Io non ho l’attacco xt30 e xt60 in entrambi i lati ma solo da una parte xt30! in più ho in dotazione un cavo corto 4 pin per lato, il cavo lungo xt30 che finisce a 2 pin dalla parte opposta di cui parlavo all’inizio, in più un modulo elettrico senza scatola protettiva che non so come collegarlo e metterlo! Il bottone fisico sulla boccola per accensione e spegnimento fari non c’è!Illuminatemi grazie su come devo collegarli e farli funzionare senza nemmeno il bottone fisico? Grazie io sono possessore in un Endeavor 2S
I just got mine and I tell you, you guys should just offer it already installed! Not only is it a pain in the butt, we are wasting material like the metal plate that we throw away.
The plate is replaced with a new one that has a power button. Old one is no longer needed. like upgrading your car to halogen lamps when the stock ones are old, no need to keep the originals
There could be a recycling/trade in program if the badge is still new... Send it back and get $10 off your next order or something. Or just ship all new boards with the connections already integrated. The connectors themselves can't add that much to the cost of the boards, and you could still sell the light kit separately.
So how to select the brake function mode, on the tail light - its not covered in the instructions? Also what's the rubbery clip bit for (maybe not required when fitting to esk8?)
The rear light is from a bike kit so we added the handlebar/seat post mount in case you wanted to use it on both. To scroll to other light functions, hold down the power button till you get to next mode and release. each time you do that,you'll get a different pattern
Hello, is it possible to put a second battery in a Endevaor S ? How to connect both to the esc ? Thanks for your answer, or maybe a video about this ;-)
Hi can you make a video or help me change the connector p ece on my Endeavor 1? It has a small protruding part that buds up against the truck that part broke off when I crashed. Customer service said they designed it like that but its a pain in the butt to replace. So im stuck needing to replace it. Please help The part is called Connector on the website
I can but it wont be for a bit. If you want to find me on fb, I can walk you through it, its pretty easy (J. Russell Thetonia) The big thing is you need a small butane kitchen torch to break the loctite seal on the screws, otherwise you just swap out the parts. Remove upper and lower control arms from the main body and reconnect to new one
@@propelvirtualgarage963 OMG sounds difficult. I will search you im not good at FB can we video chat there? Im afraid I might not apply loctite correctly and it fall apart after?
@@rustinroy9911 Im really not sure as I have them on a bunch of boards here and Im always grabbing the closest board to the street,lol I'll charge one up and run it down for you. Im going to guess at least 6 hours
They each have their own kit as the badges are different between Endeavor 1 and Endeavor 2 Endeavor 1 light kit- www.ridepropel.com/product/propelev-endeavor-light-kit/ Endeavor 2 light kit-www.ridepropel.com/product/endeavor-2-light-kit/
has anyone done this successfully without the setup that this guy has (e.g. Board bench with straps and tape) ? I asked if they could install the lights for me and they wouldn't and told me to watch this video and now i'm watching it it seems like a giant pain
Yeah, it's pretty easy with any old work bench. My board was secondhand, but if I were buying new I would MUCH rather the option to have them factory installed.
I would pierce the grip tape with as small of holes as I could, rather than peeling the tape off. If you do the holes right, it will stretch out the tape a little as you undo the screws, then when you put the screws back in the screw heads will completely cover up the holes and any imperfections in the tape. You will probably have to be inside the deck at some point any to do other maintenance or modifications.
Great product, I love the board. But the customer service is non existent. I recently ordered 2 light kits for my boards but they only sent one. Trying to get ahold of someone to remedy this issue, but still to this day no one has returned my emails. I’ve been reaching out to the at least once a week and still no reply. Buyer beware if you need help they will likely never respond.
Io non ho l’attacco xt30 e xt60 in entrambi i lati ma solo da una parte xt30! in più ho in dotazione un cavo corto 4 pin per lato, il cavo lungo xt30 che finisce a 2 pin dalla parte opposta di cui parlavo all’inizio, in più un modulo elettrico senza scatola protettiva che non so come collegarlo e metterlo! Il bottone fisico sulla boccola per accensione e spegnimento fari non c’è!Illuminatemi grazie su come devo collegarli e farli funzionare senza nemmeno il bottone fisico? Grazie io sono possessore in un Endeavor 2S
I heated the heck out of the these bolts. Stripped 3 out of 4....
