I just got my skateboard and it’s a ton of fun. Unfortunately I have fallen off twice 😂 not funny because I got hurt but it’s so worth it 😂 buying the protective gear soon lol I find that the tires get used pretty fast wish they were so expensive.
Great videos Russ, very helpful. Fellow florida ek8 guy here, any chance small parts like road tires, tubes, etc will be stocked in Florida so an order could be send quickly in the future? Hoping to get some road tires in the future. Thanks brother
Hi just wondering what the size of the silver spacer? I have a second hand endeavour s and went to change a tube. Seems like it was already missing. Could not see these on the site
I have a new board. The big japoneses bearings look solid but the front wheels start to make a strange cracking noise. I am not confident at all with front wheels that may block any time. I bought new bearings to see if it fixes the problem. How to push them out doing no damage to the wheel, please?
I have the Endeavor S & the rear tires are already bald down to the thread. Only ridden for couple weeks. The knobby tires wears down really quick on street. Do they offer pneumatic street tires for the Endeavor S? Also, on Propel website it's quite confusing how much a complete set will cost. I appreciate the the help thanks.
Sure, here you go. I inked the cheapest but they are popular (amazon,etc) www.ebay.com/itm/203656347211?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1HHyQZNCsT5-8KtfHkJeYtQ77&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=203656347211&targetid=1262906534602&device=c&mktype=&googleloc=9012211&poi=&campaignid=15275224983&mkgroupid=131097072938&rlsatarget=pla-1262906534602&abcId=9300697&merchantid=116334761&gclid=CjwKCAiAzrWOBhBjEiwAq85QZxBwrs7ZW_2WsuKhMfpmsbIUOhNERMpcGP1b49p-_BZzrUhI5DllUhoCvLEQAvD_BwE
English is not my native language so, i will apologise in advance, and try to be as clear as posible. So i am having this clicking sound in one of my tires. I dont understand in tour video how you fix it. Which nut i have to tighten up ?
Tighten the 5 lug nuts and make sure they are all snug. If not that, tighten axle screw a hair. If that doesnt do it, take it apart and re-seat the spacer in the middle
Great tutorials keep them going. I have a question i just received my Propel Pro amazing board btw! What PSI should the all terrain tires that came with it should be at? And should there be a general rule for a different PSI for street riding vs off road riding? Thanks
@@derekbruhl5168 The general rule is for street, you want them right at the recommended PSI. For offroad, let some out. Im running the 7's now @ 55 lbs
Can you please do a video on intalling bindings. let us know what bindings you use which look like S2's and maybe on how to install trampa bindings. but any binding tutorial would be greatly appreciated.
Sorry man,There wont be a video for that as adding bindings voids warranty. For some riders like myself who do all my own repairs and upgrades, its worth it but asa rule, it would be wrong to build a tutorial for something that voids the warranty. The half hook or s2 bindings work but a full binding like a trampa or an MBS will definitely damage the battery. We are developing binding mounting system for future models.
@@propelvirtualgarage963 when you say for future series are you saying the binding mounting brackets your developing won't fit on the current endeavor pro? If they will fit I'll wait for you guys to come out with the brackets I just want to clarify that they will work with the current endeavor pro?
@@boysandtheirtoys1094 No, the first binding system we are coming out with wont work on the series 1 pro. I have half hooks on mine though and I think they are perfect for that board. Something you might want to look at. They void the deck warranty but Ive never seen a deck break as our decks dont see the stresses a normal esk8 does because it sits on a full chassis vehicle
@@propelvirtualgarage963 ok I'll look into them I appreciate the info. What company makes the half hooks and what model do you have that works well for you? Also what's the difference between the series 1 and series 2 pro? And when is the series 2 expected to come out?
Loving my Endeavor Pro, but are there are recommendations for what appears to be a wobbling right rear tire? I've taken it apart and cleaned the pulley and hub, but getting a pretty noticeable wobble that doesn't appear to be rectified via tightening. Perhaps I need to deflate and reseat the tube?
Just got my pro yesterday!!. Which air pump are you using. Live that design I love it so much. I'm betting I can get crazy range on mine. I weigh 109 lbs 🤣
@@propelvirtualgarage963 hey sorry to bug you guys again. Just got the compressor. Love it. Sadly had it all in the backpack. Left it behind somewhere :(. So my question is. Where or how can I get a new hex tool ? The special one that works for tuning
@@StonerDeer here you go www.wihatools.com/ball-end-hex-metric-l-keys-long-arm?gclid=Cj0KCQjwnNyUBhCZARIsAI9AYlHO332sPVWtxDylFuE6uZqIfQWB-a4ZuDONSIDtvu97hjRJgio4mVwaAjctEALw_wcB
Absolutely just turn remote off. Now hold both buttons at once and hidden menu will appear. Use thumb wheel to scroll and button to select. Reply here again if you have any problems or find me on FB for faster reply ( J. Russell Thetonia)
Depends on which tire you are using but the max psi is printed on the side. I personally ride right at max psi on the street and lose 10 lbs if Im going offroad
I am under the impression the tire from this video is slightly different from the on I saw on other videos - which seemed to be more offroad oriented. Are there different profiles ?
