I’ve ported these Enforcer heads, they absolutely need the opening widened .100” and blended back to get 300 cfm out of them. Reduce the size of the guide boss, a blend of the bowl, widen the short side a bit. Nice quality casting.
I have a good friend in Australia that has a big warehouse like summit or jegs, he can buy the SBC dart copy for $60.00 a head, now you understand why they buy them. They are not cast in China, but Taiwan.
That's a good point you made about stock heads vs afr enforcer the prices aren't much when you have to do work on the stock heads so good know thank you for that information and definitely the flow number look way better on the afr so I can see a way better value already with afr
On BBC big port heads, have you ever explored giving the long port intake valves a 50 deg seat and the short ports a 45 deg. seat? Reason, widening the torque curve and getting rid of the torque dip often seen before the torque peak.
The TQ dip is in the Cam not the heads. Years ago I asked a GM engineer that same question, and he was in on the design team that did the BB head. He told me it was for packaging , go figure. When the DRC heads were designed by Warren Johnson what did he do . He got rid of all the long ports, and pointed all the ports at the cylinder wall, Humm , just like Ford does.
Whete the inlet valve rocker pokes through into the inlet port, could you fill that void with JB Weld and smooth to not only block the vacuum leak, but also stop any turbalance and smooth the flow a little?
An 823 gives up a ton of mid range torque vs the cathedral port heads on small displacement like 6.0-6.2 stuff but picks up a ton of power at the top. Tons of dyno testing on just RUclips to back that info up. But a good ported 243 can flow 300 plus that would be my choice for a 6.2 or less displacement street engine a more drag race oriented 408 I’d have a 823 style head 100%
Do you test valve sealing on new heads you review? Reason many say many heads need a valve job when new right out of box as they do not seal correctly. So people need to figure the added expense.
What is the largest valve size recommend on a 5.7 ls1. Im researching as looking to refreash my 04 VY HSV Clubsport here in New Zealand. Thinking of a simple bore clean,hone to 3.9. 4" crank to stroke it out to 383 6.3Ltr. With ITB for intake. My only thing is heads. Sgould i just port, and plane my standard 241 heads. Or look for some 243 heads which have the larger intake runner, and smaller combination chamber
Have you ported a set of these yet? I have a set im wanting to have ported and flowed before i put them on the new stroker motor. Want to see how they do vs a tfs 220.
@turbocarsmatterfastcarsmat2736I just bought a set last week lol. I got tired of not finding any solid info on them so I took the plunge. They are at least an 1/8" thicker in the deck surface than a factory gm casting. I didn't measure them, but having them side by side and just doing a visual, it was clear enough for me that even though they may not flow much more, the deck surface was worth it
@@WeingartnerRacing no, check Summit’s description, they are or at least were 2.02” and 1.60” I’ve bought a few sets of these castings and put 2.02s in them without issue.
@@peteJoseph-x3hI’m glad you read summit. However it’s too bad you didn’t read afr. If you had you would know they have two versions. This is the small bore that has 2.00/1.570.
Starting to look more and more like Ford FE head. Why can't chevy get away from there sacred cow push rod engine... because they are cheap and we can sell them at a premium price...made in China
Could you measure the deck thickness please? Pretty important for the turbo guys.
Thanks for the review and flow !
Not sure if I missed it, but I would love to see you do a video on port, velocity and port size and whether it matters once the engine is under boost.
I’ve ported these Enforcer heads, they absolutely need the opening widened .100” and blended back to get 300 cfm out of them. Reduce the size of the guide boss, a blend of the bowl, widen the short side a bit. Nice quality casting.
I have a good friend in Australia that has a big warehouse like summit or jegs, he can buy the SBC dart copy for $60.00 a head, now you understand why they buy them. They are not cast in China, but Taiwan.
Is that raw? I see raw castings on ebay every now and then.
It would be an interesting video if you upgraded the valve job and massaged the port. Curious how much flow you would gain.
You should show port volisity aswell. That's where the real comparison is between the aftermarket heads.
That's a good point you made about stock heads vs afr enforcer the prices aren't much when you have to do work on the stock heads so good know thank you for that information and definitely the flow number look way better on the afr so I can see a way better value already with afr
Thank you for your knowledge and video's USA 🇺🇸
Man thanks I love the reviews and info
On BBC big port heads, have you ever explored giving the long port intake valves a 50 deg seat and the short ports a 45 deg. seat? Reason, widening the torque curve and getting rid of the torque dip often seen before the torque peak.
