excessive epoxy on the handle seemed out of character.
That impeller and housing are super inefficient. A ton of air escapes because of the housing and a ton of turbulence is created because of the way the impeller is designed. Weird that Mak!ta (even of old) would make such a substandard design into a product.
Amazing tutorial! Thanks for sharing. For an even better result, consider adding a speed control feature to the blower. This would make it even more versatile.
Beautiful restoration mister good job well done
Thank you very much!
This restoration blow my mind.
Лучший, спасибо за потраченное время! Здоровья тебе и твоей семье!
Now that I could use, great conversion.
great job! can you tell me what tool you used to press the bearing onto the motor shaft? thanks so much for the helpful video
100% real. good job. high quality work!!!
Gostei muito da manutenção da máquina. Pena que você não tirou o excesso de cola que ficou na bateria. Ficaria um serviço perfeito. Tupiara/ Brasil- Rj
A epóxi eu achei desnecessária mas se é pra dar rigidez não precisa tirar excesso, pode acabar desgrudando ela inteira ainda mais de plástico velho.
عمل اكثر من رائع ❤❤❤❤❤ احب عملك كثيرا
I’m glad you like my work
I felt through the screen as if a wire had gotten into my eye 😂😂😂😂
I always watch your videos and learn a lot! How many millimeters is this coil?
beautiful that rotor
I think so too!
what is the powder used for cleaning the housing pieces? Detergent?
Yes, correct
Another impressive work sir you are awesome engineer thanks for the sharing this video sir 👍 😊❤❤ what Guage winding wire if you used please tell 😊thanks
11-14 should be enough. Cause the current is around 20-30A
@@moya9450 thanks 😊
@@nathkrupa3463 No problem 🙏🏼
Good Job👌🏼
Thank you! 😊
Nice job!
Can you please add more explanations for the more complicated things you do in these videos?
Yes, I will do, thank you!
10:15 What is the transparent liquid? epoxy?
It is A&B epoxy
@@gear_show thanks for your good works and response.
where you got the battery and battery adaptor?
mantap sier good job
Thank you very much sir, for your great video.
Please tell me the price of your services fee for undermentioned for my needs.
I'm appreciate, if you would give me or you recommend and proved me the technical books or issues
or your technical advices or help regarding to remodeling of change a motor for adapt to battery type.
IF you could ,Please give me your advice to my question.
1) the Name of tool maker for this puller that you used on time: 4:04 in your video.
i'm very interesting to get this item so that Japanese makers same product is too expensive
for me
2)12 segment commutator: Detail SPEC and how to get this item.
3) the using wire : Detail SPEC and how to get this item.
4) winding tool? for the amateur (rod made of wood ): Let me know the tool's name and where you get it
5)i'm very glad, IF you give me especially advices when I will be winding The Wire on the amateur.
6) The motor unit (time on 11:29 on your video.)where used part of machines? starter? for motorcycle
or EV bicycle?
7) Do you make the bush that colored blue in your video for use of liner for motor housing by your 3D Printer through your PC?.
8) The parts switch, motor brush , etc...Do you reusing existing facilities?
Look forward to your replying.
Best regards FM JP
দারুন ভিডিও
Incredible wow❤
perfection! 💯
I like the way you did the battery connection looks meant to be
I’m glad you like it,
you should balance the propeller, as you have removed a hole.
Full HD video 😊
De acuerdo con ella totalmente si el no quiere abordar el tema y se aleja de ella si puede que ver a su ex lo allá echo reabrir una herida y no sabe manejar lo pero al no querer hablar de eso la esta dañando a ella por su inseguridad si debería mudarse y hablar de lo que pasa con los padres de el ya que la ayudaron mucho.
??
terbaik bossku
good
There's not much material left to hold the front bearing behind the impeller. Also balancing wasn't properly done neither in the rewound motor nor the impeller (after drilling a hole initially). Excess glue wasn't removed either. This restoration video seemed to be rather rushed.....
Looks like it's running fine now. I'd like to see a follow-up, though, after extensive use. I always enjoy his videos. Although the excessive epoxy on the handle seemed out of character.
awesome
Please modify the kitchen mixer
Hi sir plz make a diy cordless drill plz😊
You can find it in my channel
@@gear_show but I were watching u for near to ur beginning therefore I didn't see any such a vid yet
That impeller and housing are super inefficient. A ton of air escapes because of the housing and a ton of turbulence is created because of the way the impeller is designed. Weird that Mak!ta (even of old) would make such a substandard design into a product.
رائع ❤
Curious why he didn't mention neuromophic chips such a BrainChip?
Wow
❤❤🎉🎉🎉🎉
Thank you
👍💯
Thanks
imagine if a company made things like this, where you could take them apart and fix them yourself. good job.
👍👍👍❤
Круто 😊😊😊
I could've done the same if I had a lathe laying around.
Осталось найти токарный станок...
🇹🇷 selamlar .
👍😎🍺🍩🛠️🗜️
Fantastico!
If everyone like you,power tool would go bankrupt
Looks weak after the conversion. It's nowhere near these 16000 rpm.
86
1 logo is enough gear show. You put every place logo.
My videos were re upload every where without permission
Sloppy glue application ruined the whole impression.
Dàu rền
Anh chàng này hình như người Mỹ gốc Nhật, toàn thấy dùng Makita ^^