@@iAmMrHD &' Street tires ALLLLLL day, love these so far and they are wearing rather well too. Nothing lasts on these roads. I was told its because they mix shell into the pavement.,....shrugs,lol
Wont be in the immediate future, hoping to have something approved for the 2022 line. The binding we are working on is more like an MBS F5, a padded, full binding
Thank you so much for coming out with this video series! It has been immensely helpful since I got my Endeavor.
Youre very welcome, many more coming.
I just got my skateboard and it’s a ton of fun. Unfortunately I have fallen off twice 😂 not funny because I got hurt but it’s so worth it 😂 buying the protective gear soon lol I find that the tires get used pretty fast wish they were so expensive.
That valve groove on the wheel rim is cool.
So much easier compared to my Eovan 175mm wheels, wow! Much better design.
I'd definitely put blue loctite on those screws though...
this is an excellent video
Great videos Russ, very helpful. Fellow florida ek8 guy here, any chance small parts like road tires, tubes, etc will be stocked in Florida so an order could be send quickly in the future? Hoping to get some road tires in the future. Thanks brother
Yessir, The parts stock supply will be here by the end of October
FInd me on FB, J Russell Thetonia see which groups we are both in
Are parts in stock here in FL yet? That would be amazing
Hi just wondering what the size of the silver spacer? I have a second hand endeavour s and went to change a tube. Seems like it was already missing. Could not see these on the site
Do you have any suggestion about how can i replace 8 inchs tires to 10 inchs tires? Or do you have any link about that? thank you!!
Anyway to get the tires without the $60 in shipping?
I have a new board. The big japoneses bearings look solid but the front wheels start to make a strange cracking noise. I am not confident at all with front wheels that may block any time. I bought new bearings to see if it fixes the problem. How to push them out doing no damage to the wheel, please?
Thats just the spacer clicking. You can reseat it if its bothering you but no damage is occurring, not dangerous
I have the Endeavor S & the rear tires are already bald down to the thread. Only ridden for couple weeks. The knobby tires wears down really quick on street. Do they offer pneumatic street tires for the Endeavor S? Also, on Propel website it's quite confusing how much a complete set will cost. I appreciate the the help thanks.
Thank you for your time and videos.
Do you have a link to your handy air pump?
Sure, here you go. I inked the cheapest but they are popular (amazon,etc)
www.ebay.com/itm/203656347211?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1HHyQZNCsT5-8KtfHkJeYtQ77&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=203656347211&targetid=1262906534602&device=c&mktype=&googleloc=9012211&poi=&campaignid=15275224983&mkgroupid=131097072938&rlsatarget=pla-1262906534602&abcId=9300697&merchantid=116334761&gclid=CjwKCAiAzrWOBhBjEiwAq85QZxBwrs7ZW_2WsuKhMfpmsbIUOhNERMpcGP1b49p-_BZzrUhI5DllUhoCvLEQAvD_BwE
@@propelvirtualgarage963 Thank you, can't wait to get my board. Hopefully, end of January.
@@propelvirtualgarage963 I set the pump to a preset # but, it doesn't stop when it should or does it take awhile. Have you had this issue?
@@miked250 No, never, mine always shuts off, sounds defective.
English is not my native language so, i will apologise in advance, and try to be as clear as posible.
So i am having this clicking sound in one of my tires. I dont understand in tour video how you fix it. Which nut i have to tighten up ?
Tighten the 5 lug nuts and make sure they are all snug. If not that, tighten axle screw a hair.
If that doesnt do it, take it apart and re-seat the spacer in the middle
Are there any videos on how to remove the deck?
2 lines of 6 screws
They run above the edge of the battery box
Peel back the corners of the edge grip tape segments to locate screws
Great tutorials keep them going. I have a question i just received my Propel Pro amazing board btw! What PSI should the all terrain tires that came with it should be at? And should there be a general rule for a different PSI for street riding vs off road riding? Thanks
I run mine at 40 psi but its all personal preference
@@propelvirtualgarage963 thanks for the tip!
@@derekbruhl5168 The general rule is for street, you want them right at the recommended PSI. For offroad, let some out.
Im running the 7's now @ 55 lbs
If you run them too soft, it affects your range
Can you please do a video on intalling bindings. let us know what bindings you use which look like S2's and maybe on how to install trampa bindings. but any binding tutorial would be greatly appreciated.