The TQ dip is in the Cam not the heads. Years ago I asked a GM engineer that same question, and he was in on the design team that did the BB head. He told me it was for packaging , go figure. When the DRC heads were designed by Warren Johnson what did he do . He got rid of all the long ports, and pointed all the ports at the cylinder wall, Humm , just like Ford does.
Nice video, i have a 6.0, which heads should i get? 1501 or 1506, thanks. I really appreciate it
Thanks for more information. Need input, lol. Seriously though, it’s nice to know.
thanks Eric 🔥🔥🔥
Whete the inlet valve rocker pokes through into the inlet port, could you fill that void with JB Weld and smooth to not only block the vacuum leak, but also stop any turbalance and smooth the flow a little?
Have you done a review on some dart heads ?
Dart SHP Special High Performance Cylinder Heads
For the money pretty decent. A stick 823 casting flows more than either head if I remember correctly. Near 315. But great Review
An 823 gives up a ton of mid range torque vs the cathedral port heads on small displacement like 6.0-6.2 stuff but picks up a ton of power at the top. Tons of dyno testing on just RUclips to back that info up. But a good ported 243 can flow 300 plus that would be my choice for a 6.2 or less displacement street engine a more drag race oriented 408 I’d have a 823 style head 100%
@@jeredfowler7194 the low end tq loss is regained once you shave the 823 heads
Do you test valve sealing on new heads you review? Reason many say many heads need a valve job when new right out of box as they do not seal correctly. So people need to figure the added expense.
What is the largest valve size recommend on a 5.7 ls1. Im researching as looking to refreash my 04 VY HSV Clubsport here in New Zealand. Thinking of a simple bore clean,hone to 3.9.
4" crank to stroke it out to 383 6.3Ltr. With ITB for intake. My only thing is heads. Sgould i just port, and plane my standard 241 heads. Or look for some 243 heads which have the larger intake runner, and smaller combination chamber
Great video.Thank you
With these enforcer heads, if you add boost to them, would you have to change the spring pressure? Can you run them just out of the box
What’s the difference in deck thickness?
I'd like to know too. I emailed afr as I have a set of these and would like to know
.450 from what I'm told by some random person on the web...
So you wouldn’t recommend for a 6.0?
Mexico is a neighbor not an adversary.
Have you ported a set of these yet? I have a set im wanting to have ported and flowed before i put them on the new stroker motor. Want to see how they do vs a tfs 220.
I haven’t ported a set yet.
Deck thickness vs 243?
I emailed afr about this very question. From what I can tell looking at specs online they have a thicker deck than a stock 243 but not positive.
@@jersyboyy thanks! I'm considering just getting a set to try
Apparently they are .450 thick but I have to confirm that. Just regurgitating someone else.
@turbocarsmatterfastcarsmat2736I just bought a set last week lol. I got tired of not finding any solid info on them so I took the plunge. They are at least an 1/8" thicker in the deck surface than a factory gm casting. I didn't measure them, but having them side by side and just doing a visual, it was clear enough for me that even though they may not flow much more, the deck surface was worth it
243s, Canada, 799s, Mexico.
I got 243s on a mexico truck
I have 706 heads factory ones I’m thinking about getting afr heads 1501/1506 what’s the difference
Valve size
Just curious, what size are the chambers?
64
Here for the irony
The Enforcers are 2.020 and 1.60…
No. I measured 2.00/1.57
@@WeingartnerRacing no, check Summit’s description, they are or at least were 2.02” and 1.60” I’ve bought a few sets of these castings and put 2.02s in them without issue.
@@peteJoseph-x3hI’m glad you read summit. However it’s too bad you didn’t read afr. If you had you would know they have two versions. This is the small bore that has 2.00/1.570.
The AFR 210 heads both in small bore for 5.3 and ls1 variants have 2.00 and 1.57 valves. The SBC version of the enforcers are 2.02 and 1.60
@@WeingartnerRacing Readers always know more than the hands on professional!
Unreal..one reason why my machinist hung it up.
Starting to look more and more like Ford FE head. Why can't chevy get away from there sacred cow push rod engine... because they are cheap and we can sell them at a premium price...made in China
You sound smart to somebody thats completely stupid. A slow Ford jelous hater
still can't get out the 5s let alone 6s will hit dog holla everytime.
You mean like a NA 5.5L DOHC V8 that makes 670hp? An engine that existed at the time you made this dumb comment?