I just got mine and I tell you, you guys should just offer it already installed! Not only is it a pain in the butt, we are wasting material like the metal plate that we throw away.
The plate is replaced with a new one that has a power button. Old one is no longer needed. like upgrading your car to halogen lamps when the stock ones are old, no need to keep the originals
@@propelvirtualgarage963 yeah but you know what I'm saying. Just have a board that has them installed in charge an extra 200 bucks!
There could be a recycling/trade in program if the badge is still new... Send it back and get $10 off your next order or something.
Or just ship all new boards with the connections already integrated. The connectors themselves can't add that much to the cost of the boards, and you could still sell the light kit separately.
Salve vorrei sapere se questo kit luci vanno bene per endeavor 2 s? Grazie
So how to select the brake function mode, on the tail light - its not covered in the instructions? Also what's the rubbery clip bit for (maybe not required when fitting to esk8?)
The rear light is from a bike kit so we added the handlebar/seat post mount in case you wanted to use it on both.
To scroll to other light functions, hold down the power button till you get to next mode and release. each time you do that,you'll get a different pattern
Hello, is it possible to put a second battery in a Endevaor S ? How to connect both to the esc ? Thanks for your answer, or maybe a video about this ;-)
You want to join the FB group "Propel Endeavor Modification Group", all kinds of ideas for you in there
Hi can you make a video or help me change the connector p ece on my Endeavor 1? It has a small protruding part that buds up against the truck that part broke off when I crashed. Customer service said they designed it like that but its a pain in the butt to replace. So im stuck needing to replace it. Please help The part is called Connector on the website
I can but it wont be for a bit. If you want to find me on fb, I can walk you through it, its pretty easy
(J. Russell Thetonia)
The big thing is you need a small butane kitchen torch to break the loctite seal on the screws, otherwise you just swap out the parts. Remove upper and lower control arms from the main body and reconnect to new one
@@propelvirtualgarage963 OMG sounds difficult. I will search you im not good at FB can we video chat there? Im afraid I might not apply loctite correctly and it fall apart after?
@@highestvirtue1892 no, loctite is just a liquid. You put a couple drops on the threads
yes, we can chat
Jesus did you use enough loctite?! all these bolts are stripped out
All which bolts? Did you apply heat first? Green is used specifically so this isnt an issue
How long does a fully charged taillight last?
Depends how you use it. 2 or 3 nights for me.
USB plugs into the rear and its easily removable from the mount
@@propelvirtualgarage963 was just curious about how many hours it runs
@@rustinroy9911 Im really not sure as I have them on a bunch of boards here and Im always grabbing the closest board to the street,lol
I'll charge one up and run it down for you.
Im going to guess at least 6 hours
Salve è possibile installare il kit luci su endeavor 2s? Perché sul sito dice che sono solo per endeavor s.!!!
They each have their own kit as the badges are different between Endeavor 1 and Endeavor 2
Endeavor 1 light kit- www.ridepropel.com/product/propelev-endeavor-light-kit/
Endeavor 2 light kit-www.ridepropel.com/product/endeavor-2-light-kit/
ENDEAVOR 2 S, non trovo quello giusto! ho paura di sbagliare…!!!
È fatto male il sito perché non specifica tra il 2s, o pro? Uno è marrone l’altro nero
Do the lights fit on the endeavor 1?
Different video
ruclips.net/video/-nw6XFmIpFo/видео.html
has anyone done this successfully without the setup that this guy has (e.g. Board bench with straps and tape) ? I asked if they could install the lights for me and they wouldn't and told me to watch this video and now i'm watching it it seems like a giant pain
also how do you do this without messing up the tape
Yeah, it's pretty easy with any old work bench. My board was secondhand, but if I were buying new I would MUCH rather the option to have them factory installed.
I would pierce the grip tape with as small of holes as I could, rather than peeling the tape off. If you do the holes right, it will stretch out the tape a little as you undo the screws, then when you put the screws back in the screw heads will completely cover up the holes and any imperfections in the tape. You will probably have to be inside the deck at some point any to do other maintenance or modifications.
Great product, I love the board. But the customer service is non existent. I recently ordered 2 light kits for my boards but they only sent one. Trying to get ahold of someone to remedy this issue, but still to this day no one has returned my emails. I’ve been reaching out to the at least once a week and still no reply. Buyer beware if you need help they will likely never respond.