Sorry man,There wont be a video for that as adding bindings voids warranty. For some riders like myself who do all my own repairs and upgrades, its worth it but asa rule, it would be wrong to build a tutorial for something that voids the warranty. The half hook or s2 bindings work but a full binding like a trampa or an MBS will definitely damage the battery.
We are developing binding mounting system for future models.
@@propelvirtualgarage963 when you say for future series are you saying the binding mounting brackets your developing won't fit on the current endeavor pro? If they will fit I'll wait for you guys to come out with the brackets I just want to clarify that they will work with the current endeavor pro?
@@boysandtheirtoys1094 No, the first binding system we are coming out with wont work on the series 1 pro.
I have half hooks on mine though and I think they are perfect for that board.
Something you might want to look at. They void the deck warranty but Ive never seen a deck break as our decks dont see the stresses a normal esk8 does because it sits on a full chassis vehicle
@@propelvirtualgarage963 ok I'll look into them I appreciate the info. What company makes the half hooks and what model do you have that works well for you? Also what's the difference between the series 1 and series 2 pro? And when is the series 2 expected to come out?
Loving my Endeavor Pro, but are there are recommendations for what appears to be a wobbling right rear tire? I've taken it apart and cleaned the pulley and hub, but getting a pretty noticeable wobble that doesn't appear to be rectified via tightening. Perhaps I need to deflate and reseat the tube?
Take tire off and pull the hub apart. Make sure spacers are set properly and put back together
@@propelvirtualgarage963 thank you! Love the board and really appreciate the guidance! You guys have put together a great machine 😊
Looks like the inner spoke is attached to the wheel pulley!! Can that be separated?
I’d like to get both spokes powder coated if possible
They can be separated. Can be tricky getting them back together but doable
@@propelvirtualgarage963 Thanks, appreciate your time and videos.
Just got my pro yesterday!!. Which air pump are you using. Live that design I love it so much. I'm betting I can get crazy range on mine. I weigh 109 lbs 🤣
Nevermind I found it. Used the words "pocket compressor".
@@StonerDeer Xiaomi is the brand
@@propelvirtualgarage963 hey sorry to bug you guys again. Just got the compressor. Love it. Sadly had it all in the backpack. Left it behind somewhere :(. So my question is. Where or how can I get a new hex tool ? The special one that works for tuning
@@StonerDeer Send an email to services@ridepropel.com
@@StonerDeer here you go
www.wihatools.com/ball-end-hex-metric-l-keys-long-arm?gclid=Cj0KCQjwnNyUBhCZARIsAI9AYlHO332sPVWtxDylFuE6uZqIfQWB-a4ZuDONSIDtvu97hjRJgio4mVwaAjctEALw_wcB
how about the settings on the remote should I leave it as is?
Yes unless you wish to change from KPH to MPH
@@propelvirtualgarage963 hi , i have model S. Great board! Can I change speedometer from MPH to KMH?
Greetings from Poland!
Absolutely just turn remote off. Now hold both buttons at once and hidden menu will appear.
Use thumb wheel to scroll and button to select.
Reply here again if you have any problems or find me on FB for faster reply ( J. Russell Thetonia)
@@propelvirtualgarage963do the 7" Street tires fit on the same wheel as the 8" tires that come on the new Endeavor GT?
@@kbrown229 yes, they do
How much psi for tire!
Depends on which tire you are using but the max psi is printed on the side. I personally ride right at max psi on the street and lose 10 lbs if Im going offroad
ANY VIDEO ABOUT CHANGING DAMSGE MOTOR ...HELP ME PLEASE IM IN SOUTH BEACH ...ANY official service center close ??
I am under the impression the tire from this video is slightly different from the on I saw on other videos - which seemed to be more offroad oriented. Are there different profiles ?
He has a street tread tire installed which you can buy separately on the propel website.
Thanks Qbert. Yes, the Endeavors come with an 8" knobby but we also offer a 7" street tire as seen here.
@@propelvirtualgarage963 Do you recommend knobby or street tires for FL streets?
@@iAmMrHD &' Street tires ALLLLLL day, love these so far and they are wearing rather well too. Nothing lasts on these roads. I was told its because they mix shell into the pavement.,....shrugs,lol
@@propelvirtualgarage963 Thank you. Do you have stock of the Endeavors in Siesta Key? Trying to get around that super long shipping time.
Can tubes be patched like a bike tire?
Yes.
Are you guys going to sell those bindings anytime soon?
Wont be in the immediate future, hoping to have something approved for the 2022 line. The binding we are working on is more like an MBS F5, a padded, full binding
@@propelvirtualgarage963 Sounds great. Is there a mounting spot hidden under the grip tape on the deck?
@@fortystories7748 There will be if we approve a stock binding option for 2022