Hi, thank you for the vid. one suggestion - when your filming yourself... look into the actual camera - and not the screen of the camera . Right now its just weird because your not looking at the viewers but rather someone "next" to them :-).
hello mate, do you had any issue with the brake pads?i've seen it somewhere that the crv brake pads sits a little higher than the mini cooper rotors and that tsx pads are a perfect fit.
Will the bearing from an EF spindle fit the CRV one?? Bcus it's almost impossible to find Integra spindle in my country + If order from spare parts the prix is really expensive So can I use the CRV spindle with EF bearing assembly (4x100) ??
Could fit maybe the brake booster and cylinder from mini cooper s? The othe option is honda prelude uses also 280 mm discs ... I would go maybe brake booster + cylinder from honda prelude gen 4 + brake calipers with brackets and rotor from mini 280mm
I think minicooper brake booster will have different bolt pattern into the firewall and rod length. I’m not sure about the prelude unfortunately. People say brakes from dc5 integra work.
@@JarrodWillemse I just find honda accord calipers from 282 mm discs ... I am curious if fits, also ordered the brake cylinder +booster from this accod ( I think is 2.3 liter engine from 96)
@@JarrodWillemse If on my civic is now the 200 mm front brake discs ... And want to upgrade to 280 mm I need also the knuckle from the donor car? In my case I choose honda accord 2.3 liter has 282 mm discs rotor does not fit is a 4x114mm diagonal, ...
Will the crv assembly take a 300mm rotor disc? I want to bolt on a brembo oem caliper from an fn2 civic..and have 17 rims to clear the gap…all this on a civic EK. Thanks!
Btw bro they sell spacers between the lug nuts to fill in the gaps of those lugnuts rotors so theres no movement bro! I think 1320 performance sales those!
Calipers from a a Acura TL Tl brake pads TL rotor Civic ex spindal Or any 90 to 2000 Integra And a 3mil spacer on the spindle on the back of rotor and you all set
You don't need to upgrade the master but if you have 13/16 or smaller the pedal travel will be excessive. You can get away with 15/16 but 1" is ideal as it is what came with them originally.
Don’t do what this guy did I’m kinda confused What you need to do is get 99-00 civic si or ex knuckles crv brake caliper Mini cooper rotors TSX brake pads I don’t know the exact years but you should do the research if your really trying to do it with this set up you have type r brakes for less than $300
Hello. Great video. Just wanted to ask for the part number for the crv brake calliper? I tried to screen shot yours but as it was red was really hard to capture. Does the crv callipers have the code 17CL15VN stamped on it?
@@JarrodWillemse i know the center hole on the disc is 62mm and I think the center on the hub for civics is 56 or 54. I don't care about the studs if the disc can rotate left to right on te hub, I don't want it to move up/down, left/right
@@mihailpetrovici5044 once you bolt the wheel on it all centres and aligns. Just remember you need 260mm or type r spindles not all civics are 260mm and those that aren't have a smaller bore size.
If you have 240mm brakes you will need the Dc2 or type r spindle to be able to run a 282mm rotor and caliper. Calipers from Dc2/Ek type r, RD1 CRV or NSX fit.
The rotors are from a 2007+ Mini Cooper non-S. They are 280mm in diameter, 4x100 and have the same centre bore. I saw JDM yard have application specific ones now. www.jdmyard.com/dba-honda-civic-92-00-retro-fit-type-r-calipers-28
Thanks for uploading this video!! And showing a Diy and info description for what parts are needed! Thanks!
Thanks for watching!
Hi, thank you for the vid. one suggestion - when your filming yourself... look into the actual camera - and not the screen of the camera . Right now its just weird because your not looking at the viewers but rather someone "next" to them :-).
hello mate, do you had any issue with the brake pads?i've seen it somewhere that the crv brake pads sits a little higher than the mini cooper rotors and that tsx pads are a perfect fit.
So far no issues but I have only done around 4000kms.
Dope video. Thanks
Thanks!
Will the bearing from an EF spindle fit the CRV one??
Bcus it's almost impossible to find Integra spindle in my country
+ If order from spare parts the prix is really expensive
So can I use the CRV spindle with EF bearing assembly (4x100) ??
Im not 100% but i doubt they are the same. You could take the hub off and redrill to 4x100 then Re-press the studs in the new holes.
ALso they sell adaptor wheel spacers.
@@JarrodWillemse what about the axles?
Will EF axles( d series) fits the CRV hub??
Could fit maybe the brake booster and cylinder from mini cooper s? The othe option is honda prelude uses also 280 mm discs ... I would go maybe brake booster + cylinder from honda prelude gen 4 + brake calipers with brackets and rotor from mini 280mm
I have now the 200 mm disc in the front , I have gen 6 civic 4 doors from 2000
I think minicooper brake booster will have different bolt pattern into the firewall and rod length. I’m not sure about the prelude unfortunately. People say brakes from dc5 integra work.
@@JarrodWillemse I just find honda accord calipers from 282 mm discs ... I am curious if fits, also ordered the brake cylinder +booster from this accod ( I think is 2.3 liter engine from 96)
@@JarrodWillemse If on my civic is now the 200 mm front brake discs ... And want to upgrade to 280 mm I need also the knuckle from the donor car? In my case I choose honda accord 2.3 liter has 282 mm discs rotor does not fit is a 4x114mm diagonal, ...
Will the crv assembly take a 300mm rotor disc? I want to bolt on a brembo oem caliper from an fn2 civic..and have 17 rims to clear the gap…all this on a civic EK. Thanks!
I'm not sure. Unfortunately I haven't tried that.
nice video mate👍
do you know vtir dc2 1998 model front kunckles can fit crv calipers ?
They should fit.
Great video nice setup, I would add type R mini cooper brake rotor lug centric spacers eBay 35.00 good luck
Can you post the link I’ll check it out!!
I sent it
could you post a link
@@SUPERADIHASH i posted the links in the description
Btw bro they sell spacers between the lug nuts to fill in the gaps of those lugnuts rotors so theres no movement bro! I think 1320 performance sales those!
Cheers yeh some other guy commented the same. It seems to be fine without them.
If you want true bbk is 05 to 08 Acura TL non type s caliper piston is bigger and the rotor are 300mm this is in my 95 civic sedan ex
That sounds great! I didn’t know that it could work. Thanks for the idea.
What is needed to do this bbk set up)
Calipers from a a Acura TL
Tl brake pads
TL rotor
Civic ex spindal
Or any 90 to 2000 Integra
And a 3mil spacer on the spindle on the back of rotor and you all set
@@lgutierrez4431 what wheel size are you running and what do you recommend as far as wheel size and off set ?
@@licker1997 hello I have rota gt3 16x7 offset 35 winter and summer racinghart type c
17x7.5 offset 40
Is this the same as doing a 07 280 mm rotor from a Mini Cooper with a crv caliper?
Yes that is what I did and it looks like jdm yard have an application specific one now.
Do I need to change proportion valve and what model can I take the booster and master
So I noticed you showed the front rotors and what they were from. But what about the back rotors? And how many mm are they?
Hi The rear rotors are just a stock EK civic. Same size just slotted.
cheers, are you sure you need to upgrade master cylinders? and are 98-01 non abs masters the equivalent?
You don't need to upgrade the master but if you have 13/16 or smaller the pedal travel will be excessive. You can get away with 15/16 but 1" is ideal as it is what came with them originally.
What do u need to make the CRV hub work? Curious what u need to go to a full 5 stud setup?
You need a driveshaft with a bigger spline at the hub end the rest works fine
Don’t do what this guy did I’m kinda confused
What you need to do is get 99-00 civic si or ex knuckles crv brake caliper
Mini cooper rotors
TSX brake pads
I don’t know the exact years but you should do the research if your really trying to do it with this set up you have type r brakes for less than $300
How many pistons do the crv calipers have ?
I’m pretty sure the rd1 is single piston
What wheel profile are you running on mate?
I have subscribed too!
15x8+30. Thanks
Hello. Great video.
Just wanted to ask for the part number for the crv brake calliper? I tried to screen shot yours but as it was red was really hard to capture. Does the crv callipers have the code 17CL15VN stamped on it?
Sorry actually got a good print screen. It definitely has that part number on it. Thanks!
No worries glad I could help!
Where did you get ball joint tool?
Super cheap auto. You can get then anywhere even eBay.
how would you go about doing this on a ek cxi? can i use the stock spindles? and directly bolt on the crv calipers?
Yeh if your car already has the 262mm rotors+spindle then all you need is the new discs and caliper.
naruto got old and started fixing cars
Not sure if compliment but thank you haha
will this set up clear stock 15inch wheels
No idea bro. Most likely not. I had some other 15” rims and they hit. My buddy club P1s have no problem
i see. maybe a 5mm spacer would help with abit of clearance
@@kahvang7983 for me it hit on the barrel so no amount of spacing would help. I ended up grinding the caliper.
ummmm.. whats the spec on your p1
im planning to go with this route running with these wheel spec
15.7 +38 offset
@@kahvang7983 15x8+32
do the disc align perfect with the spindle or it could stay off centered?
The centre bore is the same. But when you first put the disc on it sags as the studs on the civic aren’t as big.
@@JarrodWillemse i know the center hole on the disc is 62mm and I think the center on the hub for civics is 56 or 54. I don't care about the studs if the disc can rotate left to right on te hub, I don't want it to move up/down, left/right
@@mihailpetrovici5044 once you bolt the wheel on it all centres and aligns. Just remember you need 260mm or type r spindles not all civics are 260mm and those that aren't have a smaller bore size.
@@JarrodWillemse yes, ok, I have the 262mm brakes on the facelift. Thank yoi for the tutorial
Hello bro . What caliper suitable for honda sr3/sr4 if i wan upgrade my brake from 240mm rotor to 282mm rotor?
If you have 240mm brakes you will need the Dc2 or type r spindle to be able to run a 282mm rotor and caliper. Calipers from Dc2/Ek type r, RD1 CRV or NSX fit.
Ive seen elsewhere that you need a shim behind the disc with this setup, do you really need it ?
Nahh all good for me. Some people use some on the wheel studs but the bore size matches the spindle fine.
@@JarrodWillemse Awesome, going for the same setup
What model and year mini cooper did the rotors come from? Having a hard time finding them with just the part number
The rotors are from a 2007+ Mini Cooper non-S. They are 280mm in diameter, 4x100 and have the same centre bore. I saw JDM yard have application specific ones now. www.jdmyard.com/dba-honda-civic-92-00-retro-fit-type-r-calipers-28
what year crv are the calipers off thanks
1997-2001